Reactive Cobalt–Oxo Complexes of Tetrapyrrolic Macrocycles and N-based Ligand in Oxidative Transformation Reactions

High-valent cobalt–oxo complexes are reactive transient intermediates in a number of oxidative transformation processes e.g., water oxidation and oxygen atom transfer reactions. Studies of cobalt–oxo complexes are very important for understanding the mechanism of the oxygen evolution center in natural photosynthesis, and helpful to replicate enzyme catalysis in artificial systems. This review summarizes the development of identification of high-valent cobalt–oxo species of tetrapyrrolic macrocycles and N-based ligands in oxidation of organic substrates, water oxidation reaction and in the preparation of cobalt–oxo complexes.


Introduction
In biological systems, metalloenzymes, typically containing Mn, Fe and Cu centers, are known to catalyze a wide range of reactions including aliphatic and aromatic C-H hydroxylation, epoxidation, desaturation, and heteroatom (S, N or O) dealkylation or oxidation [1,2]. It is well known that iron-oxo species are the reactive oxidants in the catalytic cycle of heme [3] and non-heme iron enzymes [4]. Similarly, manganese-oxo complex has been suggested the key intermediate in oxygen-evolving center of photo-system II (PSII) [5][6][7]. The transition metal-oxo complexes of iron and manganese involved in artificial oxygen transfer and C-H bond activations reactions have been extensively reviewed [8][9][10][11][12][13]. Except for the early transition metal-oxo complexes, high-valent metal-oxo complexes of late transition metals, particularly cobalt-oxo complexes, are also highly reactive transient intermediates in cobalt-catalyzed C-H bond activation and O-O bond formation reactions [14][15][16], and they are considered to be more reactive then related iron-oxo species due to a weak metal-oxygen bond [17,18]. Currently, clean energy production by maneuvering natural photosynthesis in water oxidation reactions to develop artificial photosynthesis [19][20][21] for efficient water splitting is a hot topic of research [22][23][24]. In particular, the cobalt oxides are often used materials for water oxidation to generate molecular oxygen [25][26][27][28]. The high-valent cobalt-oxo complexes of N-based ligand can be implicated as reactive species in the O-O bond-forming event during water oxidation [29,30]. Furthermore, cobalt complexes based on tetrapyrrolic macrocycles are often used in mimicking the peroxidase-like activity for the selective oxidation of organic substrates via high-valent cobalt(IV)-oxo intermediates [31,32]. Obviously, in the study of the reactive oxidants in these catalytic reactions it is essential to provide insight into their mechanism of reaction, allowing us to probe the critical step in these challenging reactions. However, the isolation and identification of these transient intermediates is considerable challenge. The cobalt-oxo complexes are not stable because cobalt has large number of

Cobalt-Oxo Species Involved in Oxidation of Organic Substrates
Cobalt-oxo species are involved in many of oxidative and C-H bond activation reactions. The ligands used to generate cobalt-oxo species play a key role in stabilizing cobalt-oxo species. Also, to mimic the enzymes-like environment, different types of support are used as protein backbone for example cellulosic fiber and multiwall carbon nanotubes. These supports cannot alter the reaction mechanism however, precisely control the generation of reactive intermediate, which also determines the activity, durability and stability of the complexes [36][37][38].
Nam et al. reported [39] the catalytic oxidation of alkene and alkane using cobalt-substituted polyoxotungstate and employed different oxidants such as iodosylbenzene, potassium monopersulfate and m-CPBA. Cobalt-substituted polyoxotungstate was proved to be a good catalyst. They proposed the involvement of different cobalt-oxo species with the different oxidants. Two possible species may form with iodosylbenzene, high-valent cobalt(V)-oxo 1 and cobaltiodosylbenzene adduct 2 (Scheme 1). They suggested that complex 2 is responsible for oxygen This review comprehends the high-valent cobalt-oxo complexes of tetrapyrrolic macrocycles and N-based ligands reported to date, along with outlooks in this intriguing research area. It has been divided into three sections: identification of cobalt-oxo species involved in oxidation of organic substrates; identification of cobalt-oxo species involved in heterogeneous and homogeneous water oxidation reactions; and preparation of high-valent cobalt-oxo complexes.

Cobalt-Oxo Species Involved in Oxidation of Organic Substrates
Cobalt-oxo species are involved in many of oxidative and C-H bond activation reactions. The ligands used to generate cobalt-oxo species play a key role in stabilizing cobalt-oxo species. Also, to mimic the enzymes-like environment, different types of support are used as protein backbone for example cellulosic fiber and multiwall carbon nanotubes. These supports cannot alter the reaction mechanism however, precisely control the generation of reactive intermediate, which also determines the activity, durability and stability of the complexes [36][37][38].
Nam et al. reported [39] the catalytic oxidation of alkene and alkane using cobalt-substituted polyoxotungstate and employed different oxidants such as iodosylbenzene, potassium monopersulfate and m-CPBA. Cobalt-substituted polyoxotungstate was proved to be a good catalyst. They proposed the involvement of different cobalt-oxo species with the different oxidants. Two possible species may form with iodosylbenzene, high-valent cobalt(V)-oxo 1 and cobalt-iodosylbenzene adduct 2 (Scheme 1). They suggested that complex 2 is responsible for oxygen transfer because cobalt cannot be obtained in +5 oxidation state. KHSO 5 and m-CPBA predict the involvement of cobalt(III)-oxygen adducts as oxygen transfer complex. Isotopically labeled water (H 2 18 O) is a useful experimental tool to investigate the involvement of high-valent cobalt-oxo species in cobalt-mediated oxygen atom transfer reactions, but all the attempts to obtain 18 O-labeled products have failed. Furthermore, porphyrins are extensively used to get stable metal-oxo complexes [13]. Therefore, porphyrins with a different electronic environment were used to stabilize cobalt-oxo species [40,41]. Cobalt(IV)-oxo [40] and cobalt(IV)-oxo porphyrin radical [41] were proposed to be involved in C-H bond activation reaction. These species are quite reactive towards the oxidation of alkane and alcohol, respectively. However, there is no experimental evidence to support presence of cobalt-oxo species due to instability. Likewise, a cobalt(IV)-oxo species was reported [42], based on the tetraanionic cobalt(II) complex of ( Br HBA-Et)H 4 , N,N -(ethane-1,2-diyl)bis(5-bromo-2-hydroxybenzamide), that provides a strong ligand field. Consequently, this specie was stable enough to be characterized by EPR and ESI-MS spectroscopy analysis. Also, the presence of high-valent cobalt(IV)-oxo porphyrin was reported during the oxidation of alcohol to benzaldehyde by molecular oxygen in the presence of isobutyraldehyde, using bifunctional hybride catalyst originated from cobalt tetra(4-sulfonatophenyl)porphyrinate anion [43] and a cationic meso-tetrakis (1-methyl-4-pyridyl) cobalt porphyrin immobilized in montmorillonite interlayers [44]. The presence of a cobalt(IV)-oxo specie was predicted by an 18 O-labeled experiment of product [43]. The turnover frequency and catalytic yield was higher in the prior case. Later, the cobalt(IV)-oxo porphyrin was generated [45]  Moreover, to mimic the enzyme activity for controllable catalytic oxidation, researchers made extensive efforts to develop and discover functional materials having properties intrinsic to enzymes. Many transition-metal complexes were prepared [49][50][51] to mimic the expected features of enzymes, such as selectivity and steric accessibility, but these do not present the said features due to the non-natural environment. A catalyst which is a replication of enzyme should possess a suitable cavity or cleft for accessibility of substrates and introduction of functional groups that act as active sites within the cavity [52,53]. Enzymatically inspired catalytic system was prepared by using cobalt tetraaminophthalocyanine (CoTAPc) as a catalyst supported by ordered-mesoporous-carbon (OMC) for controllable activation of hydrogen oxide (H 2 O 2 ) to generate stable cobalt-oxo intermediate [32]. Ordered-mesoporous-carbon provides the steric environment for a substrate to attach with active sites and protects the active sites against the external interface. However, a disadvantage of hydrogen peroxide is the formation of hydroxyl radical that is highly reactive, so it decreases the selectivity. A fifth ligand dodecylbenzenesulfonate (LAS) is employed to inhibit the production of hydroxyl radical. This fifth ligand also helps to generate high-valent cobalt(IV)-oxo specie by heterolytic cleavage of peroxide O-O bond. The involvement of cobalt-oxo specie was corroborated by the results of semiempirical quantum-chemical PM6 calculations. Similarly, a modification in the tetrapyrrolic macrocycle of cobalt tetraaminophthalocyanine (CoTAPc) was made by the attachment of epoxy compound 2,3-epoxypropyl triethylammonium chloride (EPTAC), to obtain a new catalyst with positively charged quaternary ammonium salt chain (OMC-CoTAPc-EPTAC) [31]. The modified catalyst displays high catalytic activity especially for negatively charged substrates. The free radical trapping EPR analysis using 5,5-Dimethyl-1-pyrroline N-oxide (DMPO) as a free radical scavenger did not detect DMPO-· OH and DMPO-· OOH signal, ruling out the free radical type mechanism. That is why, the cobalt(IV)-oxo complex was proposed as a reactive intermediate due to the heterolytic cleavage of O-O bond of peroxide. Moreover, cellulosic fiber could play the role of the protein backbone in enzymes, providing an enzyme-like environment with enhanced regioselectivity to remove organic dyes and improve the stability of intermediate generated. A catalyst was developed based on cellulosic fiber-bonded cobalt phthalocyanine catalytic entity to activate hydrogen peroxide in order to generate cobalt-oxo specie [54]. The reaction channel was controlled by linear alkylbenzene sulfonate (LAS). High-valent cobalt(IV)-oxo specie 4 was generated by the heterolytic cleavage of peroxide O-O bond and homolytic cleavage generate cobalt(III)-oxo specie 3 ( Figure 2). Moreover, to mimic the enzyme activity for controllable catalytic oxidation, researchers made extensive efforts to develop and discover functional materials having properties intrinsic to enzymes. Many transition-metal complexes were prepared [49][50][51] to mimic the expected features of enzymes, such as selectivity and steric accessibility, but these do not present the said features due to the nonnatural environment. A catalyst which is a replication of enzyme should possess a suitable cavity or cleft for accessibility of substrates and introduction of functional groups that act as active sites within the cavity [52,53]. Enzymatically inspired catalytic system was prepared by using cobalt tetraaminophthalocyanine (CoTAPc) as a catalyst supported by ordered-mesoporous-carbon (OMC) for controllable activation of hydrogen oxide (H2O2) to generate stable cobalt-oxo intermediate [32]. Ordered-mesoporous-carbon provides the steric environment for a substrate to attach with active sites and protects the active sites against the external interface. However, a disadvantage of hydrogen peroxide is the formation of hydroxyl radical that is highly reactive, so it decreases the selectivity. A fifth ligand dodecylbenzenesulfonate (LAS) is employed to inhibit the production of hydroxyl radical. This fifth ligand also helps to generate high-valent cobalt(IV)-oxo specie by heterolytic cleavage of peroxide O-O bond. The involvement of cobalt-oxo specie was corroborated by the results of semiempirical quantum-chemical PM6 calculations. Similarly, a modification in the tetrapyrrolic macrocycle of cobalt tetraaminophthalocyanine (CoTAPc) was made by the attachment of epoxy compound 2,3-epoxypropyl triethylammonium chloride (EPTAC), to obtain a new catalyst with positively charged quaternary ammonium salt chain (OMC-CoTAPc-EPTAC) [31]. The modified catalyst displays high catalytic activity especially for negatively charged substrates. The free radical trapping EPR analysis using 5,5-Dimethyl-1-pyrroline N-oxide (DMPO) as a free radical scavenger did not detect DMPO-˙OH and DMPO-˙OOH signal, ruling out the free radical type mechanism. That is why, the cobalt(IV)-oxo complex was proposed as a reactive intermediate due to the heterolytic cleavage of O-O bond of peroxide. Moreover, cellulosic fiber could play the role of the protein backbone in enzymes, providing an enzyme-like environment with enhanced regioselectivity to remove organic dyes and improve the stability of intermediate generated. A catalyst was developed based on cellulosic fiber-bonded cobalt phthalocyanine catalytic entity to activate hydrogen peroxide in order to generate cobalt-oxo specie [54]. The reaction channel was controlled by linear alkylbenzene sulfonate (LAS). High-valent cobalt(IV)-oxo specie 4 was generated by the heterolytic cleavage of peroxide O-O bond and homolytic cleavage generate cobalt(III)-oxo specie 3 ( Figure 2).  The in situ X-band EPR analysis was conducted at room temperature in the presence of LAS demonstrating a signal at g eff = 2.099 identifying the presence of Co IV with spin state (S = 1 2 ). Usually, metal-oxo species have been detected at low temperature [55,56]; a high oxidation state of PcCo IV =O was observed at room temperature, presenting high stability of complex, auto-oxidation protected by cellulose matrix. Cellulosic fiber bonded cobalt phthalocyanine (CoPc) can also activate peroxymonosulfate [57]. The oxidation activity of catalyst is remarkably enhanced in the presence of bicarbonate ion (HCO 3 − ) due to the generation of (PcCo while the electron deficiency favors the heterolytic cleavage with generation of (Co IV =O)10. The tendency of generation of (Co IV =O) was in order 8 > 7 > 9. Density functional theory also demonstrated that electron withdrawing group helps in pulling electron and lowering the corresponding energy levels. Keeping in mind the concept of the "oxo wall" [63], another pathway (a) also proposed, heterolytic cleavage of O-O generate the ligand based radical intermediate OH-Co III (opbaX)11, in which ligand transfers one electron to cobalt and cobalt transfers it to oxygen. Our group recently [64] reported the catalytic oxidation of alkene using four cobalt(III) corroles of different electronic environment F0C-Co, F5C-Co, F10C-Co and F15C-Co employing various oxidants. The in situ ESI HR-MS analysis of styrene oxidation with KHSO5 predicts the presence of high-valent cobalt(V)-oxo complex as active intermediate. The in situ X-band CW EPR analysis revealed a signal at g = 2.0135 for the presence of cobalt-oxo specie.

Cobalt-Oxo Species Involved in Water Oxidation Reaction
Water oxidation is a process that involved the four-electron-four-proton oxidation of water to evolve O2. In natural photosynthesis, sunlight is converted to chemical energy by the oxidation of water [20]. As a consequence, understanding nature's water oxidation mechanism in photosystem II has been the focus of research for the development of artificial water oxidation catalyst. The development of efficient water oxidation catalysts with minimal cost is a challenge [65][66][67][68]

Cobalt-Oxo Species Involved in Water Oxidation Reaction
Water oxidation is a process that involved the four-electron-four-proton oxidation of water to evolve O 2. In natural photosynthesis, sunlight is converted to chemical energy by the oxidation of water [20]. As a consequence, understanding nature's water oxidation mechanism in photosystem II has been the focus of research for the development of artificial water oxidation catalyst. The development of efficient water oxidation catalysts with minimal cost is a challenge [65][66][67][68] generated by the oxidation of surface group Co(III)-OH. At the fast site catalytic species, catalytic turn over frequency is at least 10 times more than slow site catalytic species, because it has no neighbor hydroxyl group. Furthermore, Stahl et al. reported [74] the water oxidation employing cobalt oxide as an electrocatalyst, and proposed the involvement of (Co IV -O) as reactive specie. The EPR analysis with signals at g-values 2.59, 2.17 and 1.99 revealed the presence of multiple paramagnetic species during water oxidation, possibly arising from (Co IV -O) sites in the catalyst with a different coordination environment. The mechanism of water oxidation is pH dependent, at acidic pH homogeneous catalysis leading to H 2 O 2 production, while at pH above 3.5 heterogeneous catalysis takes place, generating O 2 from four-electron water oxidation (Scheme 3). The oxidation of 12 produced 14 (12→13→14) corresponds to a 3H + /e − process. Subsequently, 1e − oxidation generated specie 15 corresponding to 7H + /3e − process. Further, oxidation of 15 afforded 16. A key step to evolve oxygen is the nucleophilic attack of water at 16 to produce 17 [75][76][77]. Under the acidic pH, the PCET-mediated formation of 11 was prevented (Scheme 3). The oxidation of 10 produced 18 that dissolve from surface. The intermediate specie 18 invoked the homogeneous oxidation of water to H 2 O 2 [78]. Similarly, bridging cobalt(IV)-oxo [79] and terminal cobalt(IV)-oxo radical [80] species were proposed as reactive catalytic sites for water oxidation, employing amorphous cobalt oxide. X-ray absorption near the edge provides the insight that the generation of high-valent (Co IV -O) depended on the potential applied and pH. The edge position of the spectra was taken at pH = 7 and pH = 9 differs by about 1.0 eV by keeping potential constant at 0.95 V, and edge position of the spectra were taken at pH = 7 by increasing electrode potential from 0.95 to 1.34 V differs by about 1.2 eV [79]. However, the study of cobalt-oxo species involved in water oxidation was difficult because in oxygen evolving catalysis (OEC), large number of spectroscopically active backgrounds species are present which limits their detection and characterization.
Molecules 2018, 23, x FOR PEER REVIEW 7 of 16 oxygen is the nucleophilic attack of water at 16 to produce 17 [75][76][77]. Under the acidic pH, the PCETmediated formation of 11 was prevented (scheme 3). The oxidation of 10 produced 18 that dissolve from surface. The intermediate specie 18 invoked the homogeneous oxidation of water to H2O2 [78]. Similarly, bridging cobalt(IV)-oxo [79] and terminal cobalt(IV)-oxo radical [80] species were proposed as reactive catalytic sites for water oxidation, employing amorphous cobalt oxide. X-ray absorption near the edge provides the insight that the generation of high-valent (Co IV -O) depended on the potential applied and pH. The edge position of the spectra was taken at pH = 7 and pH = 9 differs by about 1.0 eV by keeping potential constant at 0.95 V, and edge position of the spectra were taken at pH = 7 by increasing electrode potential from 0.95 to 1.34 V differs by about 1.2 eV [79]. However, the study of cobalt-oxo species involved in water oxidation was difficult because in oxygen evolving catalysis (OEC), large number of spectroscopically active backgrounds species are present which limits their detection and characterization. Consequently, suitable catalysts to reduce background active species are needed to design. Nbased ligands have attractive properties to be used as homogenous molecular water oxidation catalysts [81]. Recently, a significant number of catalysts are developed based on single site and multinuclear transition metal including Mn, Fe, Co, Cu, Ru and Ir [82][83][84][85][86][87]. The biggest challenge is to find a suitable coordination environment because the metal-ligand bond opposite a metal-oxygen bond can be compromised at higher redox level leading the catalyst to be susceptible to degradation [88]. So, single site N-based ligand homogeneous catalysts of cobalt were developed utilizing stable pentadentate ligand environment of 2,6-(bis(bis-2-pyridyl)methoxy-methane)-pyridine [89] and 6-(bis(bis-2-pyridyl)-methoxymethane)pyridine [30] for water oxidation. The electrochemical studies revealed that over pH range 7.6-10.3 an oxidation event was observed at +1. 43   Consequently, suitable catalysts to reduce background active species are needed to design. N-based ligands have attractive properties to be used as homogenous molecular water oxidation catalysts [81]. Recently, a significant number of catalysts are developed based on single site and multinuclear transition metal including Mn, Fe, Co, Cu, Ru and Ir [82][83][84][85][86][87]. The biggest challenge is to find a suitable coordination environment because the metal-ligand bond opposite a metal-oxygen bond can be compromised at higher redox level leading the catalyst to be susceptible to degradation [88]. So, single site N-based ligand homogeneous catalysts of cobalt were developed utilizing stable pentadentate ligand environment of 2,6-(bis(bis-2-pyridyl)methoxy-methane)-pyridine [89] and 6-(bis(bis-2-pyridyl)-methoxymethane)pyridine [30] for water oxidation. The electrochemical studies revealed that over pH range 7.6-10.3 an oxidation event was observed at +1. 43 [89,90]. An alternative pathway proposed that the attack of OHat [Co IV -OH] 3+ in the rate determining step will evolve O 2 [30]. Likewise, [Co IV -O] specie was proposed as reactive intermediate during water oxidation at basic pH using cobalt-porphyrins as catalyst [91]. Similarly, Groves and Wang reported [92] the single site homogeneous water oxidation catalyst, employing a series of cobalt porphyrins 19, 20 and 21 (Scheme 4). A high-valent Co IV -porphyrin cation radical acts as reactive intermediate. The electrochemical experiment provides the evidence for the formation of high-valent Co IV -O specie. The redox event at 250 mV vs. Ag/Cl reference represents the resting state of catalyst H 2 O-Co III -OH 23. The observed anodic features at~1 V demonstrates the oxidation of Co III porphyrin to Co III porphyrin radical cation (+P-Co III -OH) 24. As first oxidation occurred before the onset potential of WOC catalytic current, so +P-Co III -OH is not the reactive oxidant in this system. The second oxidation at 1320 mV generates a reactive high-valent Co IV -O porphyrin radical cation 25. The key step for O-O bond formation is the nucleophilic addition of H 2 O to +P-Co IV -O 25 to form Co-hydroperoxo or peroxo which further oxidized to evolve O 2 as shown in Scheme 5. Likewise, photo-induced generation of Co IV =O as active oxidant for the water oxidation was reported [93] based on a cobalt(II) complex of salophen ligand. Moreover, a high-valent Co IV O complex isoelectronic to Co V O was reported [29] to act as active specie to generate O 2 based on a cobalt(III) complex of N-based ligand bTAML (bTAML = biuret-modified tetraamidomacrocyclic) ligands. The complex [Co(O)(bTAML)] 1− cannot be characterized by spectroscopic techniques due to the non-innocent nature of the ligand except UV-vis spectra. The same specie was generated by the one electron oxidation using cerium ammonium nitrate in the presence of ZnCl 2 . The HR-MS analysis revealed the m/z = 497.026 corresponding to [Co IV (O)(Zn)(bTAML)(H + )]. Further, Nocera et al. reported [94] the dicobalt oxidized site Co(III) 2 Co(IV) 2 during water oxidation using cobalt cubane modified by pyridine ligands that can stabilize tetracobalt core. This pyridine-modified cobalt cubane has molecular nature and termed as molecular cubane. Electrochemical investigation demonstrated two reversible oxidation events at E 0 (1) = 0.3 V and E 0 (2) = 1.25 V corresponding to Co(III) 3 (IV)/Co(III) 4 and Co(III) 2 (IV) 2 /Co(III) 3 (IV). X-ray absorption spectroscopy also confirms the presence of Co(III) 2 (IV) 2 specie. The adjacent terminal Co IV =O species in cubane provide a site for direct O-O bond formation by radical coupling to evolve O 2 . Likewise, the proton-coupled electron transfer generation of (Co IV -O) was also reported [95] using molecular model cubane, [Co 4 O 4 (CO 2 Me 2 ) 2 (bpy) 4 ]. Furthermore, molecular cobalt cubane Co 4 O 4 (OAc) 4 py 4 26 [96] and a series of modified molecular cobalt cubane with electron rich and electron poor groups [97] were reported to understand the nature of high-valent cobalt-oxo species involved in the water oxidation reaction. The electrochemical studies of 26 revealed the presence of only one fully redox couple from pH 4 to pH 10 at E 1/2 = 1.25 V corresponding to Co(III) 4 /Co(III) 3 (IV) redox. The increase of pH to 12 produced a significant anode wave current and bubble formation, consistent with the oxidation of hydroxide to oxygen. No change in the current intensity was observed in the presence of EDTA, ruling out the possibility of heterogeneous water oxidation due to the presence of Co II oxide. The ESI-MS analysis by incorporating 97% enriched Na 18 OH observed the presence of 90% 36 [98][99][100][101]. Corroles are analogous of porphyrin which have one carbon less than porphyrin and can stabilize metals in a higher oxidation state. A high-valent Co V =O specie suggested [102] to act as reactive specie during water oxidation by using series of cobalt

Preparation of Cobalt-Oxo Complexes
The isolated preparation of cobalt-oxo complexes have two major problems (1). Ligands used to stabilize cobalt-oxo complexes are prone to oxidation (2). Electronic repulsion forces between the delectron of cobalt and electron of the oxygen. Chemists are focusing on how to overcome these problems to prepare cobalt-oxo complexes.

Preparation of Cobalt-Oxo Complexes
The isolated preparation of cobalt-oxo complexes have two major problems (1). Ligands used to stabilize cobalt-oxo complexes are prone to oxidation (2). Electronic repulsion forces between the d-electron of cobalt and electron of the oxygen. Chemists are focusing on how to overcome these problems to prepare cobalt-oxo complexes.
Ray et al. reported [103] the first preparation and isolation of terminal cobalt(IV)-oxo complex using the N-based tetradentate tripodal ligand TMG 3 tren (tris[2-(N-tetramethylguanidyl)ethyl]amine). The {Co-O} unit was stabilized by the Lewis acid interaction with Sc +3 ion, generating {Co-O-Sc} +3 unit. The complex 29 was obtained by two electron oxidation of 27-OTf in the presence of Sc(OTf) 3 (Scheme 7). The complex 29 was characterized by electrospray mass spectrum, EPR and X-ray absorption spectroscopy, and was reactive towards oxidation of triphenylphosphine and dihydroanthracene. The same group two years later reported [104] the square pyramidal cobalt(IV)-oxo with enhanced stability based on the tetraamido macrocyclic ligand (TMAL). The electrochemical study of 30 gave a reversible oxidation peak at 1.00 V vs. a saturated colomel electrode. This reversible oxidation peak suggests that Co IV state is thermally and kinetically accessible. The one electron oxidation of 30 in the presence of cerium ammonium nitrate (CAN) afforded a blue-colored complex 31-Ce with a half-life of 20 min. This blue complex can also be obtained by the oxidation of 30 with PhIO in the presence other redox-inactive metals like Sc +3 , Y +3 and Zn +2 (Scheme 8). The complex 31-M was characterized by cold-spray ionization time-of-flight mass spectrometry (CSI-TOF MS), X-band EPR spectrum, and X-ray absorption spectroscopy. All attempts to obtain resonance Raman spectrum have failed. The 31-Sc complex demonstrated high reactivity in the hydrogen abstraction reaction and oxygen atom transfer reactions. The first fully spectroscopically characterized high-valent Cobalt(IV)-oxo complex 33 was generated [105] by the two electron oxidation of a cobalt complex of 13-TMC (2 mM) 32 by PhIO (3 equiv.) following conventional method in the presence of triflic acid (CF 3 SO 3 H, HOTf; 1.2 equiv.) in acetone (Scheme 9). The transient complex had a half-life of 3 h and was characterized by CSI-TOF MS, EPR and X-ray absorption spectroscopy. Resonance Raman spectroscopy considered as authentic technique to confirm the presence of metal-oxo complex [106,107]. The resonance Raman spectrum of 33 showed a band at 770 cm −1 which shifts to 736 cm −1 upon 18 O-labelling of 33. Recently, preparation of Co III ≡O complex was reported [108] by using tris-(imidazol-2-ylidene)borate ligand PhB(tBuIm) 3 − .
This complex was characterized by infrared (IR) and X-ray diffraction (XRD) spectroscopy. The length of Co-O bond determined by XRD was 1.68 Å. DFT calculations revealed two Co-O π* interactions with highest lying d xz and d yz orbitals. These orbitals support the presence of two π-bonds. This complex was thermodynamically unstable with half-life of 8 h.

Summary and Outlook
High-valent cobalt-oxo complexes are implicated as key intermediates in many of the oxidative transformation reactions and the water oxidation process. Identification of cobalt-oxo species in water-splitting reactions have been extensively studied. However, the transient nature of cobalt-oxo complexes limits their characterizations to in situ EPR, XAS and mass spectroscopy. Although different strategies, such as using ligands with different electronic environments or MWCNT supports, have been adopted to stabilize cobalt-oxo complexes, until now only one example of Raman characterization for cobalt (IV)=O complex using 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclotridecane ligand has been available. The isolation and identification of high valent cobalt-oxo species remains a great challenge. The design of a suitable N-based ligand which can stabilize coordinated cobalt atom in high oxidation might be the key step for the preparation of higher valent cobalt-oxo complexes, which will allow the full characterization and "slow motion picture" study of the factors controlling its reactivity.

Conflicts of Interest:
The authors declare no conflict of interest.