Microwave-Assisted Synthesis of Bioactive Six-Membered Heterocycles and Their Fused Analogues

This review describes the formation of six-membered heterocyclic compounds and their fused analogues under microwave activation using modern organic transformations including cyclocondensation, cycloaddition, multicomponents and other modular reactions. The review is divided according to the main heterocycle types in order of increasing complexity, starting with heterocyclic systems containing one, two and three heteroatoms and their fused analogues. Recent microwave applications are reviewed, with special focus on the chemistry of bioactive compounds. Selected examples from the 2006 to 2015 literature are discussed.


Introduction
Microwave (MW) irradiation is a technique widely used in organic synthesis, as demonstrated by more than 20 years of success stories. Indeed, the growing annual number of publications dealing with this topic is reliable to its importance and popularity ( Figure 1). Since the pioneering works of Gedye and Giguere in 1986, more than 6000 articles devoted to MW irradiation have been published [1][2][3][4][5]. The technical accessibility (in terms of costs and simplicity) and the use of very mild conditions to carry out the reactions, associated to the global improvement of the syntheses in terms of conversion rates (yields), shortened reaction times and absence of side-products, contribute today to the huge popularity of the MW irradiation in organic chemistry [6]. In light of this indisputable success, MW has recently come to receive widespread global acceptance in academia and industry.
Heterocycle-containing molecules are extensively studied for their synthesis and their applications not only in medicinal chemistry, but also in optics, electronics and material sciences [7,8]. Therefore, in the last decade, considerable efforts have been performed in designing and carrying out innovative synthetic protocols in heterocyclic chemistry to optimize more eco-sustainable approaches [9].
These processes, also called green chemistry, have been applied not only in the field of medicinal chemistry, but also to natural products and polymer syntheses, material sciences, nanotechnology, essential oil extraction and biochemical processes [10][11][12][13][14]. In addition, the MW-assisted organic syntheses can also lead in short time to large libraries of small-sized heterocyclic compounds featuring high molecular diversity with potential bioactivities [15,16].
MW-assisted syntheses of heterocycles have been extensively reported in the last years, as outlined in Figure 1. Nevertheless, the specific purpose of the present review is to highlight substantive recent applications of MW-irradiation to improve the synthesis of heterocycles formed through cyclocondensation, cycloaddition and other modular reactions. To this end, we selected in this review a panel of new synthetic routes used to prepare highly functionalized heterocyclic compounds with potential bioactivities. We focused this work on the results published in the last decade (2006)(2007)(2008)(2009)(2010)(2011)(2012)(2013)(2014)(2015), which is the most prolific period for this specific topic as illustrated in Figure 1.
In this review, the survey of the 6-membered heterocycles and their fused analogues' syntheses is arranged according to the number of heteroatoms. Three, four and five-membered ring systems have been previously reviewed by our group and are not addressed in this issue [17]; the synthesis of seven-membered ring and macrocyclic systems will be reviewed by us shortly.
Molecules 2016, 21,492 2 of 52 essential oil extraction and biochemical processes [10][11][12][13][14]. In addition, the MW-assisted organic syntheses can also lead in short time to large libraries of small-sized heterocyclic compounds featuring high molecular diversity with potential bioactivities [15,16]. MW-assisted syntheses of heterocycles have been extensively reported in the last years, as outlined in Figure 1. Nevertheless, the specific purpose of the present review is to highlight substantive recent applications of MW-irradiation to improve the synthesis of heterocycles formed through cyclocondensation, cycloaddition and other modular reactions. To this end, we selected in this review a panel of new synthetic routes used to prepare highly functionalized heterocyclic compounds with potential bioactivities. We focused this work on the results published in the last decade (2006)(2007)(2008)(2009)(2010)(2011)(2012)(2013)(2014)(2015), which is the most prolific period for this specific topic as illustrated in Figure 1.
In this review, the survey of the 6-membered heterocycles and their fused analogues' syntheses is arranged according to the number of heteroatoms. Three, four and five-membered ring systems have been previously reviewed by our group and are not addressed in this issue [17]; the synthesis of seven-membered ring and macrocyclic systems will be reviewed by us shortly.
A wide range of practical syntheses of pyridine derivatives using MW-irradiation have been reported in the last decade [30][31][32][33][34]. In a recent work, Hu et al. [30] synthesized a series of novel polyfunctionalized pyrido [2,3-b]indoles. This unusual tricyclic scaffold is found in some natural compounds such as grossularine-1 (1) and -2 (2), mescengricin (3) and a GABA modulator 4 having antianxiolitic properties ( Figure 2). The reported synthesis by Hu et al.  On the other hand, El-Borai et al. [31] described a new synthesis of pyrazolo [3,4-b]pyridine derivatives through a one-pot multi-component reaction. In this synthesis, 5-amino-1-phenyl-3-(pyridin-3-yl)-1H-pyrazole (11) was allowed to react with either 4-anisaldehyde (12) and p-substituted α-keto-nitriles 13 or with pyruvic acid (16) and some aromatic aldehydes 15 in acetic acid (Scheme 2). The reaction was carried out by conventional heating and under MW irradiation. The authors reported that the use of MW lead to shortened reaction times and higher yields compared to those obtained by conventional heating.    On the other hand, El-Borai et al. [31] described a new synthesis of pyrazolo [3,4-b]pyridine derivatives through a one-pot multi-component reaction. In this synthesis, 5-amino-1-phenyl-3-(pyridin-3-yl)-1H-pyrazole (11) was allowed to react with either 4-anisaldehyde (12) and p-substituted α-keto-nitriles 13 or with pyruvic acid (16) and some aromatic aldehydes 15 in acetic acid (Scheme 2). The reaction was carried out by conventional heating and under MW irradiation. The authors reported that the use of MW lead to shortened reaction times and higher yields compared to those obtained by conventional heating. On the other hand, El-Borai et al. [31] described a new synthesis of pyrazolo [3,4-b]pyridine derivatives through a one-pot multi-component reaction. In this synthesis, 5-amino-1-phenyl-3-(pyridin-3-yl)-1H-pyrazole (11) was allowed to react with either 4-anisaldehyde (12) and p-substituted α-keto-nitriles 13 or with pyruvic acid (16) and some aromatic aldehydes 15 in acetic acid (Scheme 2). The reaction was carried out by conventional heating and under MW irradiation. The authors reported that the use of MW lead to shortened reaction times and higher yields compared to those obtained by conventional heating.  2 , N(C 2 H 5 ) 2 R 2 = H, OCH 3 6-Amino-3,5-dicarbonitrile-2-thio-pyridines 21 are usually synthesized under base catalysis. The first example of such a reaction catalyzed by a Lewis acid was recently reported by Sridhar et al. [32]. This synthesis was carried out by means of an efficient one-pot multi-component reaction, which combines aliphatic, aryl, or heteroaryl aldehydes 18 with malononitrile (19) and thiophenol (20) in the presence of ZnCl2 either under MW-irradiation or conventional heating conditions. In both cases, the compounds were obtained in moderate to good yield; nevertheless, MW-irradiation allowed shortened reaction times (Scheme 3 Another new method allowing the preparation of highly functionalized pyridine derivatives was established by Linder et al. [33]. In this synthesis, 6H-1,2-oxazines 22 and various alkynes 23 reacted in the presence of a Lewis acid catalyst and under MW-irradiation leading to polyfunctionnalized pyridines 24 (Scheme 4). This procedure leads to higher yields compared to conventional syntheses. The authors hypothesized that the addition of the Lewis acid (TiCl4 or BF3·OEt2) on the oxazine induced the formation of an 1,2-azapyrylium ion which remains stable even at high temperature. Moreover, the authors postulated that MW-irradiation is mandatory for completing its formation. Next, this azapyrylium ion reacts with substituted alkyne in a [4+2] cycloaddition to give a bridged intermediate. The last step of the reaction is a retro Diels-Alder reaction, leading to the expected pyridines.
On the other hand, El-Borai et al. [31] described a new synthesis of pyrazolo [3,4-b]pyridine derivatives through a one-pot multi-component reaction. In this synthesis, 5-amino-1-phenyl-3-(pyridin-3-yl)-1H-pyrazole (11) was allowed to react with either 4-anisaldehyde (12) and p-substituted α-keto-nitriles 13 or with pyruvic acid (16) and some aromatic aldehydes 15 in acetic acid (Scheme 2). The reaction was carried out by conventional heating and under MW irradiation. The authors reported that the use of MW lead to shortened reaction times and higher yields compared to those obtained by conventional heating.
These newly synthesized compounds were screened for their antibacterial activity against Gram-positive bacteria (Bacillus) and Gram-negative bacteria (Escherichia coli, Enterobacter cloaca and E. serratia), and also for their antifungal activity against Fusarium oxysporum and Penicillium expansum. Most of the compounds showed higher antibacterial potencies against the Gram-negative bacteria rather than the Gram-positive bacteria and fungi.
6-Amino-3,5-dicarbonitrile-2-thio-pyridines 21 are usually synthesized under base catalysis. The first example of such a reaction catalyzed by a Lewis acid was recently reported by Sridhar et al. [32]. This synthesis was carried out by means of an efficient one-pot multi-component reaction, which combines aliphatic, aryl, or heteroaryl aldehydes 18 with malononitrile (19) and thiophenol (20) in the presence of ZnCl 2 either under MW-irradiation or conventional heating conditions. In both cases, the compounds were obtained in moderate to good yield; nevertheless, MW-irradiation allowed shortened reaction times (Scheme 3). This procedure leads to higher yields compared to conventional syntheses. The authors hypothesized that the addition of the Lewis acid (TiCl 4 or BF 3¨O Et 2 ) on the oxazine induced the formation of an 1,2-azapyrylium ion which remains stable even at high temperature. Moreover, the authors postulated that MW-irradiation is mandatory for completing its formation. Next, this azapyrylium ion reacts with substituted alkyne in a [4 + 2] cycloaddition to give a bridged intermediate. The last step of the reaction is a retro Diels-Alder reaction, leading to the expected pyridines.
A novel one-step synthesis of thieno [2,3-b]pyridine derivatives 27 catalyzed by ytterbium(III) triflate under solvent-free conditions was reported by Wieke et al. [34]. Thus, in the presence of a catalytic amount of Yb(OTf) 3 and under MW irradiation with silica gel, several series of 2-amino-3-thiophene-carbonitriles 25 reacted easily with different ketones 26 to afford, in only 5 minutes, the corresponding amino-thieno [2,3-b]pyridines 27 in good to excellent yields. Importantly, the catalyst could be easily recovered and reused several times (Scheme 5). 1,4-Dihydropyridine derivatives have a wide range of biological and pharmaceutical activities and are also involved in hydride transfer from the reduced nicotinamide adenine dinucleotide (NADH and NADPH) coenzymes, and analogues thereof, which mediate hydrogen transfer reactions in biological systems [35][36][37].
Surprisingly, very few examples of 1,4-dihydropyridines syntheses under MW-irradiation have been described. Kuraitheerthakumaran et al. [43] reported a simple and efficient three-component protocol starting from β-ketoester 32, aldehydes 33 and ammonium acetate (34). The reactions were performed under solvent-free conditions using lanthanum oxide as a catalyst. This new method provided the expected products 35 in excellent yields (90%-98%) after short reaction times (40-80 s) in comparison to the classical Hantzsch methods (Scheme 7) [44][45][46]. Ladani et al. [47] synthesized new 1,4-dihydropyridine derivatives by a MW-assisted Hantzsch condensation via three-components reactions involving tetrazolo[1,5-a]quinoline-4-carbaldehydes 36, ethyl/methyl acetoacetate 37 and ammonium acetate (Scheme 8). The resulting series of 1,4-dihydropyridines 38 were screened for their antimicrobial activity. Some of these newly synthesized compounds showed better fungicidal activity, specifically against R. oryzae, than the standard drugs ampicillin and griseofulvin. Conversely, they displayed poor bactericidal activity. Ladani et al. [47] synthesized new 1,4-dihydropyridine derivatives by a MW-assisted Hantzsch condensation via three-components reactions involving tetrazolo[1,5-a]quinoline-4-carbaldehydes 36, ethyl/methyl acetoacetate 37 and ammonium acetate (Scheme 8). The resulting series of 1,4dihydropyridines 38 were screened for their antimicrobial activity. Some of these newly synthesized compounds showed better fungicidal activity, specifically against R. oryzae, than the standard drugs ampicillin and griseofulvin. Conversely, they displayed poor bactericidal activity. Compounds containing a piperidine moiety represent a large class of natural products and their syntheses have become an interesting topic due to their relevance as bioactive components in pharmaceutical science in recent years ( Figure 3) [48][49][50]. An interesting example of piperidine synthesis has been described by Ravindran et al. [51]. This approach proceeded through the condensation of diphenacyl anilines 43 with different arylidene acetophenones 44 in the presence of a catalytic amount of sodium ethoxide. This one-pot tandem sequence involved a Michael addition-aldol reaction ring closure and afforded highly substituted piperidines 45 in good yields (Scheme 9). Compounds containing a piperidine moiety represent a large class of natural products and their syntheses have become an interesting topic due to their relevance as bioactive components in pharmaceutical science in recent years ( Figure 3) [48][49][50]. Ladani et al. [47] synthesized new 1,4-dihydropyridine derivatives by a MW-assisted Hantzsch condensation via three-components reactions involving tetrazolo[1,5-a]quinoline-4-carbaldehydes 36, ethyl/methyl acetoacetate 37 and ammonium acetate (Scheme 8). The resulting series of 1,4dihydropyridines 38 were screened for their antimicrobial activity. Some of these newly synthesized compounds showed better fungicidal activity, specifically against R. oryzae, than the standard drugs ampicillin and griseofulvin. Conversely, they displayed poor bactericidal activity. Compounds containing a piperidine moiety represent a large class of natural products and their syntheses have become an interesting topic due to their relevance as bioactive components in pharmaceutical science in recent years ( Figure 3) [48][49][50]. An interesting example of piperidine synthesis has been described by Ravindran et al. [51]. This approach proceeded through the condensation of diphenacyl anilines 43 with different arylidene acetophenones 44 in the presence of a catalytic amount of sodium ethoxide. This one-pot tandem sequence involved a Michael addition-aldol reaction ring closure and afforded highly substituted piperidines 45 in good yields (Scheme 9). An interesting example of piperidine synthesis has been described by Ravindran et al. [51]. This approach proceeded through the condensation of diphenacyl anilines 43 with different arylidene acetophenones 44 in the presence of a catalytic amount of sodium ethoxide. This one-pot tandem sequence involved a Michael addition-aldol reaction ring closure and afforded highly substituted piperidines 45 in good yields (Scheme 9). An interesting example of piperidine synthesis has been described by Ravindran et al. [51]. This approach proceeded through the condensation of diphenacyl anilines 43 with different arylidene acetophenones 44 in the presence of a catalytic amount of sodium ethoxide. This one-pot tandem sequence involved a Michael addition-aldol reaction ring closure and afforded highly substituted piperidines 45 in good yields (Scheme 9). Scheme 9. Synthesis of pyridines through one-pot procedure. Scheme 9. Synthesis of pyridines through one-pot procedure.

Quinolines
Quinolines and their derivatives are important heterocyclic compounds because of their wide-ranging biological activities [52][53][54] and interesting photochemical properties [55]. For example, chloroquine (46) has been used for its antimalarial activity for more than 60 years; [56][57][58] bedaquiline (47), an inhibitor of the mycobacterial ATP synthase, has been approved to treat multi-drug resistant tuberculosis, [59] and cabozantinib (48), a multitargeted receptor tyrosine kinase inhibitor, showed effective anticancer activity and has been marketed for the treatment of medullary thyroid cancer ( Figure 4) [60]. Quinolines and their derivatives are important heterocyclic compounds because of their wide-ranging biological activities [52][53][54] and interesting photochemical properties [55]. For example, chloroquine (46) has been used for its antimalarial activity for more than 60 years; [56][57][58] bedaquiline (47), an inhibitor of the mycobacterial ATP synthase, has been approved to treat multi-drug resistant tuberculosis, [59] and cabozantinib (48), a multitargeted receptor tyrosine kinase inhibitor, showed effective anticancer activity and has been marketed for the treatment of medullary thyroid cancer ( Figure 4) [60]. Therefore, in the last decade, several new synthetic routes to quinoline derivatives under MW-irradiation have been reported [61][62][63][64][65][66]. Kulkarni et al. [61] described a solid acid-catalyzed synthesis of substituted quinolines via a MW-assisted three-component domino reaction between anilines, aldehydes and terminal aryl alkynes. The reaction was catalyzed by montmorillonite K-10, a strong and environmentally safe solid acid and performed under solvent-free conditions. The synthetic pathway involved the formation of an imine by condensation of para-substituted anilines 49 and aldehydes 50, followed by nucleophilic attack of phenylacetylene 51 on the formed imine, intramolecular cyclization and aromatization. The K-10 catalyst was recovered during five successive reaction cycles, remained very stable, showed no sign of deactivation and provided excellent yields. The combination of solid acid catalysis, multicomponent domino reaction approach and microwave irradiation provided the quinolones 52 in excellent selectivities and short reaction times (Scheme 10).  Therefore, in the last decade, several new synthetic routes to quinoline derivatives under MW-irradiation have been reported [61][62][63][64][65][66]. Kulkarni et al. [61] described a solid acid-catalyzed synthesis of substituted quinolines via a MW-assisted three-component domino reaction between anilines, aldehydes and terminal aryl alkynes. The reaction was catalyzed by montmorillonite K-10, a strong and environmentally safe solid acid and performed under solvent-free conditions. The synthetic pathway involved the formation of an imine by condensation of para-substituted anilines 49 and aldehydes 50, followed by nucleophilic attack of phenylacetylene 51 on the formed imine, intramolecular cyclization and aromatization. The K-10 catalyst was recovered during five successive reaction cycles, remained very stable, showed no sign of deactivation and provided excellent yields. The combination of solid acid catalysis, multicomponent domino reaction approach and microwave irradiation provided the quinolones 52 in excellent selectivities and short reaction times (Scheme 10). environmentally safe solid acid and performed under solvent-free conditions. The synthetic pathway involved the formation of an imine by condensation of para-substituted anilines 49 and aldehydes 50, followed by nucleophilic attack of phenylacetylene 51 on the formed imine, intramolecular cyclization and aromatization. The K-10 catalyst was recovered during five successive reaction cycles, remained very stable, showed no sign of deactivation and provided excellent yields. The combination of solid acid catalysis, multicomponent domino reaction approach and microwave irradiation provided the quinolones 52 in excellent selectivities and short reaction times (Scheme 10). Another green-chemistry related approach was recently reported by Kumar et al. [62] for the synthesis of novel quinolin-4-ylmethoxy-chromen-2/-4-ones 56, 58 under MW conditions. The protocol involves a one-pot reaction of aromatic amines 53 and aldehydes 54, and a propargylated-flavone (55) or -coumarin (57) using YbCl3 (2 mol%) as catalyst. The reactions were carried out at 100 °C, and led to the expected products with excellent yields after a short reaction time (4 min). The authors hypothesized a three step mechanism: domino-imine formation between the aldehyde and the amine, activation of the imine by the catalyst and subsequent addition to the acetylenyl derivative leading to a cyclization, and finally oxidation of the intermediate. According to this model, Yb 3+ as catalyst Another green-chemistry related approach was recently reported by Kumar et al. [62] for the synthesis of novel quinolin-4-ylmethoxy-chromen-2/-4-ones 56, 58 under MW conditions. The protocol involves a one-pot reaction of aromatic amines 53 and aldehydes 54, and a propargylated-flavone (55) or -coumarin (57) using YbCl 3 (2 mol%) as catalyst. The reactions were carried out at 100˝C, and led to the expected products with excellent yields after a short reaction time (4 min). The authors hypothesized a three step mechanism: domino-imine formation between the aldehyde and the amine, activation of the imine by the catalyst and subsequent addition to the acetylenyl derivative leading to a cyclization, and finally oxidation of the intermediate. According to this model, Yb 3+ as catalyst enhances the electrophilicity of the imine, and therefore plays a key role either in imine formation and cyclization steps. Importantly, the reaction occurs in water, which does not deactivate nor decompose the catalyst (Scheme 11). enhances the electrophilicity of the imine, and therefore plays a key role either in imine formation and cyclization steps. Importantly, the reaction occurs in water, which does not deactivate nor decompose the catalyst (Scheme 11).
These highly functionalized quinolone derivatives have been examined for their in vitro antibacterial activity against Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and S. flexneri) bacteria, and also for their antifungal potential against Candida albicans. Their activities were compared to those of marketed drugs, i.e., ampicillin and cefadroxil (antiobiotic) and fluconazole (antifungal). Several compounds exhibited better or equally potent antibacterial potencies, expressed as in vitro minimum inhibitory concentration values (MIC), as the reference drugs against the four bacteria of the panel (MIC values in the 0.4-6 mg/mL range). The structure activity relationship study highlights the relevance of the heterocyclic moiety of the quinoline scaffold. Promising results have been also obtained in anti-fungal assay, since one compound exhibited a MIC value of 0.4 mg/mL, which is ten times better than fluconazole.
These highly functionalized quinolone derivatives have been examined for their in vitro antibacterial activity against Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and S. flexneri) bacteria, and also for their antifungal potential against Candida albicans. Their activities were compared to those of marketed drugs, i.e., ampicillin and cefadroxil (antiobiotic) and fluconazole (antifungal). Several compounds exhibited better or equally potent antibacterial potencies, expressed as in vitro minimum inhibitory concentration values (MIC), as the reference drugs against the four bacteria of the panel (MIC values in the 0.4-6 mg/mL range). The structure activity relationship study highlights the relevance of the heterocyclic moiety of the quinoline scaffold. Promising results have been also obtained in anti-fungal assay, since one compound exhibited a MIC value of 0.4 mg/mL, which is ten times better than fluconazole.
Very recently, Li et al. [63] have developed a new synthesis of tetracyclic indolo[2,3-b]quinolone derivatives 61 via domino heterocyclization of 3-aroylidene-2-oxindoles 59 with enaminones 60 in a sealed vessel under microwave irradiation. The reaction cascades consisted of an initial Michael addition, tautomerism, intramolecular cyclization, and dehydration leading to aromatization (Scheme 12). This methodology showed attractive properties, such as short reaction times, high yields and operational simplicity.
activity against Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and S. flexneri) bacteria, and also for their antifungal potential against Candida albicans. Their activities were compared to those of marketed drugs, i.e., ampicillin and cefadroxil (antiobiotic) and fluconazole (antifungal). Several compounds exhibited better or equally potent antibacterial potencies, expressed as in vitro minimum inhibitory concentration values (MIC), as the reference drugs against the four bacteria of the panel (MIC values in the 0.4-6 mg/mL range). The structure activity relationship study highlights the relevance of the heterocyclic moiety of the quinoline scaffold. Promising results have been also obtained in anti-fungal assay, since one compound exhibited a MIC value of 0.4 mg/mL, which is ten times better than fluconazole.
Very recently, Li et al. [63] have developed a new synthesis of tetracyclic indolo[2,3-b]quinolone derivatives 61 via domino heterocyclization of 3-aroylidene-2-oxindoles 59 with enaminones 60 in a sealed vessel under microwave irradiation. The reaction cascades consisted of an initial Michael addition, tautomerism, intramolecular cyclization, and dehydration leading to aromatization (Scheme 12). This methodology showed attractive properties, such as short reaction times, high yields and operational simplicity. Barluenga et al. [64] have developed the synthesis of tetrahydroquinoline derivatives 65, 66 by tandem palladium catalysis under MW irradiation. This method is based on the cross-coupling of tosylhydrazone derivatives 62, 63 with 1,2-dihalogenated aromatic benzenes 64 under Pd catalysis, followed by an intramolecular C-N bond-forming reaction (Scheme 13). The reaction took between 15 and 120 min, and provided a series of isoquinoline derivatives in low to good yields (30%-90%).
Molecules 2016, 21, 492 9 of 52 followed by an intramolecular C-N bond-forming reaction (Scheme 13). The reaction took between 15 and 120 min, and provided a series of isoquinoline derivatives in low to good yields (30%-90%).
Devi Bala et al. [65] have described a new Hantzsch condensation method for the regioselective synthesis of a library of tetrahydrobenzo[g]quinolines under microwave irradiation (Scheme 14). The products were obtained in excellent yields and short reaction times, starting from 2-hydroxy-1,4naphthaquinone (67), aromatic aldehydes 68, methyl or ethyl acetoacetate 69 and ammonium acetate in ethanol as solvent. All reactions were performed in a sealed vial and irradiated in a focused microwave at 100 °C, or conducted by classical heating in an oil bath for 4 h. The mechanistic study of this reaction points out the total regioselectivity of the intramolecular condensation, which occurs during the last step. This is probably due to the higher electrophilicity of the carbonyl at the non-conjugated 3-position related to these of the carbonyl at the conjugated 1-position (Scheme 15).
This synthetic pathway showed a significant acceleration of the reaction under MW (10 min)
Devi Bala et al. [65] have described a new Hantzsch condensation method for the regioselective synthesis of a library of tetrahydrobenzo[g]quinolines under microwave irradiation (Scheme 14). The products were obtained in excellent yields and short reaction times, starting from 2-hydroxy-1,4-naphthaquinone (67), aromatic aldehydes 68, methyl or ethyl acetoacetate 69 and ammonium acetate in ethanol as solvent. All reactions were performed in a sealed vial and irradiated in a focused microwave at 100˝C, or conducted by classical heating in an oil bath for 4 h. The mechanistic study of this reaction points out the total regioselectivity of the intramolecular condensation, which occurs during the last step. This is probably due to the higher electrophilicity of the carbonyl at the non-conjugated 3-position related to these of the carbonyl at the conjugated 1-position (Scheme 15).
This synthetic pathway showed a significant acceleration of the reaction under MW (10 min) compared to the conventional heating (4 h), and leads to the expected tetrahydrobenzo[g]quinolones 70 in high yields. Scheme 13. Tetrehydroquinolines synthesis through palladium catalyzed cross-coupling/intramolecular C-N bond forming tandem reaction. Devi Bala et al. [65] have described a new Hantzsch condensation method for the regioselective synthesis of a library of tetrahydrobenzo[g]quinolines under microwave irradiation (Scheme 14). The products were obtained in excellent yields and short reaction times, starting from 2-hydroxy-1,4naphthaquinone (67), aromatic aldehydes 68, methyl or ethyl acetoacetate 69 and ammonium acetate in ethanol as solvent. All reactions were performed in a sealed vial and irradiated in a focused microwave at 100 °C, or conducted by classical heating in an oil bath for 4 h. The mechanistic study of this reaction points out the total regioselectivity of the intramolecular condensation, which occurs during the last step. This is probably due to the higher electrophilicity of the carbonyl at the non-conjugated 3-position related to these of the carbonyl at the conjugated 1-position (Scheme 15).
This synthetic pathway showed a significant acceleration of the reaction under MW (10 min) compared to the conventional heating (4 h), and leads to the expected tetrahydrobenzo[g]quinolones 70 in high yields. The use of nickel nanoparticles as a heterogeneous catalyst for the synthesis of polyhydroquinoline derivatives 74 via solvent-free Hantzsch condensation was described by Sapkal et al. [66]. In this work, a one-pot four component reaction involving aromatic aldehydes 71, dimedone (72), ethyl acetoacetate (73) and ammonium acetate led to polyhydroquinoline derivatives in excellent yields after short reaction times (Scheme 16). All reactions were performed using nanosized nickel particles and microwave activation. Moreover, the catalyst was recovered and reused for the same reaction during four consecutive runs without any apparent loss of activity. Scheme 16. Synthesis of polyhydro-quinolines through a solvent-free Hantzsch procedure.
The use of nickel nanoparticles as a heterogeneous catalyst for the synthesis of polyhydroquinoline derivatives 74 via solvent-free Hantzsch condensation was described by Sapkal et al. [66]. In this work, a one-pot four component reaction involving aromatic aldehydes 71, dimedone (72), ethyl acetoacetate (73) and ammonium acetate led to polyhydroquinoline derivatives in excellent yields after short reaction times (Scheme 16). All reactions were performed using nanosized nickel particles and microwave activation. Moreover, the catalyst was recovered and reused for the same reaction during four consecutive runs without any apparent loss of activity.
The use of nickel nanoparticles as a heterogeneous catalyst for the synthesis of polyhydroquinoline derivatives 74 via solvent-free Hantzsch condensation was described by Sapkal et al. [66]. In this work, a one-pot four component reaction involving aromatic aldehydes 71, dimedone (72), ethyl acetoacetate (73) and ammonium acetate led to polyhydroquinoline derivatives in excellent yields after short reaction times (Scheme 16). All reactions were performed using nanosized nickel particles and microwave activation. Moreover, the catalyst was recovered and reused for the same reaction during four consecutive runs without any apparent loss of activity. Scheme 16. Synthesis of polyhydro-quinolines through a solvent-free Hantzsch procedure.

Pyrans
A huge variety of bioactive compounds include a pyran ring, especially sugars, and several pyrene derivatives. They feature a broad-spectrum bioactivities such as anti-inflammatory, sedative, anti-tubercular, anti-protozoal, anti-bacterial and anti-fungal properties [67][68][69][70]. New strategies for the synthesis of pyrene derivatives have been developed in recent years [71,72]. Peng and Song [72] have used the ionic liquid [2-aemim][PF 6 ] (1-methyl-3-(2-aminoethyl)imidazolium hexafluorophosphate) for the one-pot synthesis of 4H-pyran derivatives under focused MW-irradiation. A mixture of aromatic aldehydes 75 with malononitrile (76) and ethyl acetoacetate (77) was reacted at 100˝C using a combination of [2-aemim][PF 6 ] (78) and water as solvent, and the microwave-mediated cyclization occurred rapidly (1-4 min). The expected 4H-pyran derivatives 79 have been isolated in excellent yields (Scheme 17). Moreover, the aqueous amino-functionalized ionic liquid has been recycled, and the same batch of solvent has been used more than seven times. Scheme 17. One-pot synthesis of 4H-pyrans using a mixture of water and ionic liquid as solvent.
A very interesting chemioselective synthesis under MW-activation of highly functionalized indolylpyran derivatives has been reported by Kamalraja et al. [72]. These synthetic pyrans are described as analogues of some important bioactive compounds such as nortopsentins A-C (80); [73,74] hamacanthin B (81); [75,76]   , whose N-cyclization, according to path b, could lead to dihydropyridine. The authors reported that they never observed the formation of this latter adduct, underlying the exceptional regio-and Scheme 17. One-pot synthesis of 4H-pyrans using a mixture of water and ionic liquid as solvent.
A very interesting chemioselective synthesis under MW-activation of highly functionalized indolylpyran derivatives has been reported by Kamalraja et al. [72]. These synthetic pyrans are described as analogues of some important bioactive compounds such as nortopsentins A-C (80); [73,74] hamacanthin B (81); [75,76]    , whose N-cyclization, according to path b, could lead to dihydropyridine. The authors reported that they never observed the formation of this latter adduct, underlying the exceptional regio-and chemoselectivities of their original synthetic route. The procedure consists of a three-component solvent-free coupling of substituted 3-cyanoacetyl indoles 83, various aromatic aldehydes 84, and (E)-N-methyl-1-(methylthio)-2-nitroethenamine (85), in the presence of InCl3 as a catalyst. The syntheses were completed within 3-7 min and the pure indolylpyrans 86 were isolated in high yields (Scheme 18). According to the authors' hypothesis, this reaction is divided in three steps (Scheme 19). Firstly, the 3-cyanoacetylindole is tautomerized, and condensed with the aromatic aldehyde through a Knoevenagel condensation. The resulting intermediate, a Michael acceptor, which undergoes the addition of (E)-N-methyl-1-(methylthio)-2-nitroethamine, affording the open-chain intermediate I. Lastly, this intermediate is cyclized through a O-addition according to path a. However, intermediate I is also in equilibrium with an alternative rotameric form (I'), whose N-cyclization, according to path b, could lead to dihydropyridine. The authors reported that they never observed the formation of this latter adduct, underlying the exceptional regio-and chemoselectivities of their original synthetic route.

Benzopyrones: Coumarins and Chromones
Benzopyrones are an important class of oxygenated heterocycles, widely distributed in plants, including edible vegetables and fruits [79] and many of them have broad and interesting ranges of biological activities [80][81][82][83]. The two more important benzopyrone derivatives are the chromones and coumarins.
In a similar approach, Wang et al. [118] have reported a new one-pot two-step tandem synthesis of highly functionalized benzo[a]pyrano[2,3-c]phenazine derivatives 109 under MW-irradiation. The authors used this method for the combinatorial synthesis of a benzo[a]-pyrano[2,3-c]phenazine libraries, which are analogues of biologically active compounds [119][120][121]. This reaction was achieved by the simple condensation of 2-hydroxynaphthalene-1,4-dione (104), diamines 105, aldehydes 107 and malonitrile (108). Expected compounds are obtained in short reaction times and in good to excellent yields (Scheme 22). Patil et al. [122] have described a fast and efficient method to synthesize substituted chromenes 113 using MW-activation. The reaction was achieved in a single step by the cyclocondensation of 3-dimethylaminophenol (110), substituted naphthaldehydes 111 and malononitrile (112) with few drops of TEA and MW-irradiated at 150˝C for 5 min under pressure. In a preliminar assay, several chromenes showed high anti-proliferative activities (IC 50 in the 7-640 nM range) against several human cancer cell lines (including melanoma, prostate and glioma). Moreover, these molecules do not exert cytotoxicity against normal astrocytes (Scheme 23). chromenes showed high anti-proliferative activities (IC50 in the 7-640 nM range) against several human cancer cell lines (including melanoma, prostate and glioma). Moreover, these molecules do not exert cytotoxicity against normal astrocytes (Scheme 23).
Scheme 23. One-step procedure leading to chromenes.
To synthesize a diverse set of 2-alkyl-substituted 4-chromanones 116, Fridén-Saxin et al. [123] have developed an efficient method, which consisted on a base-promoted condensation of 2-hydroxyacetophenones 114 and various aldehydes 115. These reactions were performed using diisopropylamine in ethanol at 170 °C and afforded the required products in moderate to high yields within one hour (Scheme 24). To synthesize a diverse set of 2-alkyl-substituted 4-chromanones 116, Fridén-Saxin et al. [123] have developed an efficient method, which consisted on a base-promoted condensation of 2-hydroxyacetophenones 114 and various aldehydes 115. These reactions were performed using diisopropylamine in ethanol at 170˝C and afforded the required products in moderate to high yields within one hour (Scheme 24). Scheme 23. One-step procedure leading to chromenes.
To synthesize a diverse set of 2-alkyl-substituted 4-chromanones 116, Fridén-Saxin et al. [123] have developed an efficient method, which consisted on a base-promoted condensation of 2-hydroxyacetophenones 114 and various aldehydes 115. These reactions were performed using diisopropylamine in ethanol at 170 °C and afforded the required products in moderate to high yields within one hour (Scheme 24). Scheme 24. Base-promoted synthesis of 2-alkyl-substituted 4-chromanones.
The synthesis of thiochromone derivatives has been studied by Wen et al. [125], who reported two new strategies to synthesize series of unusual fused tricyclic thiochromeno [ These substituted chromones have been evaluated as novel inhibitors of the NAD-dependent deacetylase sirtuin-2 (SIRT2), which deregulation is involved in age-related diseases (e.g., neurodegenerative disorders). In this study, 6,8-dibromo-2-pentyl-chroman-4-one has been highlighted as the best SIRT2 inhibitor, exhibiting an IC 50 of 1.5 µM [124].
The synthesis of thiochromone derivatives has been studied by Wen et al. [125], who reported two new strategies to synthesize series of unusual fused tricyclic thiochromeno [  The domino Knoevenagel-hetero-Diels-Alder process is a very efficient tool for one-pot syntheses of polyheterocyclic compounds such as dihydropyrans. In this context, Jha et al. [126] reported an Scheme 26. Mechanistic study of the thiochromones synthesis reported by Wen et al. [125].
The domino Knoevenagel-hetero-Diels-Alder process is a very efficient tool for one-pot syntheses of polyheterocyclic compounds such as dihydropyrans. In this context, Jha et al. [126] reported an efficient two-step synthesis of indole-annulated dihydropyrano [3,4- In this latter step, the unreactive terminal alkyne is activated by copper through the formation of a π complex. Importantly, a conventional heating failed to afford the cyclized product, even after 72 h of heating in acetonitrile. However, during the hetero-Diels-Alder reaction, the authors observed the formation of a mixture of fully non-polar side-products, which characterizations were impossible. Importantly, other catalysts, such as mesoporous zirconium phosphate [127], nanocrystalline sulfated-zirconia [128] and trifluoroacetic acid, have also been used in this type of reaction and In this latter step, the unreactive terminal alkyne is activated by copper through the formation of a π complex. Importantly, a conventional heating failed to afford the cyclized product, even after 72 h of heating in acetonitrile. However, during the hetero-Diels-Alder reaction, the authors observed the formation of a mixture of fully non-polar side-products, which characterizations were impossible. Importantly, other catalysts, such as mesoporous zirconium phosphate [127], nanocrystalline sulfated-zirconia [128] and trifluoroacetic acid, have also been used in this type of reaction and showed also high catalytic activity [129].
Hellal et al. [130] have reported an efficient approach for the synthesis of novel series of isocoumarins under strong acidic conditions using TFA as solvent. The process consisted of a Michael-type (6-endo-dig) cyclization of various heterocyclic esters by employing a combination of Brønsted and Lewis acid catalysts. O-alkynylaryl esters 128, 131, containing nitrogen atoms, were first obtained by means of a Sonogashira coupling reaction and were next cyclized in trifluoroacetic acid (a Brønsted acid) as solvent in the presence of a catalytic amount of Cu(OTf) 2 (a Lewis acid) under MW-irradiation, leading to a variety of heterocyclic lactones 129, 130, 132 in excellent yields. For example, analogues of nicotinate bearing electron-donating groups on the phenyl moiety, led to the corresponding lactones in excellent yields (94%-98%), and the tetrahydropyridine derivative provided the expected product in 89% yield (Scheme 28). Scheme 27. One-pot domino Knoevenagel-hetero-Diels-Alder reactions of dihydropyrano [3,4-c]chromenes.
In this latter step, the unreactive terminal alkyne is activated by copper through the formation of a π complex. Importantly, a conventional heating failed to afford the cyclized product, even after 72 h of heating in acetonitrile. However, during the hetero-Diels-Alder reaction, the authors observed the formation of a mixture of fully non-polar side-products, which characterizations were impossible. Importantly, other catalysts, such as mesoporous zirconium phosphate [127], nanocrystalline sulfated-zirconia [128] and trifluoroacetic acid, have also been used in this type of reaction and showed also high catalytic activity [129].
Hellal et al. [130] have reported an efficient approach for the synthesis of novel series of isocoumarins under strong acidic conditions using TFA as solvent. The process consisted of a Michael-type (6-endo-dig) cyclization of various heterocyclic esters by employing a combination of Brønsted and Lewis acid catalysts. O-alkynylaryl esters 128, 131, containing nitrogen atoms, were first obtained by means of a Sonogashira coupling reaction and were next cyclized in trifluoroacetic acid (a Brønsted acid) as solvent in the presence of a catalytic amount of Cu(OTf)2 (a Lewis acid) under MW-irradiation, leading to a variety of heterocyclic lactones 129, 130, 132 in excellent yields. For example, analogues of nicotinate bearing electron-donating groups on the phenyl moiety, led to the corresponding lactones in excellent yields (94%-98%), and the tetrahydropyridine derivative provided the expected product in 89% yield (Scheme 28).

Pyrimidines, Quinazolines
Pyrimidine is a six-membered ring containing two nitrogen atoms at positions 1 and 3 of the heterocycle. Pyrimidine derivatives usually exhibit a huge variety of biological activities, and could be used in therapy as anti-protozoan agents (e.g., 147 exhibits in vitro an MIC value of 0.25 µg/mL against Plasmodium falciparum [150]), anti-cancer agents (e.g., 148 is a selective adenosine A1 receptor

Pyrimidines, Quinazolines
Pyrimidine is a six-membered ring containing two nitrogen atoms at positions 1 and 3 of the heterocycle. Pyrimidine derivatives usually exhibit a huge variety of biological activities, and could be used in therapy as anti-protozoan agents (e.g., 147 exhibits in vitro an MIC value of 0.25 µg/mL against Plasmodium falciparum [150]), anti-cancer agents (e.g., 148 is a selective adenosine A1 receptor antagonist [151] and 149 is a phosphotidylinositol C kinase inhibitor) [152], or as antibacterial agents (e.g., 150 shows antitubercular activity against Mycobacterium tuberculosis at the concentration of 12.5 µg/mL) (Figure 10) [153]. Scheme 31. Solvent-free synthesis of 3,4,6-triarylpyridazines using KOH-alumina as catalyst.

Pyrimidines, Quinazolines
Pyrimidine is a six-membered ring containing two nitrogen atoms at positions 1 and 3 of the heterocycle. Pyrimidine derivatives usually exhibit a huge variety of biological activities, and could be used in therapy as anti-protozoan agents (e.g., 147 exhibits in vitro an MIC value of 0.25 µg/mL against Plasmodium falciparum [150]), anti-cancer agents (e.g., 148 is a selective adenosine A1 receptor antagonist [151] and 149 is a phosphotidylinositol C kinase inhibitor) [152], or as antibacterial agents (e.g., 150 shows antitubercular activity against Mycobacterium tuberculosis at the concentration of 12.5 µg/mL) ( Figure 10) [153]. Novel synthetic strategies using MW-assisted solution-phase synthesis [154,155] and/or MWassisted solvent-free synthesis [152][153][154][155] have been extensively used in the last decade for the synthesis of such derivatives. In this context, Jiang et al. [156] have described a new synthetic route for the preparation of highly functionalized thiopyrano-, pyrano[4,3-d]pyrimidine derivatives incorporating a benzylic core at position 8 of a fused pyran (or thiopyran) nucleus regiospecifically. This synthesis was achieved by using readily available aromatic aldehydes 151, tetrahydropyran-4-one (or tetrahydrothiopyran-4-one, 152), and aryl amidines 153 under MW irradiation through a one-pot four-component reaction (Scheme 32). The expected thiopyran-and pyrano[4,3-d]pyrimidines 154 have been obtained in good to excellent yields and short reaction times. Novel synthetic strategies using MW-assisted solution-phase synthesis [154,155] and/or MW-assisted solvent-free synthesis [152][153][154][155] have been extensively used in the last decade for the synthesis of such derivatives. In this context, Jiang et al. Several therapeutic agents contain thiazolo[3,2-c]pyrimidine motives, as shown in Figure 11. They possess a range of biological activities including antituberculotic, anti-tumour, bronchodilators, antidepressants, analgesic, anti-human immunodeficiency virus (HIV)-1, anti-inflammatory, anti-microbial and anti-diuretic effects. Several therapeutic agents contain thiazolo [3,2-c]pyrimidine motives, as shown in Figure 11. They possess a range of biological activities including antituberculotic, anti-tumour, bronchodilators, antidepressants, analgesic, anti-human immunodeficiency virus (HIV)-1, anti-inflammatory, anti-microbial and anti-diuretic effects. This prompted Yildirim et al. [157] to develop a green procedure leading to new series of these derivatives through Mannich reactions under MW-irradiation. This method involved a multicomponent cyclization of 2-(nitromethylene)thiazolidine (160), various aliphatic or aromatic amines 161 and formaldehyde (162) in water (Scheme 33). The use of MW activation improved the product yields and significantly shortened the reaction times related to a conventional heating. This green cyclization protocol required neither organic solvent for the reaction or purification of final compounds [158][159][160]. An elegant protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones 167 under MW-irradiation has been highlighted by Varma et al. [161]. This involves the condensation of an acetoacetate 164, substituted benzaldehydes 165 and urea or thiourea 166, using polystyrenesulfonic acid (PSSA). The reaction occurs efficiently in water without addition of organic solvent (Scheme 34). The use of polymer supported, low toxic and inexpensive PSSA as a catalyst has rendered this method eco-friendly, with a very simple isolation procedure by filtration of the precipitated products. This prompted Yildirim et al. [157] to develop a green procedure leading to new series of these derivatives through Mannich reactions under MW-irradiation. This method involved a multicomponent cyclization of 2-(nitromethylene)thiazolidine (160), various aliphatic or aromatic amines 161 and formaldehyde (162) in water (Scheme 33). The use of MW activation improved the product yields and significantly shortened the reaction times related to a conventional heating. This green cyclization protocol required neither organic solvent for the reaction or purification of final compounds [158][159][160]. Several therapeutic agents contain thiazolo [3,2-c]pyrimidine motives, as shown in Figure 11. They possess a range of biological activities including antituberculotic, anti-tumour, bronchodilators, antidepressants, analgesic, anti-human immunodeficiency virus (HIV)-1, anti-inflammatory, anti-microbial and anti-diuretic effects. This prompted Yildirim et al. [157] to develop a green procedure leading to new series of these derivatives through Mannich reactions under MW-irradiation. This method involved a multicomponent cyclization of 2-(nitromethylene)thiazolidine (160), various aliphatic or aromatic amines 161 and formaldehyde (162) in water (Scheme 33). The use of MW activation improved the product yields and significantly shortened the reaction times related to a conventional heating. This green cyclization protocol required neither organic solvent for the reaction or purification of final compounds [158][159][160]. An elegant protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones 167 under MW-irradiation has been highlighted by Varma et al. [161]. This involves the condensation of an acetoacetate 164, substituted benzaldehydes 165 and urea or thiourea 166, using polystyrenesulfonic acid (PSSA). The reaction occurs efficiently in water without addition of organic solvent (Scheme 34). The use of polymer supported, low toxic and inexpensive PSSA as a catalyst has rendered this method eco-friendly, with a very simple isolation procedure by filtration of the precipitated products. An elegant protocol for the synthesis of substituted 3,4-dihydropyrimidin-2(1H)-ones 167 under MW-irradiation has been highlighted by Varma et al. [161]. This involves the condensation of an acetoacetate 164, substituted benzaldehydes 165 and urea or thiourea 166, using polystyrenesulfonic acid (PSSA). The reaction occurs efficiently in water without addition of organic solvent (Scheme 34). The use of polymer supported, low toxic and inexpensive PSSA as a catalyst has rendered this method eco-friendly, with a very simple isolation procedure by filtration of the precipitated products. Hosamani et al. [162] recently compared MW-assisted and conventional syntheses of a new series of fluorinated coumarin-pyrimidine hybrids. The reactions proceeded through the cyclic-condensation of substituted chalconated coumarins 168 with 2-(4-fluorophenyl) acetamidine hydrochloride (169) in DMF, leading to the 3-(2-(4-fluorobenzyl)-4-(substituted phenyl) pyrimidin-6-yl)-2H-chromen-2-ones 170. Improved yields and shortened reaction times have been observed when using MW-irradiation compared to conventional heating (Scheme 35). These newly-synthesized compounds were evaluated in vitro for their cytotoxicity against human lung carcinoma cell line A-549 and against the aggressive human breast adenocarcinoma cell line MDA-MB-231, and compared to these of cisplatin, a reference compound used clinically in cancer treatment. In this assay, several molecules exhibited significant cytotoxicity against these two cancer cell lines as underlined by their IC 50 values, which are below 10 µM. Moreover, the most active compounds exhibited a cytotoxicity against A-549 cell line close to these of cisplatin, IC 50 = 1.89 µM and are more potent than this reference drug against the MDA-MB-231 cell line. Scheme 34. Eco-friendly synthesis of 3,4-dihydropyrimidin-2(1H)-ones using polystyrenesulfonic acid in aqueous media.
Hosamani et al. [162] recently compared MW-assisted and conventional syntheses of a new series of fluorinated coumarin-pyrimidine hybrids. The reactions proceeded through the cyclic-condensation of substituted chalconated coumarins 168 with 2-(4-fluorophenyl) acetamidine hydrochloride (169) in DMF, leading to the 3-(2-(4-fluorobenzyl)-4-(substituted phenyl) pyrimidin-6-yl)-2H-chromen-2-ones 170. Improved yields and shortened reaction times have been observed when using MW-irradiation compared to conventional heating (Scheme 35). These newly-synthesized compounds were evaluated in vitro for their cytotoxicity against human lung carcinoma cell line A-549 and against the aggressive human breast adenocarcinoma cell line MDA-MB-231, and compared to these of cisplatin, a reference compound used clinically in cancer treatment. In this assay, several molecules exhibited significant cytotoxicity against these two cancer cell lines as underlined by their IC50 values, which are below 10 µM. Moreover, the most active compounds exhibited a cytotoxicity against A-549 cell line close to these of cisplatin, IC50 = 1.89 µM and are more potent than this reference drug against the MDA-MB-231 cell line. MW-assisted solvent-free synthesis has been widely employed for the preparation of pyrimidine derivatives [163][164][165][166][167]. Thus, Burgula et al. [166] have reported a green procedure for the single-step preparation of series of uracil and cytosine nucleobases 174 and 175. Uracil analogues were synthesized by treatment of the respective β-ketoesters or β-aldehydoester 171 with urea, whereas the cytosine derivatives were obtained from benzoylacetonitriles 172 or N,N-diethylamide precursors (Scheme 36). For these syntheses, using BF3·Et2O as Lewis acid significantly enhanced the reaction yields as well as the conversion rates. MW-assisted solvent-free synthesis has been widely employed for the preparation of pyrimidine derivatives [163][164][165][166][167]. Thus, Burgula et al. [166] have reported a green procedure for the single-step preparation of series of uracil and cytosine nucleobases 174 and 175. Uracil analogues were synthesized by treatment of the respective β-ketoesters or β-aldehydoester 171 with urea, whereas the cytosine derivatives were obtained from benzoylacetonitriles 172 or N,N-diethylamide precursors (Scheme 36). For these syntheses, using BF 3¨E t 2 O as Lewis acid significantly enhanced the reaction yields as well as the conversion rates. MW-assisted solvent-free conditions have been also used for a Biginelli multicomponent reaction as illustrated by the synthesis of a new series of 5-unsubstituted-3,4-dihydropyrimidin-2(1H)-ones 179 [167]. The procedure involved a three-component, one-pot condensation of an aromatic aldehyde 176, acetophenone (177) and urea (178), using ZnI2 as catalyst (Scheme 37). This procedure not only provides improved yields related to the conventional Biginelli conditions, but also expands the scope MW-assisted solvent-free conditions have been also used for a Biginelli multicomponent reaction as illustrated by the synthesis of a new series of 5-unsubstituted-3,4-dihydropyrimidin-2(1H)-ones 179 [167]. The procedure involved a three-component, one-pot condensation of an aromatic aldehyde 176, acetophenone (177) and urea (178), using ZnI 2 as catalyst (Scheme 37). This procedure not only provides improved yields related to the conventional Biginelli conditions, but also expands the scope of this process to a larger variety of substrates. Scheme 36. Green synthesis of uracil and cytosine analogues.
MW-assisted solvent-free conditions have been also used for a Biginelli multicomponent reaction as illustrated by the synthesis of a new series of 5-unsubstituted-3,4-dihydropyrimidin-2(1H)-ones 179 [167]. The procedure involved a three-component, one-pot condensation of an aromatic aldehyde 176, acetophenone (177) and urea (178), using ZnI2 as catalyst (Scheme 37). This procedure not only provides improved yields related to the conventional Biginelli conditions, but also expands the scope of this process to a larger variety of substrates. Scheme 37. Solvent-free Biginelli multicomponent reaction leading to dihydropyrimidinones.

Scheme 36. Green synthesis of uracil and cytosine analogues.
MW-assisted solvent-free conditions have been also used for a Biginelli multicomponent reaction as illustrated by the synthesis of a new series of 5-unsubstituted-3,4-dihydropyrimidin-2(1H)-ones 179 [167]. The procedure involved a three-component, one-pot condensation of an aromatic aldehyde 176, acetophenone (177) and urea (178), using ZnI2 as catalyst (Scheme 37). This procedure not only provides improved yields related to the conventional Biginelli conditions, but also expands the scope of this process to a larger variety of substrates. Scheme 37. Solvent-free Biginelli multicomponent reaction leading to dihydropyrimidinones.
The pyridopyrimidine motive is found in a large variety of bioactive substances including several marketed drugs. For example, this system is present in AZD8055 (180), a selective ATP-competitive PI3KAkt-mTOR signaling pathway inhibitor [168], piritrexim (181), a lipid-soluble inhibitor of dihydrofolate reductase (DHFR) that displays high potency for the treatment of metastatic urothelial cancer [169], and pyrido[2,3-d]pyrimidine 182 that is a hepatitis C virus inhibitor [170] (Figure 12). Other pyridopyrimidine derivatives have also been reported for their potential use as anticardiovascular [171], anti-inflammatory [172,173], antibacterial [174,175], and anti-Parkinson agents [176]. In this context, novel series of pyridopyrimidines were synthesized by Basiri et al. [177] through a one pot four-component MW-assisted reaction. This procedure, under solvent-free condition, involved  (183), aromatic aldehydes 184 and urea or thiourea 185, in the presence of catalytic amount of solid sodium ethoxide (Scheme 38). Interestingly, the reactions were completed in 30 seconds only, affording the expected pyridopyrimidines 186 in excellent yields and with a high degree of purity. This reaction proceeds through a domino sequence involving Michael addition, condensation and tautomerization, as outlined in Scheme 39. The newly synthesized pyridopyrimidine derivatives were evaluated in vitro for their potencies as inhibitors of the acetyl-cholinesterase (AChE) and the butyrylcholinesterase (BChE). Among them, two compounds are 2.5 times (IC50 = 0.8 µM) and 1.5 times (IC50 = 1.37 µM) more potent in inhibiting AChE than galanthamine, which is the reference inhibitor for these enzymes. It is noteworthy that pyrimidinone derivatives are better AChE inhibitors than pyrimidinthiones. In addition, these newly synthesized pyridopyrimidines derivatives exhibited IC50 values ranging from 1.18 to 18.90 µM in BChE inhibition, and therefore displayed better activities than the reference drug. The structure-activity relationship study underlines that the unsubstituted and ortho-substituted derivatives are more potent BChE inhibitors than their meta-, para-, and disubstituted analogues.

4-piperidone hydrochloride monohydrate
Quinazoline derivatives are commonly used in medicinal chemistry as anti-malarial and anti-cancer agents [178][179][180][181][182][183]. Doxazosin mesylate (187, Cardura ® ), a drug used in the treatment of hypertension [184], gefitinib (188, Iressa ® ) and erlotinib (189, Tarceva ® ) are epidermal growth factor receptor inhibitors approved for the treatment of lung cancer and are relevant examples of marketed drugs encompassing such heterocyclic motive [185,186] (Figure 13). The newly synthesized pyridopyrimidine derivatives were evaluated in vitro for their potencies as inhibitors of the acetyl-cholinesterase (AChE) and the butyrylcholinesterase (BChE). Among them, two compounds are 2.5 times (IC50 = 0.8 µM) and 1.5 times (IC50 = 1.37 µM) more potent in inhibiting AChE than galanthamine, which is the reference inhibitor for these enzymes. It is noteworthy that pyrimidinone derivatives are better AChE inhibitors than pyrimidinthiones. In addition, these newly synthesized pyridopyrimidines derivatives exhibited IC50 values ranging from 1.18 to 18.90 µM in BChE inhibition, and therefore displayed better activities than the reference drug. The structure-activity relationship study underlines that the unsubstituted and ortho-substituted derivatives are more potent BChE inhibitors than their meta-, para-, and disubstituted analogues.
Quinazoline derivatives are commonly used in medicinal chemistry as anti-malarial and anti-cancer agents [178][179][180][181][182][183]. Doxazosin mesylate (187, Cardura ® ), a drug used in the treatment of hypertension [184], gefitinib (188, Iressa ® ) and erlotinib (189, Tarceva ® ) are epidermal growth factor receptor inhibitors approved for the treatment of lung cancer and are relevant examples of marketed drugs encompassing such heterocyclic motive [185,186] (Figure 13). The newly synthesized pyridopyrimidine derivatives were evaluated in vitro for their potencies as inhibitors of the acetyl-cholinesterase (AChE) and the butyrylcholinesterase (BChE). Among them, two compounds are 2.5 times (IC 50 = 0.8 µM) and 1.5 times (IC 50 = 1.37 µM) more potent in inhibiting AChE than galanthamine, which is the reference inhibitor for these enzymes. It is noteworthy that pyrimidinone derivatives are better AChE inhibitors than pyrimidinthiones. In addition, these newly synthesized pyridopyrimidines derivatives exhibited IC 50 values ranging from 1.18 to 18.90 µM in BChE inhibition, and therefore displayed better activities than the reference drug. The structure-activity relationship study underlines that the unsubstituted and ortho-substituted derivatives are more potent BChE inhibitors than their meta-, para-, and disubstituted analogues.
Quinazoline derivatives are commonly used in medicinal chemistry as anti-malarial and anti-cancer agents [178][179][180][181][182][183]. Doxazosin mesylate (187, Cardura ® ), a drug used in the treatment of hypertension [184], gefitinib (188, Iressa ® ) and erlotinib (189, Tarceva ® ) are epidermal growth factor receptor inhibitors approved for the treatment of lung cancer and are relevant examples of marketed drugs encompassing such heterocyclic motive [185,186] (Figure 13). The newly synthesized pyridopyrimidine derivatives were evaluated in vitro for their potencies as inhibitors of the acetyl-cholinesterase (AChE) and the butyrylcholinesterase (BChE). Among them, two compounds are 2.5 times (IC50 = 0.8 µM) and 1.5 times (IC50 = 1.37 µM) more potent in inhibiting AChE than galanthamine, which is the reference inhibitor for these enzymes. It is noteworthy that pyrimidinone derivatives are better AChE inhibitors than pyrimidinthiones. In addition, these newly synthesized pyridopyrimidines derivatives exhibited IC50 values ranging from 1.18 to 18.90 µM in BChE inhibition, and therefore displayed better activities than the reference drug. The structure-activity relationship study underlines that the unsubstituted and ortho-substituted derivatives are more potent BChE inhibitors than their meta-, para-, and disubstituted analogues.
Quinazoline derivatives are commonly used in medicinal chemistry as anti-malarial and anti-cancer agents [178][179][180][181][182][183]. Doxazosin mesylate (187, Cardura ® ), a drug used in the treatment of hypertension [184], gefitinib (188, Iressa ® ) and erlotinib (189, Tarceva ® ) are epidermal growth factor receptor inhibitors approved for the treatment of lung cancer and are relevant examples of marketed drugs encompassing such heterocyclic motive [185,186] (Figure 13).  In the last decade, numerous syntheses of highly functionalized series of quinazoline derivatives have been described in the literature [187][188][189][190][191][192][193][194][195][196][197][198][199]. Kabri et al. [187] reported several studies devoted to the synthesis of 2-substituted quinazolines (Scheme 40). The key intermediates for this synthesis were easily obtained through green procedures. On the one hand, 2-aminobenzamide (190) reacted under MW-activation with chloroacetylchloride (191) to afford N-(2-aminophenyl)-2-chloroacetamide, an intermediate which could be cyclized into 2-chloromethylquinazoline-4(3H)-one (192)  In the last decade, numerous syntheses of highly functionalized series of quinazoline derivatives have been described in the literature [187][188][189][190][191][192][193][194][195][196][197][198][199]. Kabri et al. [187] reported several studies devoted to the synthesis of 2-substituted quinazolines (Scheme 40). The key intermediates for this synthesis were easily obtained through green procedures. On the one hand, 2-aminobenzamide (190) reacted under MW-activation with chloroacetylchloride (191) to afford N-(2-aminophenyl)-2-chloroacetamide, an intermediate which could be cyclized into 2-chloromethylquinazoline-4(3H)-one (192)  These key intermediates 194 have been functionalized at position 2 according to different green procedures. On the one hand, these derivatives have been submitted to S-alkylations using sodium salts of various benzenesulfinic acid as alkylating agents. These syntheses occurred in aqueous media via a SN2 mechanism to afford the quinazoline series 196; the MW-irradiation improved drastically conversion rates and reaction times related to conventional conditions. On the other hand, ethylenic derivatives 197 have been obtained by applying MW-activation to a radical SRN1 reaction. To this end, These key intermediates 194 have been functionalized at position 2 according to different green procedures. On the one hand, these derivatives have been submitted to S-alkylations using sodium salts of various benzenesulfinic acid as alkylating agents. These syntheses occurred in aqueous media via a SN 2 mechanism to afford the quinazoline series 196; the MW-irradiation improved drastically conversion rates and reaction times related to conventional conditions. On the other hand, ethylenic derivatives 197 have been obtained by applying MW-activation to a radical S RN 1 reaction. To this end, 194 derivatives have been treated by a series of nitropropane anions. The resulting C-alkylated intermediate is unstable, and nitrous acid is eliminated rapidly in basic medium, due to the acidity of the methylene protons, resulting in the formation of 197. Under microwave irradiation, this conversion occurs quantitatively, in 15 min. This reaction has been extended to a series of various nitronate anions. Otherwise, the substitution of the chlorine by a methoxy group using MeOH in a basic medium leads to compound 198 with 71% yield even under MW-activation.
The functionalized quinazolinones 196, 197 and 198 have been chlorinated using POCl 3 through a MW-assisted chlorination procedure, affording the corresponding 199 derivatives in 70%-90% yield (Scheme 41). Then, these intermediates have been used as substrates in Suzuki-Miyaura cross-coupling reactions, to be functionalized in position 4 (compound 200). The use of MW-irradiation allowed significant improvements in terms of reaction times and conversion rates; unfortunately, these reactions were not compatible with aqueous media. In a search for new phosphodiesterases inhibitors with potential application in stroke treatment, Redondo et al. [195]  These newly synthesized compounds exhibit an overall anti-inflammatory potency, and they exert a neuroprotective activity as demonstrated by the reduction of the nitrite production in a primary neural cells culture model. In addition, in a permanent middle cerebral artery occlusion stroke model, one of these molecules improved the behavioral outcome.
A new multi-functionalized quinazoline synthesis through a four-component domino reaction has been described by Jiang et al. [196]. A series of pyrido [3,4-i]quinazoline derivatives 210 were synthesized in good to excellent yields by MW-irradiation from a mixture of aromatic aldehydes 207, various cyclic carbonyl compounds 208 and cyanoacetamide (209) in ethylene glycol using K2CO3 as base (Scheme 43). The reactions were completed in only 10-24 min, and water was the major byproduct, making workup and purification very convenient. In a search for new phosphodiesterases inhibitors with potential application in stroke treatment, Redondo et al. [195]  These newly synthesized compounds exhibit an overall anti-inflammatory potency, and they exert a neuroprotective activity as demonstrated by the reduction of the nitrite production in a primary neural cells culture model. In addition, in a permanent middle cerebral artery occlusion stroke model, one of these molecules improved the behavioral outcome.
A new multi-functionalized quinazoline synthesis through a four-component domino reaction has been described by Jiang et al. [196]. A series of pyrido[3,4-i]quinazoline derivatives 210 were synthesized in good to excellent yields by MW-irradiation from a mixture of aromatic aldehydes 207, various cyclic carbonyl compounds 208 and cyanoacetamide (209) in ethylene glycol using K2CO3 as base (Scheme 43). The reactions were completed in only 10-24 min, and water was the major byproduct, making workup and purification very convenient. These newly synthesized compounds exhibit an overall anti-inflammatory potency, and they exert a neuroprotective activity as demonstrated by the reduction of the nitrite production in a primary neural cells culture model. In addition, in a permanent middle cerebral artery occlusion stroke model, one of these molecules improved the behavioral outcome.
A new multi-functionalized quinazoline synthesis through a four-component domino reaction has been described by Jiang et al. [196]. A series of pyrido [3,4-i]quinazoline derivatives 210 were synthesized in good to excellent yields by MW-irradiation from a mixture of aromatic aldehydes 207, various cyclic carbonyl compounds 208 and cyanoacetamide (209) in ethylene glycol using K 2 CO 3 as base (Scheme 43). The reactions were completed in only 10-24 min, and water was the major byproduct, making workup and purification very convenient. The authors hypothesized, as a key step for the domino reaction, the tandem formation of two Knoevenagel intermediates, and their subsequent [4 + 2] cycloaddition, as outlined in Scheme 44. This new MW-assisted process allowed exceptional chemo-, regio-and stereoselectivity of this synthesis, as illustrated by the excellent control of the stereochemistry of the four stereogenic centers of the final quinazoline. Importantly, the X-ray crystal analyses, combined with NMR studies, allowed the unambiguous determination of the absolute configuration of the final compounds. Zhang et al. [197] have reported the first example of iron-catalyzed C-N coupling reactions in aqueous media to afford N-heterocycles. This procedure has been applied for the green synthesis of quinazolinone derivatives 213 from substituted 2-halobenzoic acids 211 and amidines 212 via MW-activation. The cyclization reaction is catalyzed by iron chloride in the presence or not of a ligand such as L-proline in water (Scheme 45). The expected products were obtained with moderated to high yields, even with inactive substrates such as guanidines. The authors hypothesized, as a key step for the domino reaction, the tandem formation of two Knoevenagel intermediates, and their subsequent [4 + 2] cycloaddition, as outlined in Scheme 44. This new MW-assisted process allowed exceptional chemo-, regio-and stereoselectivity of this synthesis, as illustrated by the excellent control of the stereochemistry of the four stereogenic centers of the final quinazoline. Importantly, the X-ray crystal analyses, combined with NMR studies, allowed the unambiguous determination of the absolute configuration of the final compounds. The authors hypothesized, as a key step for the domino reaction, the tandem formation of two Knoevenagel intermediates, and their subsequent [4 + 2] cycloaddition, as outlined in Scheme 44. This new MW-assisted process allowed exceptional chemo-, regio-and stereoselectivity of this synthesis, as illustrated by the excellent control of the stereochemistry of the four stereogenic centers of the final quinazoline. Importantly, the X-ray crystal analyses, combined with NMR studies, allowed the unambiguous determination of the absolute configuration of the final compounds. Zhang et al. [197] have reported the first example of iron-catalyzed C-N coupling reactions in aqueous media to afford N-heterocycles. This procedure has been applied for the green synthesis of quinazolinone derivatives 213 from substituted 2-halobenzoic acids 211 and amidines 212 via MW-activation. The cyclization reaction is catalyzed by iron chloride in the presence or not of a ligand such as L-proline in water (Scheme 45). The expected products were obtained with moderated to high yields, even with inactive substrates such as guanidines. Zhang et al. [197] have reported the first example of iron-catalyzed C-N coupling reactions in aqueous media to afford N-heterocycles. This procedure has been applied for the green synthesis of quinazolinone derivatives 213 from substituted 2-halobenzoic acids 211 and amidines 212 via MW-activation. The cyclization reaction is catalyzed by iron chloride in the presence or not of a ligand such as L-proline in water (Scheme 45). The expected products were obtained with moderated to high yields, even with inactive substrates such as guanidines.
Zhang et al. [197] have reported the first example of iron-catalyzed C-N coupling reactions in aqueous media to afford N-heterocycles. This procedure has been applied for the green synthesis of quinazolinone derivatives 213 from substituted 2-halobenzoic acids 211 and amidines 212 via MW-activation. The cyclization reaction is catalyzed by iron chloride in the presence or not of a ligand such as L-proline in water (Scheme 45). The expected products were obtained with moderated to high yields, even with inactive substrates such as guanidines. A simple and green one-pot synthesis of octahydroquinazolinone derivatives under solvent-free MW-assisted conditions has been described Niralwad et al. [198]. The reaction was performed by adding substituted benzaldehydes 214, dimedone (215) and urea (or thiourea) 216 in the presence of ammonium metavanadate as catalyst (Scheme 46). The procedure afforded the desired octahydro-quinazolinone derivatives 217 in high yields after a short reaction time. A simple and green one-pot synthesis of octahydroquinazolinone derivatives under solvent-free MW-assisted conditions has been described Niralwad et al. [198]. The reaction was performed by adding substituted benzaldehydes 214, dimedone (215) and urea (or thiourea) 216 in the presence of ammonium metavanadate as catalyst (Scheme 46). The procedure afforded the desired octahydroquinazolinone derivatives 217 in high yields after a short reaction time. Scheme 46. MCR reaction leading to octahydroquinazolinones using ammonium metavanadate as catalyst.
A novel series of quinazolinone amino acid ester and quinazolinone amino acid hydrazides were prepared by Khattab et al. [199] under MW-irradiation and compared with conventional conditions. For example, the reaction of methyl (2-aminobenzamido) ester derivatives 218 with different aldehydes under conventional conditions (reflux for 8 h) or by using MW irradiation (10 min) afforded the substituted quinazolinone amino acid esters 219. In a second step, these intermediates reacted with hydrazine hydrate using conventional heating (8 h) or microwave irradiation (10 min) to yield the corresponding hydrazides 220 (Scheme 47). MW-irradiation afforded the expected hydrazides with shortened reaction times and improved yields compared to conventional heating. Scheme 47. MW-assisted synthesis of quinazolinones with a potential activity as MAO inhibitiors.
Moreover, these compounds have been studied for their activity on monoamine oxidases Scheme 46. MCR reaction leading to octahydroquinazolinones using ammonium metavanadate as catalyst.
A novel series of quinazolinone amino acid ester and quinazolinone amino acid hydrazides were prepared by Khattab et al. [199] under MW-irradiation and compared with conventional conditions. For example, the reaction of methyl (2-aminobenzamido) ester derivatives 218 with different aldehydes under conventional conditions (reflux for 8 h) or by using MW irradiation (10 min) afforded the substituted quinazolinone amino acid esters 219. In a second step, these intermediates reacted with hydrazine hydrate using conventional heating (8 h) or microwave irradiation (10 min) to yield the corresponding hydrazides 220 (Scheme 47). MW-irradiation afforded the expected hydrazides with shortened reaction times and improved yields compared to conventional heating.
Moreover, these compounds have been studied for their activity on monoamine oxidases (MAO). Indeed, three compounds exhibited IC 50 values in the 2-3.6 nM range against MAO-A which is close to the value obtained with the standard inhibitor, clorgyline (IC 50 = 2.9 nM). Interestingly, these compounds do not exhibit oral and parental acute toxicity as demonstrated by in vivo experiments on male mice. In this assay, the animals tolerated up to 300 mg/Kg of the drug (oral administration) and up to 125 mg/Kg dose by parenteral administration.
For example, the reaction of methyl (2-aminobenzamido) ester derivatives 218 with different aldehydes under conventional conditions (reflux for 8 h) or by using MW irradiation (10 min) afforded the substituted quinazolinone amino acid esters 219. In a second step, these intermediates reacted with hydrazine hydrate using conventional heating (8 h) or microwave irradiation (10 min) to yield the corresponding hydrazides 220 (Scheme 47). MW-irradiation afforded the expected hydrazides with shortened reaction times and improved yields compared to conventional heating. Scheme 47. MW-assisted synthesis of quinazolinones with a potential activity as MAO inhibitiors.
Moreover, these compounds have been studied for their activity on monoamine oxidases (MAO). Indeed, three compounds exhibited IC50 values in the 2-3.6 nM range against MAO-A which is close to the value obtained with the standard inhibitor, clorgyline (IC50 = 2.9 nM). Interestingly, these compounds do not exhibit oral and parental acute toxicity as demonstrated by in vivo experiments on male mice. In this assay, the animals tolerated up to 300 mg/Kg of the drug (oral administration) and up to 125 mg/Kg dose by parenteral administration.

Scheme 48. MW-assisted Ugi 4-component reaction leading to piperazines.
Jainta et al. [205] have described a MW-assisted stereoselective one-pot synthesis of symmetrical and unsymmetrical 2,5-diketopiperazines (Scheme 49). The reaction was carried out via a facile Jainta et al. [205] have described a MW-assisted stereoselective one-pot synthesis of symmetrical and unsymmetrical 2,5-diketopiperazines (Scheme 49). The reaction was carried out via a facile condensation of unprotected amino acids 232 by a phosphite-promoted one-step coupling reaction. This method leads to the expected compounds 233 with good overall yields. This strategy can be used for large-scale synthesis and is compatible with several protecting groups. Importantly, neither racemization nor inversion of the stereochemistry has been reported when chiral starting materials were used. Lastly, the final work-up, which consist on a simple filtration step in order to remove the ammonium salts and ionic liquid is very easy and no further purifications are required. Therefore, the expected 2,5-diketopiperazines were obtained in quantitative yields. This method leads to the expected compounds 233 with good overall yields. This strategy can be used for large-scale synthesis and is compatible with several protecting groups. Importantly, neither racemization nor inversion of the stereochemistry has been reported when chiral starting materials were used. Lastly, the final work-up, which consist on a simple filtration step in order to remove the ammonium salts and ionic liquid is very easy and no further purifications are required. Therefore, the expected 2,5-diketopiperazines were obtained in quantitative yields.
A general and efficient method for the synthesis of spiro-2,5-diketopiperazines (e.g. 238, spiro-DKPs) has been described by Jam et al. [206]. In the first step of this preparation, spiro-amino acids were synthesized by combining in the one hand, stereoselective alkylation reactions for amino acid construction (Schoellkopf synthesis) and on the other hand, a Grubbs ring-closing metathesis catalyzed by ruthenium complexes. Next, the Boc-protected dipeptides containing spiro-amino acids were cyclized through MW activation in water to afford the corresponding spiro-DKPs in high yields and short reaction times (Scheme 50). A general and efficient method for the synthesis of spiro-2,5-diketopiperazines (e.g. 238, spiro-DKPs) has been described by Jam et al. [206]. In the first step of this preparation, spiro-amino acids were synthesized by combining in the one hand, stereoselective alkylation reactions for amino acid construction (Schoellkopf synthesis) and on the other hand, a Grubbs ring-closing metathesis catalyzed by ruthenium complexes. Next, the Boc-protected dipeptides containing spiro-amino acids were cyclized through MW activation in water to afford the corresponding spiro-DKPs in high yields and short reaction times (Scheme 50). Scheme 49. One-pot stereoselective synthesis of 2,5-diketopiperazines.
A general and efficient method for the synthesis of spiro-2,5-diketopiperazines (e.g. 238, spiro-DKPs) has been described by Jam et al. [206]. In the first step of this preparation, spiro-amino acids were synthesized by combining in the one hand, stereoselective alkylation reactions for amino acid construction (Schoellkopf synthesis) and on the other hand, a Grubbs ring-closing metathesis catalyzed by ruthenium complexes. Next, the Boc-protected dipeptides containing spiro-amino acids were cyclized through MW activation in water to afford the corresponding spiro-DKPs in high yields and short reaction times (Scheme 50). Scheme 50. Synthetic route to spiro-fused 2,5-diketopiperazines via sequential Schoellkopf ring-closing metathesis reactions. Scheme 50. Synthetic route to spiro-fused 2,5-diketopiperazines via sequential Schoellkopf ring-closing metathesis reactions.
Pyrazine is a six membered hetero-aromatic ring usually found in the structure of numerous natural products and synthetic compounds, some of which are used in the food industry for their flavor properties [222][223][224]. Moreover, they are versatile synthetic intermediates [225], and many functionalized pyrazines possess pharmacological activities, such as antiviral [226,227] (242, 243), ATR kinase inhibitor [228] (244), antitumor [229], vascular endothelial growth factor inhibitory activity [230], or as epithelial sodium channel blockers [231] (Figure 15). Original synthetic heterocycles, such as substituted dicyanopyrazines 247, 248, have been synthesized using a domestic MW oven [232]. The reaction proceeded by a cyclocondensation of diaminomalonitrile with ketones (e.g., acenaphthenequinone, 245) or an ester 246 in the presence of triethylamine in ethanol (Scheme 52), and the expected products were obtained with good to excellent yields.  Original synthetic heterocycles, such as substituted dicyanopyrazines 247, 248, have been synthesized using a domestic MW oven [232]. The reaction proceeded by a cyclocondensation of diaminomalonitrile with ketones (e.g., acenaphthenequinone, 245) or an ester 246 in the presence of triethylamine in ethanol (Scheme 52), and the expected products were obtained with good to excellent yields.
Pyrazine is a six membered hetero-aromatic ring usually found in the structure of numerous natural products and synthetic compounds, some of which are used in the food industry for their flavor properties [222][223][224]. Moreover, they are versatile synthetic intermediates [225], and many functionalized pyrazines possess pharmacological activities, such as antiviral [226,227] (242, 243), ATR kinase inhibitor [228] (244), antitumor [229], vascular endothelial growth factor inhibitory activity [230], or as epithelial sodium channel blockers [231] (Figure 15). Original synthetic heterocycles, such as substituted dicyanopyrazines 247, 248, have been synthesized using a domestic MW oven [232]. The reaction proceeded by a cyclocondensation of diaminomalonitrile with ketones (e.g., acenaphthenequinone, 245) or an ester 246 in the presence of triethylamine in ethanol (Scheme 52), and the expected products were obtained with good to excellent yields.  These results prompted the authors to use also 2-alkynylbenzaldehydes 252 as starting material for this annulation reaction. As anticipated, these compounds afforded the isoquinolines 253 under MW-irradiation and in the presence of ammonia, but no catalyst was required in this case due to the higher reactivity of the aldehyde (Scheme 55). This annulation proceeded regiospecificaly, through a 6-endo-dig mechanism. The authors hypothesized a mechanism involving the formation of an imine, subsequent cyclization and then proton shift. They reported a total regioselectivity for the cyclization, since they never observed the formation of any 5-exo-dig cyclization adduct. They demonstrated that this selectivity could be attributed to a higher thermodynamic stability of the zwitterionic intermediate resulting from the 6-endo-dig mechanism (Scheme 56). These results prompted the authors to use also 2-alkynylbenzaldehydes 252 as starting material for this annulation reaction. As anticipated, these compounds afforded the isoquinolines 253 under MW-irradiation and in the presence of ammonia, but no catalyst was required in this case due to the higher reactivity of the aldehyde (Scheme 55). This annulation proceeded regiospecificaly, through a 6-endo-dig mechanism. The authors hypothesized a mechanism involving the formation of an imine, subsequent cyclization and then proton shift. They reported a total regioselectivity for the cyclization, since they never observed the formation of any 5-exo-dig cyclization adduct. They demonstrated that this selectivity could be attributed to a higher thermodynamic stability of the zwitterionic intermediate resulting from the 6-endo-dig mechanism (Scheme 56). These results prompted the authors to use also 2-alkynylbenzaldehydes 252 as starting material for this annulation reaction. As anticipated, these compounds afforded the isoquinolines 253 under MW-irradiation and in the presence of ammonia, but no catalyst was required in this case due to the higher reactivity of the aldehyde (Scheme 55). This annulation proceeded regiospecificaly, through a 6-endo-dig mechanism. The authors hypothesized a mechanism involving the formation of an imine, subsequent cyclization and then proton shift. They reported a total regioselectivity for the cyclization, since they never observed the formation of any 5-exo-dig cyclization adduct. They demonstrated that this selectivity could be attributed to a higher thermodynamic stability of the zwitterionic intermediate resulting from the 6-endo-dig mechanism (Scheme 56). These results prompted the authors to use also 2-alkynylbenzaldehydes 252 as starting material for this annulation reaction. As anticipated, these compounds afforded the isoquinolines 253 under MW-irradiation and in the presence of ammonia, but no catalyst was required in this case due to the higher reactivity of the aldehyde (Scheme 55). This annulation proceeded regiospecificaly, through a 6-endo-dig mechanism. The authors hypothesized a mechanism involving the formation of an imine, subsequent cyclization and then proton shift. They reported a total regioselectivity for the cyclization, since they never observed the formation of any 5-exo-dig cyclization adduct. They demonstrated that this selectivity could be attributed to a higher thermodynamic stability of the zwitterionic intermediate resulting from the 6-endo-dig mechanism (Scheme 56). Scheme 55. Synthesis of isoquinolines through a imination/annulation tandem reaction.
An original synthetic route to pyrazolo [3,4-b]pyrazine derivatives 261 has been described by Quiroga et al. [239], which proceeds through a MW-induced cyclocondensation of ortho-aminonitrosopyrazoles 259 and cyclic β-diketones 260 in DMF through an extension of the Ehrlich-Sachs reaction (Scheme 58). According to the authors' hypothesis, the reaction is initiated by chemo-selective addition of the enol tautomer of the diketone to the nitroso group of the pyrazole, resulting in formation of an imine. This intermediate undergoes an intramolecular N-cyclization involving the amino group (NH2) of the pyrazole and the remaining carbonyl group (Scheme 59). The compounds were isolated in moderate to good yields, and easily purified via recrystallizations. The use of classical heating instead of MW required longer reaction times and led to lower conversion rates. Scheme 58. MW-assisted Ehrlich-Sachs type reaction leading to pyrazolo [3,4-b]pyrazines.

Scheme 59.
Mechanistic study of the pyrazolo [3,4-b]pyrazines synthesis reported by Quiroga et al. [239]. An original synthetic route to pyrazolo [3,4-b]pyrazine derivatives 261 has been described by Quiroga et al. [239], which proceeds through a MW-induced cyclocondensation of ortho-aminonitrosopyrazoles 259 and cyclic β-diketones 260 in DMF through an extension of the Ehrlich-Sachs reaction (Scheme 58). According to the authors' hypothesis, the reaction is initiated by chemo-selective addition of the enol tautomer of the diketone to the nitroso group of the pyrazole, resulting in formation of an imine. This intermediate undergoes an intramolecular N-cyclization involving the amino group (NH 2 ) of the pyrazole and the remaining carbonyl group (Scheme 59). The compounds were isolated in moderate to good yields, and easily purified via recrystallizations. The use of classical heating instead of MW required longer reaction times and led to lower conversion rates.
An original synthetic route to pyrazolo [3,4-b]pyrazine derivatives 261 has been described by Quiroga et al. [239], which proceeds through a MW-induced cyclocondensation of ortho-aminonitrosopyrazoles 259 and cyclic β-diketones 260 in DMF through an extension of the Ehrlich-Sachs reaction (Scheme 58). According to the authors' hypothesis, the reaction is initiated by chemo-selective addition of the enol tautomer of the diketone to the nitroso group of the pyrazole, resulting in formation of an imine. This intermediate undergoes an intramolecular N-cyclization involving the amino group (NH2) of the pyrazole and the remaining carbonyl group (Scheme 59). The compounds were isolated in moderate to good yields, and easily purified via recrystallizations. The use of classical heating instead of MW required longer reaction times and led to lower conversion rates. Scheme 58. MW-assisted Ehrlich-Sachs type reaction leading to pyrazolo [3,4-b]pyrazines.
An original synthetic route to pyrazolo [3,4-b]pyrazine derivatives 261 has been described by Quiroga et al. [239], which proceeds through a MW-induced cyclocondensation of ortho-aminonitrosopyrazoles 259 and cyclic β-diketones 260 in DMF through an extension of the Ehrlich-Sachs reaction (Scheme 58). According to the authors' hypothesis, the reaction is initiated by chemo-selective addition of the enol tautomer of the diketone to the nitroso group of the pyrazole, resulting in formation of an imine. This intermediate undergoes an intramolecular N-cyclization involving the amino group (NH2) of the pyrazole and the remaining carbonyl group (Scheme 59). The compounds were isolated in moderate to good yields, and easily purified via recrystallizations. The use of classical heating instead of MW required longer reaction times and led to lower conversion rates. Scheme 58. MW-assisted Ehrlich-Sachs type reaction leading to pyrazolo [3,4-b]pyrazines.
Xing et al. [261] have reported a MW-assisted one-pot synthesis of highly functionalized 3,4-dihydro-  A two-component solvent-free procedure for the synthesis of 2-oxazines 265 under thermal and MW conditions has been described by Ge et al. [259]. Thus, mono-and bisoxazines were selectively synthesized in good to excellent yields and with shortened reaction times (Scheme 60). The authors have improved the reaction by using a combination of sulfur along with Co(NO 3 ) 2 as the catalytic system. In addition, the catalyst can be reused at least seven times without significant loss of activity. Oxazine derivatives are also considered as important pharmacophores in drug discovery ( Figure 16). Indeed, a large number of natural and synthetic bioactive compounds contain a 2H-1,4-benzoxazine scaffold [240]. For instance, the enediyne antitumor antibiotic, C-1027 [241] consists of a 2-methylene-3,4dihydro-3-oxo-2H-1,4-benzoxazine moiety in the chromophore subunit. Many derivatives of 2H-1,4benzoxazine have been reported as plant resistance factors against insects and also microbial diseases [242], serotonin-3 (5-HT3) receptor antagonists [243][244][245], potassium channel modulators [246], etc. The 3,4-dihydro-3-oxo-2H-1,4-benzoxazine scaffold is also considered a bioisoster for 2(3H)-benzoxazolone [247] and is used as a privileged scaffold in drug design. Benzo [1,4]oxazin-3-one derivatives also exhibit multiple biological activities, such as anti-inflammatory [248], antiulcer [249], antipyretic [250], antihypertensive [251], and antifungal properties [252]. Some of them also act as 5-HT ligands [253], DP receptor antagonists [254] and integrin antagonists [255]. Therefore, the benzo[1,4]-oxazin-3-one scaffold can be pointed out as a very "privileged pharmacophore" [256][257][258]. A two-component solvent-free procedure for the synthesis of 2-oxazines 265 under thermal and MW conditions has been described by Ge et al. [259]. Thus, mono-and bisoxazines were selectively synthesized in good to excellent yields and with shortened reaction times (Scheme 60). The authors have improved the reaction by using a combination of sulfur along with Co(NO3)2 as the catalytic system. In addition, the catalyst can be reused at least seven times without significant loss of activity. De Moliner et al. [260] reported the synthesis of novel series of triazolo-fused oxazinones 270, in a two step procedure. The synthesis occurs through a MW-assisted Passerini cycloaddition process. In this protocol, the authors have obtained the three-component adducts in moderate to good yields, by reacting α-azido aldehydes, generated in situ by oxidation of corresponding α-azido alcohols with iodobenzoïc acid (IBX, 266) with isocyanides 267 and various propiolic acids 268 (Scheme 61). The triazolo-fused dihydro-oxazinones have been obtained as an equimolar mixture of diastereoisomers through a straightforward azide-alkyne dipolar cycloaddition.
Xing et al. [261] have reported a MW-assisted one-pot synthesis of highly functionalized 3,4-dihydro- De Moliner et al. [260] reported the synthesis of novel series of triazolo-fused oxazinones 270, in a two step procedure. The synthesis occurs through a MW-assisted Passerini cycloaddition process. In this protocol, the authors have obtained the three-component adducts in moderate to good yields, by reacting α-azido aldehydes, generated in situ by oxidation of corresponding α-azido alcohols with iodobenzoïc acid (IBX, 266) with isocyanides 267 and various propiolic acids 268 (Scheme 61). The triazolo-fused dihydro-oxazinones have been obtained as an equimolar mixture of diastereoisomers through a straightforward azide-alkyne dipolar cycloaddition.
Xing et al.

Six-Membered Heterocycles with Three or Four Nitrogen: Triazines and Tetrazines
The π-deficient triazines [262] and tetrazines [262,263] are relevant building blocks for more complex molecules as such heterocycles can be used as reactants in LUMO diene-controlled [4+2] inverse electron demand Diels-Alder cycloaddition processes, which efficiently lead to substituted dihydropyridazines, pyridazines, pyrimidines, or pyridine derivatives [264]. The pioneering work dealing with this so-called Carboni-Lindsey reaction has been reviewed by Boger [265]. Triazine and tetrazine derivatives are commonly used as commercial dyes [266], as insecticides [267] and more recently as pharmaceutical agents ( Figure 17) [268,269]. Many examples of Diels-Alder reactions leading to new series of triazines and tetrazines have been described in the last decade [262], and among them several proceeded through a MW-assisted procedure. In marked contrast to the triazine derivatives, which have been extensively reviewed in recent years, MW-assisted syntheses of tetrazines remain more underreported, and this review has allowed us to highlight some representative preparations of this system.

Six-Membered Heterocycles with Three or Four Nitrogen: Triazines and Tetrazines
The π-deficient triazines [262] and tetrazines [262,263] are relevant building blocks for more complex molecules as such heterocycles can be used as reactants in LUMO diene-controlled [4+2] inverse electron demand Diels-Alder cycloaddition processes, which efficiently lead to substituted dihydropyridazines, pyridazines, pyrimidines, or pyridine derivatives [264]. The pioneering work dealing with this so-called Carboni-Lindsey reaction has been reviewed by Boger [265]. Triazine and tetrazine derivatives are commonly used as commercial dyes [266], as insecticides [267] and more recently as pharmaceutical agents ( Figure 17) [268,269]. Many examples of Diels-Alder reactions leading to new series of triazines and tetrazines have been described in the last decade [262], and among them several proceeded through a MW-assisted procedure. In marked contrast to the triazine derivatives, which have been extensively reviewed in recent years, MW-assisted syntheses of tetrazines remain more underreported, and this review has allowed us to highlight some representative preparations of this system.

Six-Membered Heterocycles with Three or Four Nitrogen: Triazines and Tetrazines
The π-deficient triazines [262] and tetrazines [262,263] are relevant building blocks for more complex molecules as such heterocycles can be used as reactants in LUMO diene-controlled [4+2] inverse electron demand Diels-Alder cycloaddition processes, which efficiently lead to substituted dihydropyridazines, pyridazines, pyrimidines, or pyridine derivatives [264]. The pioneering work dealing with this so-called Carboni-Lindsey reaction has been reviewed by Boger [265]. Triazine and tetrazine derivatives are commonly used as commercial dyes [266], as insecticides [267] and more recently as pharmaceutical agents ( Figure 17) [268,269]. Many examples of Diels-Alder reactions leading to new series of triazines and tetrazines have been described in the last decade [262], and among them several proceeded through a MW-assisted procedure. In marked contrast to the triazine derivatives, which have been extensively reviewed in recent years, MW-assisted syntheses of tetrazines remain more underreported, and this review has allowed us to highlight some representative preparations of this system.

Six-Membered Heterocycles with Three or Four Nitrogen: Triazines and Tetrazines
The π-deficient triazines [262] and tetrazines [262,263] are relevant building blocks for more complex molecules as such heterocycles can be used as reactants in LUMO diene-controlled [4+2] inverse electron demand Diels-Alder cycloaddition processes, which efficiently lead to substituted dihydropyridazines, pyridazines, pyrimidines, or pyridine derivatives [264]. The pioneering work dealing with this so-called Carboni-Lindsey reaction has been reviewed by Boger [265]. Triazine and tetrazine derivatives are commonly used as commercial dyes [266], as insecticides [267] and more recently as pharmaceutical agents ( Figure 17) [268,269]. Many examples of Diels-Alder reactions leading to new series of triazines and tetrazines have been described in the last decade [262], and among them several proceeded through a MW-assisted procedure. In marked contrast to the triazine derivatives, which have been extensively reviewed in recent years, MW-assisted syntheses of tetrazines remain more underreported, and this review has allowed us to highlight some representative preparations of this system. A practical MW-assisted method for the direct transformation of aldehydes 281 and primary alcohols 282 into triazines in aqueous media was described by Shie et al. [270] The alcohols and aldehydes reacted with iodine in aqueous ammonia to provide the corresponding nitrile intermediates 283, which readily underwent [2+3] cycloadditions with dicyandiamide (284) under MW-irradiation at approximately 80 °C for 15-30 min to give the corresponding 4-aryl-2,6-diamino-1,3,5 triazines 285 in 69%-83% yields (Scheme 64). This method circumvents the problem of prior preparation of nitrile compounds from halides and toxic cyanides. The one-pot tandem reactions were conducted in aqueous media, and the products were obtained simply by filtration. In comparison with the previously reported heating methods, microwave irradiation has an advantage in shortening reaction times and increasing the transformation yields. Scheme 64. One-pot tandem reaction in aqueous media leading to 1,3,5-triazines.
Recently, Li et al. [271] have developed an efficient method for the synthesis of a series of N-arylamino substituted 1,3,5-triazines, which consist on a base-promoted domino [3+2+1] heterocyclization between aromatic isothiocyanates 286 and aryl amidines 287 in the presence of NaOH under MW-activation. The synthesis showed attractive properties such as concise one-pot conditions, short reaction times (15-24 min), and easy purification of the crude material. In addition, final 1,3,5-triazine derivatives 288 have been obtained with good yields (60%-78%) (Scheme 65). A practical MW-assisted method for the direct transformation of aldehydes 281 and primary alcohols 282 into triazines in aqueous media was described by Shie et al. [270] The alcohols and aldehydes reacted with iodine in aqueous ammonia to provide the corresponding nitrile intermediates 283, which readily underwent [2+3] cycloadditions with dicyandiamide (284) under MW-irradiation at approximately 80˝C for 15-30 min to give the corresponding 4-aryl-2,6-diamino-1,3,5 triazines 285 in 69%-83% yields (Scheme 64). This method circumvents the problem of prior preparation of nitrile compounds from halides and toxic cyanides. The one-pot tandem reactions were conducted in aqueous media, and the products were obtained simply by filtration. In comparison with the previously reported heating methods, microwave irradiation has an advantage in shortening reaction times and increasing the transformation yields. A practical MW-assisted method for the direct transformation of aldehydes 281 and primary alcohols 282 into triazines in aqueous media was described by Shie et al. [270] The alcohols and aldehydes reacted with iodine in aqueous ammonia to provide the corresponding nitrile intermediates 283, which readily underwent [2+3] cycloadditions with dicyandiamide (284) under MW-irradiation at approximately 80 °C for 15-30 min to give the corresponding 4-aryl-2,6-diamino-1,3,5 triazines 285 in 69%-83% yields (Scheme 64). This method circumvents the problem of prior preparation of nitrile compounds from halides and toxic cyanides. The one-pot tandem reactions were conducted in aqueous media, and the products were obtained simply by filtration. In comparison with the previously reported heating methods, microwave irradiation has an advantage in shortening reaction times and increasing the transformation yields. Scheme 64. One-pot tandem reaction in aqueous media leading to 1,3,5-triazines.
Recently, Li et al. [271] have developed an efficient method for the synthesis of a series of N-arylamino substituted 1,3,5-triazines, which consist on a base-promoted domino [3+2+1] heterocyclization between aromatic isothiocyanates 286 and aryl amidines 287 in the presence of NaOH under MW-activation. The synthesis showed attractive properties such as concise one-pot conditions, short reaction times (15-24 min), and easy purification of the crude material. In addition, final 1,3,5-triazine derivatives 288 have been obtained with good yields (60%-78%) (Scheme 65).
Recently, Li et al. [271] have developed an efficient method for the synthesis of a series of N-arylamino substituted 1,3,5-triazines, which consist on a base-promoted domino [3+2+1] heterocyclization between aromatic isothiocyanates 286 and aryl amidines 287 in the presence of NaOH under MW-activation. The synthesis showed attractive properties such as concise one-pot conditions, short reaction times (15-24 min), and easy purification of the crude material. In addition, final 1,3,5-triazine derivatives 288 have been obtained with good yields (60%-78%) (Scheme 65). Moreover, Moody and co-workers [272,273] have reported the synthesis of 1,2,4-triazines using a new two-step sequence for the conversion of hydrazides 289 to triazines 291. The key steps are N-H insertion by a copper carbene intermediate derived from α-diazo-β-ketoesters 290 into the hydrazide, followed by reaction with ammonium acetate to give 1,2,4-triazines. The authors showed that the use of copper(II) combined with MW-irradiation accelerate the reaction. A diverse set of trifluoromethyl-1,2,4-triazines 291 have been obtained in moderate to good yields (28%-91%) (Scheme 66). Moreover, Moody and co-workers [272,273] have reported the synthesis of 1,2,4-triazines using a new two-step sequence for the conversion of hydrazides 289 to triazines 291. The key steps are N-H insertion by a copper carbene intermediate derived from α-diazo-β-ketoesters 290 into the hydrazide, followed by reaction with ammonium acetate to give 1,2,4-triazines. The authors showed that the use of copper(II) combined with MW-irradiation accelerate the reaction. A diverse set of trifluoromethyl-1,2,4-triazines 291 have been obtained in moderate to good yields (28%-91%) (Scheme 66). Scheme 66. Two-step synthesis of 1,2,4-triazines.
Sagot et al. [275] have reported the efficient synthesis of poly(2,6-pyridinediyl-dihydro-stetrazinylene) (295) from pyridine-2,6-diamidrazone (294) under MW-activation. The reaction conditions were optimized, and the best result was obtained by the application of an irradiation power of 40 W at 150 °C for 20 min to give the polymer in a 47% yield (Scheme 68). Moreover, Moody and co-workers [272,273] have reported the synthesis of 1,2,4-triazines using a new two-step sequence for the conversion of hydrazides 289 to triazines 291. The key steps are N-H insertion by a copper carbene intermediate derived from α-diazo-β-ketoesters 290 into the hydrazide, followed by reaction with ammonium acetate to give 1,2,4-triazines. The authors showed that the use of copper(II) combined with MW-irradiation accelerate the reaction. A diverse set of trifluoromethyl-1,2,4-triazines 291 have been obtained in moderate to good yields (28%-91%) (Scheme 66). On account of the simultaneous presence of four nitrogen atoms in the ring, tetrazines are even more reactive towards nucleophilic agents than triazines, including inverse electron demand in Diels-Alder reactions. Therefore, no data on Diels-Alder reactions of 1,2,3,4-tetrazines and 1,2,3,5-tetrazines have been published, and the term tetrazines will henceforth refer to 1,2,4,5-tetrazines (s-tetrazines).
Sagot et al. [275] have reported the efficient synthesis of poly(2,6-pyridinediyl-dihydro-stetrazinylene) (295) from pyridine-2,6-diamidrazone (294) under MW-activation. The reaction conditions were optimized, and the best result was obtained by the application of an irradiation power of 40 W at 150 °C for 20 min to give the polymer in a 47% yield (Scheme 68). On account of the simultaneous presence of four nitrogen atoms in the ring, tetrazines are even more reactive towards nucleophilic agents than triazines, including inverse electron demand in Diels-Alder reactions. Therefore, no data on Diels-Alder reactions of 1,2,3,4-tetrazines and 1,2,3,5-tetrazines have been published, and the term tetrazines will henceforth refer to 1,2,4,5-tetrazines (s-tetrazines).
Sagot et al. [275] have reported the efficient synthesis of poly(2,6-pyridinediyl-dihydro-stetrazinylene) (295) from pyridine-2,6-diamidrazone (294) under MW-activation. The reaction conditions were optimized, and the best result was obtained by the application of an irradiation power of 40 W at 150˝C for 20 min to give the polymer in a 47% yield (Scheme 68). Scheme 67. MW-synthesis of 1,2,4-triazines by reaction of oxazolines with hydrazine hydrochloride.

Conclusions
The examples described in this review illustrate that MW-assisted synthesis lead to various heterocyclic systems on an easy and rapid way. We reviewed herein the synthesis of six-membered rings (one to four heteroatoms) and their fused analogues that feature interesting pharmaceutical activities. Many of the early reactions were performed in a dedicated monomode MW-reactor and in simple or "adapted" domestic instruments and some of them also respect the basic rules of green chemistry.
This review is not intended to be exhaustive in its content, but rather to emphasize significant examples where MW irradiation has been either facilitating the synthesis or has afforded a clear methodological advantage over classical and conventional thermal methods. The description of the combination of heterocyclic chemistry and MW irradiation has also shown that performing MW-assisted reactions should be considered with particular attention. A few of these considerations can be applied generally for conducting MW-assisted reactions and include the following: (a) the ratio between the quantity of catalyst or the material and the support or the solvent is very important; (b) for solid starting materials, the use of solid supports can offer operational, economic and environmental benefits over conventional methods. Other aspects can comprise unanswered questions relating to the existence of "intrinsic MW effects," and the scalability, and overall energy efficiency of this technique ( Figure 18).
This technology is still under-used and has the potential to have a large impact on the fields of catalysis, screening, combinatorial chemistry, medicinal chemistry and drug development.

Conclusions
The examples described in this review illustrate that MW-assisted synthesis lead to various heterocyclic systems on an easy and rapid way. We reviewed herein the synthesis of six-membered rings (one to four heteroatoms) and their fused analogues that feature interesting pharmaceutical activities. Many of the early reactions were performed in a dedicated monomode MW-reactor and in simple or "adapted" domestic instruments and some of them also respect the basic rules of green chemistry.
This review is not intended to be exhaustive in its content, but rather to emphasize significant examples where MW irradiation has been either facilitating the synthesis or has afforded a clear methodological advantage over classical and conventional thermal methods. The description of the combination of heterocyclic chemistry and MW irradiation has also shown that performing MW-assisted reactions should be considered with particular attention. A few of these considerations can be applied generally for conducting MW-assisted reactions and include the following: (a) the ratio between the quantity of catalyst or the material and the support or the solvent is very important; (b) for solid starting materials, the use of solid supports can offer operational, economic and environmental benefits over conventional methods. Other aspects can comprise unanswered questions relating to the existence of "intrinsic MW effects," and the scalability, and overall energy efficiency of this technique ( Figure 18). This technology is still under-used and has the potential to have a large impact on the fields of catalysis, screening, combinatorial chemistry, medicinal chemistry and drug development.
examples where MW irradiation has been either facilitating the synthesis or has afforded a clear methodological advantage over classical and conventional thermal methods. The description of the combination of heterocyclic chemistry and MW irradiation has also shown that performing MW-assisted reactions should be considered with particular attention. A few of these considerations can be applied generally for conducting MW-assisted reactions and include the following: (a) the ratio between the quantity of catalyst or the material and the support or the solvent is very important; (b) for solid starting materials, the use of solid supports can offer operational, economic and environmental benefits over conventional methods. Other aspects can comprise unanswered questions relating to the existence of "intrinsic MW effects," and the scalability, and overall energy efficiency of this technique ( Figure 18). This technology is still under-used and has the potential to have a large impact on the fields of catalysis, screening, combinatorial chemistry, medicinal chemistry and drug development.