Ruthenium Tetroxide and Perruthenate Chemistry. Recent Advances and Related Transformations Mediated by Other Transition Metal Oxo-species

In the last years ruthenium tetroxide is increasingly being used in organic synthesis. Thanks to the fine tuning of the reaction conditions, including pH control of the medium and the use of a wider range of co-oxidants, this species has proven to be a reagent able to catalyse useful synthetic transformations which are either a valuable alternative to established methods or even, in some cases, the method of choice. Protocols for oxidation of hydrocarbons, oxidative cleavage of C–C double bonds, even stopping the process at the aldehyde stage, oxidative cleavage of terminal and internal alkynes, oxidation of alcohols to carboxylic acids, dihydroxylation of alkenes, oxidative degradation of phenyl and other heteroaromatic nuclei, oxidative cyclization of dienes, have now reached a good level of improvement and are more and more included into complex synthetic sequences. The perruthenate ion is a ruthenium (VII) oxo-species. Since its introduction in the mid-eighties, tetrapropylammonium perruthenate (TPAP) has reached a great popularity among organic chemists and it is mostly employed in catalytic amounts in conjunction with N-methylmorpholine N-oxide (NMO) for the mild oxidation of primary and secondary alcohols to carbonyl compounds. Its use in the oxidation of other functionalities is known and recently, its utility in new synthetic transformations has been demonstrated. New processes, synthetic applications, theoretical studies and unusual transformations, published in the last eight years (2006–2013), in the chemistry of these two oxo-species, will be covered in this review with the aim of offering a clear picture of their reactivity. When appropriate, related oxidative transformations mediated by other metal oxo-species will be presented to highlight similarities and differences. An historical overview of some aspects of the ruthenium tetroxide chemistry will be presented as well.


Introduction
Oxidation is one of the fundamental reactions in synthetic organic chemistry both in academia and industry and there is always demand for selective and mild oxidation methods. Indeed, numerous research groups have directed their efforts towards the development of novel oxidation processes and the trend is relentless. In particular, significant progress has been achieved within the area of catalytic oxidations. In this regard transition metal oxo-species such as OsO 4 [3][4][5], rhenium [6,7] and references therein] and chromium oxo-species [8], play a primary role since they catalyze a wide spectrum of synthetically useful oxidative transformations [9,10].

An Historical Overview
It is recognised that ruthenium tetroxide [11][12][13][14][15] was introduced as an organic oxidant in 1953 by Djerassi and Engle [16] who used this reagent to oxidise phenanthrene and a range of sulfides. The oxidation of a variety of compounds ensued [17] generally using catalytic amounts of a ruthenium precatalyst, usually RuCl 3 hydrate or ruthenium dioxide, in the presence of a co-oxidant [18]. These processes were often reported to be slow or incomplete generally due to the precipitation of rutheniumcontaining species. It was not until the report by Sharpless and co-workers [19], almost thirty years later, that a new effective catalytic oxidative protocol was introduced. In particular, based upon the assumption that carboxylic acids, generated during the oxidation process or already present in solution, could inactivate the ruthenium catalyst, these authors added CH 3 CN to the solvent mixture to disrupt the insoluble low-valent ruthenium-carboxylate complexes and reactivate the catalytic cycle. With the new solvent system, CCl 4 /CH 3 CN/H 2 O (2:2:3), the effective catalytic oxidation of a variety of organic compounds was carried out in the presence of sodium metaperiodate (4.1 equiv.) and ruthenium trichloride hydrate (2.2 mol%). Since then these experimental conditions are known as -Sharpless conditions‖ and have been used for the oxidation of a range of functional groups [20][21][22][23][24][25][26][27][28][29][30][31][32]. For example, these are often the preferred conditions for cleavage of electron-poor C-C double bonds when the two-step process using osmium tetroxide (diol formation and successive diol cleavage) fails. However, the subsequent use of RuO 4 in organic synthesis was hampered by the perception that it was too a strong oxidant to be also selective and useful for oxidative transformations when used with multifunctional molecules. As new evidence about the reactivity of RuO 4 grew up, this idea proved wrong in several instances. Although a number of researchers have contributed to the advance of the knowledge about the RuO 4 chemistry, it is thanks to the systematic studies of a few research groups that effective oxidative protocols have been developed and are now increasingly employed in synthesis.
One of the most known, and employed, reaction catalyzed by RuO 4 is the oxidative cleavage of carbon-carbon double bonds. Since the seminal contribution by Sharpless and co-workers [19], new protocols have been developed [33][34][35][36] and the oxidative cleavage of olefins, even stopping the process at the aldehyde stage, is now feasible [37]. A related oxidative cleavage of terminal and internal alkynes [38][39][40] was developed as well, to give carboxylic acids or ketones [41].
The ruthenium tetroxide dihydroxylation of alkenes has been the subject of various improvements in the last twenty years. Rather surprisingly, since the first report on the cis-dihydroxylation of (E)and (Z)-cyclododecene by Sharpless and Akashy [42] (Scheme 1), this process has long been neglected probably due to the poor yields and the comment of these authors about the process that they considered -not a practical route to diols‖, as well as to the great attention devoted to the analogous osmium tetroxide-catalyzed process.   In 1993 the group of Piccialli and Sica employed stoichiometric amounts of RuO 4 to oxidise a range of steroidal alkenes [43,44] and dienes [45] demonstrating for the first time that good yields of syn-diols could be obtained (Scheme 1), and therefore that the behaviour of this oxide resembled that of OsO 4 more than previously believed. Notably, referring to these studies, the change of solvent used in the process from acetone-water to CCl 4 resulted in the switch of the reaction products from α-ketols, obtained in the former solvent mixture, to 1,2-diols. Indeed, in most cases, the oxidative behaviour of RuO 4 is strongly affected by the employed solvent. In the course of these studies Piccialli and co-workers were able to isolate for the first time the ruthenium (VI) diester intermediate [46] (see later for a more detailed discussion), formed by reaction of RuO 4 with two molecules of 7-dehydrocholesteryl acetate.
Subsequently Shing and co-workers [47][48][49] rendered the dihydroxylation process catalytic and coined the term -flash dihydroxylation‖ for this transformation due to the very short times required (Scheme 1). Since this contribution, the Shing's protocol has been employed in several instances. More recently Plietker and co-workers were able to further improve this transformation conducting the   Accounts of some aspects of the RuO 4 chemistry have previously been published [75][76][77][78] but no comprehensive review has been published in the last years. In the present account we report an up-to-date picture of the RuO 4 chemistry covering the literature in the period 2006-2013, with a special focus on the oxidative chemistry of alkenes and polyenes, by also discussing some aspects of the relevant processes not fully dealt with previously. Mechanistic aspects of the RuO 4 -mediated transformations have been reported in the previous Plietker's review [71] and they will not be further discussed here if not specifically required. New promising transformations, such as the oxidative spiroketalization of some -hydroxy-THFs [79] and a few other interesting, though isolated, results will be reported as well, to give an as clearer as possible picture of the ruthenium tetroxide reactivity. Our aim is to stimulate further interest in the RuO 4 chemistry so that further studies, and hopefully new progresses, could result.

Diastereoselective Dihydroxylation of Alkenes and Tandem RCM/ Oxidation or CM/Oxidation Processes
The first examples of diastereoselective dihydroxylation of olefins catalyzed by RuO 4 were reported in 1999 by Lee and co-workers [73]. Oxidation of enoyl derivatives of the Oppolzer's camphorsultam auxiliary 1 (Scheme 2), using the Shing's dihydroxylation protocol [48], gave good yields of diols and an up to 9:1 selectivity was observed. The sense of diastereoselectivity was the same observed in the analogous OsO 4 -catalyzed process. An opposite sense of diastereoselectivity was observed with the related sultam 2, but a poorer ca 6:4 selectivity was generally observed.

Scheme 2.
Examples of diastereoselective dihydroxylation of αβ-unsaturated carbonyl compounds (major diastereomers shown) [73].  More recently, Neisius and Plietker have carried out a thorough investigation of the diastereoselective dihydroxylation of olefins developing an auxiliary-based diasteroselective sequential cross metathesis(CM)/dihydroxylation protocol [74] (Scheme 3). It is based on the concept of sequential catalysis: the use of a single catalytic source to mediate two or more different sequential reactions. Initially, the dihydroxylation of αβ-unsaturated corboxamides, using various enantiopure oxazolidinones as chiral auxiliaries, was addressed. Importantly, a reversal -facial selectivity was observed compared to the Oppolzer's camphorsultam-based dihydroxylation previously reported Lee and co-workers [73], allowing the access to diols of the opposite enantiomeric series. Scheme 3. Sequential CM/dihydroxylation developed by Neisius and Plietker [74]. Yields were good, but the desired products were obtained with moderate diastereoselectivities. Better results were obtained with a new, ad hoc synthesized, camphor-derived sulfamidate auxiliary 3 (Scheme 3) that gave diols in good yields and the desired opposite sense of stereoinduction. In this sense the new auxiliary could be considered a -pseudoenantiomeric camphorsultam‖. A comparison with the results obtained by the same group on a range of substrates, using the Oppolzer's sultam auxiliary, proved that the new developed auxiliary gave higher diatereolectivities (d.r. up to 12:1; best d.r. with the Oppolzer's sultam auxiliary 9:1).
Next, the sequential CM/dihydroxylation protocol was addressed. The use of various catalysts showed that the highest catalytic activity in the CM process was displayed by the Hoveida-Grubbs II complex 4 (Scheme 4) that, importantly, was also active as a ruthenium source in the subsequent dihydroxylation step. An investigation of the influence of some additives in this step showed that the addition of Bu 4 NIO 4 in acetone allowed the obtaining of diols in good yields though with moderate diastereselectivity. The developed whole catalytic sequence was shown to be broadly applicable and the selectivities obtained in the dihydroxylation step significantly improved in the final methanolysis step. Overall, the diols were obtained with enantiomeric excesses in the range 91%-99%. The synthesis of both the enantiomers of anthopleurine, an alarm pheromone isolated from the sea anemone Anthopleura elegantissima (Scheme 4), was carried out using the new protocol. This synthesis also highlights the whole developed CM/dihydroxylation sequence.
Independently, Blechert and co-workers [80] developed related Ru-mediated sequential RCM/dihydroxylation and CM/dihydroxylation protocols using Grubbs I and Hoveyda-Grubbs I precatalysts, respectively. The addition of a 10-15 mol% amount of YbCl 3 •6H 2 O was required for the process. Selected examples are shown in Scheme 5. This represents the first use of a Ru-carbene species as a source of RuO 4 in the dihydroxylation of alkenes.
Similarly, shortly after the Blechert's report, Snapper and co-workers [81] developed two ruthenium-catalyzed protocols consisting of a RCM or CM step followed by either a Ru-catalyzed dihydroxylation or a Ru-catalyzed α-ketohydroxylation, generally using a 5 mol% of Grubbs II pre-catalyst, under Plietker's conditions. Selected examples of such processes are shown in Scheme 6. Yields for the RCM/dihydroxylation process were in the range 63%-81% and five-, six-, and seven membered diols could be obtained. The reaction displayed high diastereoselectivity when a nearby stereocenter was present. The CM/dihydroxylation process proceeded with 42%-77% yields and could be performed in a variety of solvents. Even hindered diols, obtained from trisubstituted olefins, could be accessed in good yields with this process. The tandem RCM/α-ketohydroxylation process gave cyclic α-ketols in 42%-61% yields. In some cases a 10 mol% amount of Grubbs II catalyst was required. The CM/α-ketohydroxylation sequence proceeded in 49%-76% yields but the regioselectivity of the oxidation step was generally low. Scheme 4. Synthesis of both the enantiomers of anthopleurine by sequential Ru-catalyzed CM/dihydroxylation [74]. The synthetic potential of the above RCM/dihydroxylation sequence for the synthesis of functionalized five to seven-membered rings is evident. Recently, for example, it has been used in the synthesis of some polyhydroxylated quinolizidines [82] (Scheme 7). Starting from the bis-allyl compound 5, the expected bicyclic diol was obtained in 69% yield as a mixture of the diastereomers 6 and 7 (6/7, 1:4.3). Since amines are known to deactivate the catalyst in olefin methatesis, the RCM step was accomplished in the presence of TFA that converts the amine into the TFA salt in situ. Interestingly, the analogous OsO 4 -catalyzed dihydroxylation of the first-formed olefin gave a reversed ratio of the two diastereomers (6/7, 3.5:1). Similarly, the related acryloyl substrate 8 gave the desired diol 9/10 in a good overall yield (74%) but poor diastereoselectivity (9/10, 1:1.4). In this case no TFA was require for the RCM step.

Synthetic Applications of the Ru-Catalyzed Dihydroxylation of Olefins
Although novel protocols for the dihydroxylation of olefins have been developed over recent years [77], the OsO 4 -catalyzed process is still the most used for this transformation and its asymmetric version is one of the most important processes ever developed in synthesis [83]. However, sometimes this route is not effective whereas the related process catalyzed by RuO 4 is successfully employed. Some synthetic application of the latter process are presented in this section. A notable application of the RuO 4 -catalyzed dihydroxylation of alkenes has been reported by Plietker and co-workers [84]. In particular, a synthetic strategy was developed that allowed to obtain a small carbohydrate library based on the pH dependence of three Ru-catalyzed processes: the dehydrogenation of alcohols, the oxidative cleavage of olefins and the dihydroxylation of olefins (Schemes 8-10). By suitably tuning the pH value of the medium, substituted δ-hydroxyalkenes 11 could be driven towards to two different oxidative routes: an oxidative C=C fragmentation/cyclization sequence (Scheme 9) or a dehydrogenation/dihydroxylation/cyclization sequence (Scheme 10). Under slightly acidic pH conditions (pH = 4-6) the stable species is RuO 4 that causes the fragmentation of the C=C bond and the resulting aldehydes spontaneously cyclize to lactols that are eventually acetylated to give compounds 12 (Scheme 9). A slightly modified Yang's protocol [37] was used for this transformation. Under these conditions the alcohol oxidation is slow and this functionality survives and is trapped into the lactol. On the other hand, under slightly basic conditions the stable species is the perruthenate ion that selectively oxidize the alcohol function in the same starting materials 11 to give the unsaturated aldehydes 13 (Scheme 10). Acidification of this reaction mixture to pH < 4 in situ generates RuO 4 from RuO 4 − , which dihydroxylates the olefin function and eventually gives the undegraded acetylated lactols 14, after acetylation. Although the RuCl 3 /NaBrO 3 system at pH 10 proved successful to oxidize the alcohol function in the latter sequence, it was found that the protocol developed by Yamaguchi and Mizuno [85], using molecular oxygen and the supported ruthenium catalyst RuCl 3 /Al 2 O 3 , in ethyl acetate at 80 °C, was the best method (Scheme 10). The dihydroxylation protocol developed by Plietker and co-workers [51] has been successfully applied in various instances. For example, the dihydroxylation of glycals and 2,3-unsaturated monoand disaccharides [86] (Scheme 11) gave sugar 1,2-or 2,3-diols, respectively, in excellent yields and stereoselectivity. Common protecting groups used in the protection of carbohydrates such as acetyl, benzoyl, pivaloyl, TBDPS, benzylidene and isopropylidene, and even the potentially RuO 4 -oxidable benzyl group, are stable under the reaction conditions. The stereoselectivity observed is explained in all cases by the syn attack of RuO 4 from the less hindered face of the olefin.
Another application of the RuO 4 -catalyzed dihydroxylation is found in the synthesis of a fused oxa-aza spiro sugar, a glucose-tethered isofagomine analogue designed for glycosidases inhibition activity studies [87]. Diastereoselective dihydroxylation of spiro olefin 15 (Scheme 12) failed under various OsO 4 -catalyzed dihydroxylation conditions as well as using m-CPBA and H 2 O 2 /HCO 2 H systems whereas the desired product 16 was obtained in 62% yield by the Ru-mediated process and acetylation. Scheme 11. Stereoselective dihydroxylation of glycals and a 2,3-unsaturated disaccharide [86]. .
During the synthesis of the C94-C104 fragment of symbiodinolide, a marine natural product [88], the dihydroxylation of the electron-deficient enone 17 (Scheme 13) was required. While the OsO 4 − dihydroxylation procedure failed, the desired product 18 was obtained in good yields (73%) with the RuCl 3 /NaIO 4 system in the presence of ZnCl 2 as Lewis acid. Interestingly, the process conducted under Plietker's standard conditions, using CeCl 3 , gave lower yields (51%). The preparation of an advanced intermediate in the total synthesis of lactonamycin and lactonamycin Z [90] required the dihydroxylation of the electron-poor C-C double bond in antraquinone 20 (Scheme 15). This was accomplished under Shing's [48] modified conditions in good yields. Notably, the potentially reactive alkyne functionality was unaffected probably as a consequence of its shielding caused by the TBDPS protecting group.

Scheme 15.
A dihydroxylation step during the synthesis of lactonamycin and lactonamycin Z [90]. During the synthesis of the hikosamine core of the antibiotic hikizimycin [91], the transformation of compound 21 into the hemiacetal 23 was required (Scheme 16). However, the the crucial double bond dihydroxylation in 21, with catalytic OsO 4 , failed to give the desired diol (<5% conversion). A good conversion required the unattractive use of stoichiometric amounts of OsO 4 in the presence of TMEDA and successive hydrolysis of the osmate ester. In addition, successive synthetic steps carried out on the dihydroxylation product were equally difficult. The problem was overcome by the RuO 4 -catalyzed dihydroxylation of the aldehyde 22, where FeCl 2 •4H 2 O turned out to be the best Lewis acid for the conversion. Under these conditions the first-formed diol spontaneously cyclized to the required pyranose ring of 23. Notably, the aldehyde function in 22 survived to the dihydroxylation conditions.
An application of the Ru-catalyzed protocol using catalytic amounts of a Bronstedt acid [50] is found in the dihydroxylation of pyrazol-5-one 24 [92] (Scheme 17) which gave aldehyde 25 in 44% yield after diol cleavage.
In a recent synthesis of 4α-hydroxy-7-dehydrocholesterol by Ilida and co-workers [93] the stereoselective dihydroxylation of the  4 double bond of cholest-4-en-3β-yl acetate 26 was required (Scheme 18). While OsO 4 and KMnO 4 failed to give the desired product, the RuO 4 -catalyzed process was successful giving the 4α,5α-diol in a 72% yield and in a fast way. This compound had previously been synthesized in our group (Scheme 1) [43] using stoichiometric amounts of RuO 4 in CCl 4 . Interestingly, though the experimental conditions used by the Japanese group differed, the yield of 27 was in perfect agreement with that reported by us. This is a further confirmation of the importance of the RuO 4 -mediated dihydroxylation as a valuable alternative to other methods.

Scheme 16.
A highly diastereoselective dihydroxylation step during the synthesis of the core of hikizimycin [91].

The Ruthenium Diester Intermediates in the Oxidation of Alkenes
In this section the current knowledge of ruthenate ester intermediates involved in the interaction of RuO 4 and olefins is summarized. Kinetic studies performed by Lee and Spitzer in 1976 [94] had suggested that the RuO 4 -mediated cleavage of carbon-carbon double bonds could proceed through the formation of a cyclic ruthenium (VI) diester intermediate similar to that involved in the reaction of alkenes with OsO 4 . However, it was not until 1994 that the first ruthenium(VI) diester intermediate in the dihydroxylation of an alkene could be isolated [46]. In particular, Piccialli and Sica carried out the oxidation of 7-dehydrocholesteryl acetate with stoichiometric amounts of RuO 4 at −50 °C, in acetone water (1:1). The reaction led to a mixture of the 1,2-diol and the corresponding α-ketol (Scheme 19) along with a precipitate that was then disclosed to be the ruthenium(VI) diester 28 (Scheme 20), analogous to the osmate ester intermediate of the second cycle of the osmium tetroxide-catalyzed asymmetric dihydroxylation of olefins [83]. A more in-depth look to this process seems appropriate here since no other example of this type of substance has been reported ever since and previous discussions of this topic were rather incomplete. The use of stoichiometic amounts of RuO 4 as well as both the nature of the substrate and the solvent mixture employed, all played a key role for the isolation of this substance. Indeed, the steroid substrate was soluble in the polar solvent mixture used for this reaction but when two steroidal units bonded to RuO 4 , a rather insoluble species resulted. Hydrolytic, or oxidative, decomposition of this species took place for the most part though a little amount (6%) of it precipitated subtracting itself to the further decomposition. Compound 28 proved sufficiently stable to be isolated and purified by HPLC in hexane-EtOAc mixtures and its NMR characterization could be accomplished in CDCl 3 solutions.
In a successive study, [95] a careful investigation of this process was carried out and further evidence was gained. In particular, it was observed that three distinct species (28)(29)(30)Scheme 20) were produced during the oxidation of 7-dehydrocholesteryl acetate and that the most abundant one (>95%) was the new compound 29. This species underwent isomerization to two other isomeric ruthenium (VI) species, namely previously isolated 28, and the new species 30, under mild acidic conditions (SiO 2 /CDCl 3 ). The isomerization process could be monitored by 1 H-NMR starting from pure samples (HPLC) of the three isomers and the picture shown in Scheme 20 resulted. Eventually, after several hours the mixture of 28 and 30 hydrolysed to the sole 1,2-diol product. In addition, chromatographic (TLC), and 1 H-and 13 C-NMR features of 28 and 30 proved strictly similar to those displayed by their analogous osmium (VI) diesters synthesized for comparison. These osmate esters showed no tendency to convert one another a fact that testimonies the different stability of these related species. In addition, no osmate ester corresponding to 29 was obtained when 7-dehydrochoelsteryl acetate was reacted with OsO 4 .
The behaviour of cholesteryl acetate was then studied under the same oxidative conditions [95]. A similar precipitate was obtained though in a smaller 1% amount. NMR evidence clearly indicated that it was composed of a 1:4 mixture of ruthenium diesters similar to 29 (major isomer) and 28 (minor isomer). The most abundant compound could be purified by HPLC and studied in pure form. It displayed a more pronounced instability compared with its analogue 29 derived from 7-dehydrocholesteryl acetate. Presumably, this can be attributed to the  7 double bond present in 29 that for some reason may play a stabilizing role. Further studies on this point, aimed at the comprehension of the stability and properties of these materials, would be suitable. As previously pointed out [72], we believe that the labile nature of the ruthenate esters of the above type, or the first-formed 1:1 species derived by cycloaddition of RuO 4 and one molecule of the alkene, may be responsible for some of the reactions peculiar to RuO 4 that do not have counterpart with OsO 4 such as formation of variable amounts of trans-THF in the oxidative cyclization of 1,5-dienes [52], formation of trans-THP from 1,6-dienes [54] and the oxidative polycyclization of polyenes [57][58][59][60] (for a detailed discussion on this point see reference [72] In a related study, conducted in our group, NMR evidence was collected on the involvement of a similar cyclic ruthenium diester species 31 (Scheme 21), both in the oxidative cleavage and the ketohydroxylation of α-pinene [69]. Interestingly, once again the change in the solvent used for the reaction channelled the process towards two different oxidative routes. Cleavage of the olefin was observed in CCl 4 solutions leading to ketoaldehyde 32 as the sole product whereas ketol 33 was obtained in acetone-water (2:1). NMR data collected for both processes monitored by 1 H-NMR indicated that the same intermediate was involved but, in this case, it was too unstable and could not be isolated. However, it could be seen to migrate without decomposition on silica TLC in hexane-acetate mixtures and had the very same R f value of the corresponding, stable, osmate ester, the structure of which was secured by X-ray analysis. Once again, as observed for the ruthenium(VI) diesters of 7-dehydrocholesteryl acetate, the ruthenium and osmium diesters of α-pinene showed strictly similar 1 H-NMR features as well.

Scheme 21.
Oxidation of α-pinene with RuO 4 [69]. As far as this author knows, no other experimental evidence of the intermediate of the oxidation of alkenes with RuO 4 have appeared in the literature successive to these studies, but theoretical studies were independently conducted by Strassner [96] and Frenking [97]. In both cases a [3+2] mechanism was shown to be favourite over the [2+2] mechanism and the former seems to have been definitively accepted as the operating route.
Related Ru(III) species, supposed to be the intermediates of novel Ru-catalyzed alkene cis-dihydroxylation and alkene cleavage protocols were more recently isolated when using the cis-dioxoruthenium (VI) complex 34 (Scheme 22) as the dihydroxylating species [98]. The collected evidence indicated that both processes involve the direct interaction of the two oxo ligands of Ru with the C=C bond, with formation of [3+2] cyloadducts. The cycloadducts with cyclooctene (Scheme 22) and trans-β-methylstirene were isolated and characterized by X-ray crystallography. Though in this case no RuO 4 is involved, once again a cycloaddition mechanism similar to that working for RuO 4 seems to be operative.

Oxidative Cyclization of Dienes and Polyenes
The  [55,56] is peculiar to ruthenium tetroxide and a similar process is not known for other oxo-species. The RuO 4 -catalyzed oxidative mono-cyclization of 1,n-dienes has previously been reviewed [72]. Recent developments in this fields, mostly concerning the OsO 4 chemistry, have been summarized in a review by Pilgrim and Donohoe [100] where a comparative picture of the oxidative cyclizations of 1,5-and 1,6-dienes, and related processes mediated by various metal oxo-species, including RuO 4 , has been presented.
Kirchner et al. [101] carried out density functional theory studies to investigate the mechanism of the RuO 4 -mediated oxidative cyclization of 1,5-and 1,6-dienes. Considering an operating [3+2] cycloaddition mechanism, they concluded that the transition structure for the formation of the cis-THF ring was more stable by about 40 kJ/mol than the trans-THF-forming transition structure. In the formation of tetrahydropyran compounds from 1,6-dienes, a transition structure for the formation of the trans-THP was less that 4 kJ/mol more stable than the transition structure leading to the cis-THP isomer. Their conclusions were in agreement with observed experimental selectivities.
As a more recent contribution in this field Stark and co-workers investigated the mono-cyclization of a range of polyenes, namely 1,5,9-trienes, 1,5,9,12-tetraenes and squalene [102]. Selected examples are reported in Scheme 23. Various protected farnesol-derived substrates were subjected to the protocol using catalytic RuCl 3 and NaIO 4 on wet silica, to give mono-THF diol products in moderate to good yields. Yields are generally good if calculated including the overoxidized ketol products. The higher yield of the THF diol derived from triene 36 could be attributed to the survival of the terminal electron-deficient double bond. Non-terpenoid 1,5,9-trienes gave lower yields (21%-42%) of similar mono-THFs. Tetraenes gave mono-THF products in a 19%-51% yield. The yield and the position selectivity depends on the electronic properties of the substrate (see for example the oxidation of 37) and possibly is influenced by steric factors. Squalene led to poor yields of the two isomeric mono-THF compounds 38 and 39 possibly due to the growing side reactions triggered by the presence of six double bonds in this compound.

Scheme 23.
Oxidative monocyclization of polyenes. Overall yields including overoxidation products are shown in parentheses [102]. The RuO 4 -catalyzed oxidative polycyclization (OP) of polyenes characterized by a repetitive 1,5-diene structural motif is a stereoselective cascade process discovered some years ago in our laboratories [57][58][59][60]72]. Some representative isoprenoid polyenes such as farnesyl acetate, geranylgeranyl acetate and squalene, as well as unbranched linear polyenes, were transformed into bistris and penta-THF products by this process. The oxidation of squalene [57] is a notable example since it is transformed into the structurally complex penta-THF compound 40 (Scheme 24) in a remarkable 50% yield in a straightforward and fast way. The process has been scaled up and multigram amounts of the product could be obtained [103]. More recently we tested the reactivity of the C S -symmetric tetraene digeranyl 41 (Scheme 25) [104]. We were interested to collect further evidence on the steroselectivity of the process and in particular to evaluate the effect of the tail-to-tail fusion of the central isoprene units in digeranyl, on the second cyclization step. The oxidation of 41 led to the two isomeric tris-THF products 42 and 43 along with the stereostructurally related truncated bis-THF lactone 44 in a 29% overall yield. Interestingly, an unexpected stereochemical outcome was obtained as compared to the OP of all the other polyenes previously tested. While in previous instances the second cyclization step constantly led to a cis-THF ring, in this case a trans-THF ring was obtained in the second cyclization for all three compounds 42-44. It is to be noted that from a structural point of view, the exchange of the Me-10 and H-11 occurs on going from FA, GGA and squalene to digeranyl (Figure 2). This structural change likely triggers the formation of a trans-THF in the second cyclization step. An explanation of the observed stereoselectivity, based on previously proposed chelation/steric control models [60] operating in each cyclization step, is reported in Figures 3 and 4. In particular, the cis-selectivity of the first cyclization step can be explained through a [3+2] cycloaddition in the intact ruthenium bis-glycolate intermediate 45 (Figure 3) with the molecule assuming a chair-like conformation in the transition state. This type of cis-selective cyclization characterizes the oxidative cyclization of 1,5-dienes with permanganate [105,106], OsO 4 [107][108][109][110], RuO 4 [19,52,53,61] and perruthenate [111].  When referring to the transition state for the second cyclization step, the conformation 46 (Figure 4), leading to the closure of a cis-THF ring in the second cyclization step, is disfavoured due to steric interactions within the C(11)-Me/C(2)-Me and H ax -9/C(6)-grouping pairs. As a result, the alternative non-chelated arrangement 47, generated by cleavage of the C(2)O-Ru bond, is favoured leading to a trans-THF, through steric control.  The scarce stereoselectivity observed for the third cyclization step can be explained in a similar manner considering that the trans configuration of the second THF ring affects the course of the third cyclization. In particular, less severe steric repulsions in the TS for the third cyclization step result that render the cis-THF-forming step now more viable if compared to the analogous cyclization step for GGA and squalene and, as a consequence, both cis-and trans-THF rings can now be formed. On the other hand, formation of lactone 44, not observed previously, indicates that the hydrolysis of the ruthenate ester intermediate in part takes place after the second cyclization step thus stopping the process. Successive oxidation/cyclization events lead to the lactone formation.
An interesting point emerged from this study: the stereoselectivity of the second and third cyclization steps in the OP of digeranyl are affected by its alkyl substitution pattern that drives the cyclization steps successive to the first one.

Oxidative Polycyclization of Hydroxypolyenes
The above Ru-catalyzed oxidative polycyclization process is clearly related to the oxidative polycyclization of hydroxypolyenes catalyzed by CF 3 CO 2 ReO 3 [112][113][114] that allows formation of bis-or tris-THF products in a single step. Although the closure of up to three adjacent THF rings in hydroxypolyenes has generally been accomplished in a sequential manner [115][116][117], a single-step biscyclization (Scheme 26) [112,[118][119][120] or tris-cyclization (Scheme 27) [112,121] has been carried out in some instances. This multiple cyclization process is the evolution of the rhenium (VII) methodology developed by Kennedy and Tang [122] for the synthesis of THF alcohols, starting from alkenyl alcohols. The system CF 3 CO 2 ReO 3 /(CF 3 CO 2 ) 2 O, developed by McDonald and co-workers showed to be the best choice to induce the formation of two or three contiguous THF rings in a single step. This chemistry has mostly been applied to the synthesis of the poly-THF core of annonaceous acetogenin metabolites. However, no case of the Re(VII)-mediated formation of poly-tetrahydrofuran products with four or more adjacent THF rings has been reported.

Scheme 28.
Bis-cyclized (only the trans isomer is shown) and cleavage products by PCC-mediated oxidative cyclization [123]. It is worth highlighting some differences between the RuO 4 -catalyzed and the Re(VII)-mediated processes. While the Re(VII)-mediated process constantly gives a trans-THF in the first cyclization, a cis-THF is always obtained in the first cyclization in the Ru-catalyzed transformation (Scheme 25 and fig. 3). This is a direct consequence of the type of ester intermediate formed in the initial step. While the Re-mediated process needs an OH group in the structure to give a Re(VII) ester intermediate (RO-ReO 3 ), the Ru-mediated oxidation begins with a [3+2] cycloaddition of RuO 4 and a C-C double bond, leading to a ruthenium(VI) diester intermediate. As a consequence, a poly-tetrahydrofuran-diol product is obtained with RuO 4 , while a mono-, bis-or tris-tetrahydrofuran alcohol is obtained when a rhenium(VII) oxo-species is used.

Scheme 29.
Comparison of Re-and Ru-mediated oxidative polycyclization of a polyenol and a polyene, respectively.

Oxidation of Ethers
Ethers possessing a methyl or a methylene group adjacent to the oxygen are generally oxidized in good yields to esters by RuO 4 (Scheme 30) [17,[124][125][126]. This chemistry can be fruitfully used, for example, to convert benzyl protecting groups into benzoates (Scheme 30) [23] thus modifying the removal conditions of the former. On the contrary, few examples have been reported on the oxidation of ether methine carbons [127,128] in cyclic or acyclic ethers though the oxidative opening or the oxyfunctionalization of 2,5-disubstituted cyclic ethers would have synthetic value [129]. An interesting example of this type of transformation has been reported by Fuchs and co-workers [130] where acid-sensitive steroidal ethers were oxidized to hemiketals under new developed buffered conditions. (Scheme 31). This process has recently been used by the same group to synthesize 14, 16- A strictly similar chromyl acetate-mediated oxyfunctionalization process has been reported by the same group [132]. Chromyl acetate was used in catalytic amounts in the presence of periodic acid as primary oxidant to hydroxylate the C-14 position of the steroidal substrate 50 (Scheme 33). The authors postulate the intermediacy of a chromoylperiodate species that evolves to a peroxo intermediate which then adds to the C(14)-H bond.

Scheme 33.
Chromyl acetate catalyzed oxyfunctionalization [132]. A related ether oxidation process is represented by the oxidative cleavage of THF and THP alcohols (β-hydroxy ethers) to γand δ-lactones, respectively. Some examples of this type of RuO 4 -mediated transformation have been shown above (Scheme 25; see also Scheme 39 later). While this is generally a detrimental side-process in oxidative mono-and poly-cyclizations, it may have per se synthetic value since lactones of various sizes are structural motifs in many natural products.
Since the β-positioned hydroxyl group was shown to be essential for the process, it is likely that the process involves the preliminary formation of ruthenate ester 51 (Scheme 34). The tethered oxoruthenium appendage then participates to the oxidation of the angular methyne ether. These authors presume that the oxidation generates an intermediate diol compound 52, that is then oxidatively cleaved by RuO 4 itself. However, a concerted step can also be envisaged were a cyclic ruthenium (VI) ester is formed that then fragments, in accord with the mechanism proposed by Waegell and co-workers for the oxidation of 8-hydroxy-neoisocedranol oxide (Scheme 35) [135]. As far as this author knows, all the reported examples of this type of process involving RuO 4 are relevant to THF or THP rings flanked by tertiary alcohol functions. Scheme 34. Synthesis of ketolactones by oxidative cleavage of β-hydroxytetrahydrofurans [133,134].  .

6558
A similar chemistry is promoted by pyridinium chlorochromate (see for example Scheme 28) [123]. Baskaran and Chandrasekaran [136] used PCC to convert a range of THF-methanol compounds to γ-lactones. In this case, the process worked well with substrates possessing primary, secondary and tertiary alcohol moieties. Substrates possessing primary or secondary hydroxyl groups gave the products in moderate yields (52)(53)(54)(55)(56)(57)(58) whereas excellent yields (73%-98%) were obtained for those embodying tertiary alcohol functions. Synthetic applications of this process have been reported [59,104,[137][138][139][140][141]. In a more recent investigation, Roth and Stark [142] developed an improved procedure involving catalytic amount of PCC and periodic acid as co-oxidant. THF or THP rings flanked by tertiary alcohol groups were cleaved in excellent yields (Scheme 36). It is presumed that chlorochromate is first activated by reaction with periodic acid to form a mixed anhydride [143], that is more reactive as compared to PCC, in a manner similar to that proposed for the above chromyl acetate-catalyzed process.

Oxidative Spiroketalization
In a recent study carried out in our group, a new RuO 4 -catalysed tandem oxidative polycyclization/double oxidative spiroketalization process [79] was discovered, by conducting the oxidation of squalene under new conditions. This process allowed the one-step assembly of the new structurally complex polyether bis-spiroketals 53-56 characterized by unprecedented terminal tricyclic spiroketal moieties (Scheme 37). Contrary to the OP of squalene under previous conditions [57,59], in this case the process was not stereoselective. Only the first THF-forming step proceeds with the usual cis-selectivity [52,53,[57][58][59][60][61][62] whereas all the other THF rings were formed in a non-stereoselective manner with a cis or trans configuration. The reason of this behaviour is still unclear. The overall yields of these compounds was of ca. 5% but considering the seven consecutive cyclization steps involved, this is a remarkable result (65% per cyclization step) and hundred mg of these material could be obtained conducting the process on 122 mmol of squalene. Indeed this is the most complex transformation catalyzed by RuO 4 ever discovered. A mechanistic hypothesis explaining the formation of compound 53 is shown in Scheme 38. Interestingly, compounds 53-56 exhibited antitumor activity on HEY ovarian-derived cancer cell line and BT474 breast-derived cancer cell line paving the way to the investigation of a new class of cytotoxic substances. To further study the spiroketal-forming step involved into the process, mono-spiroketal 58 (Scheme 39) was treated with the RuCl 3 (cat)/NaIO 4 system under further optimised conditions. Bis-spiroketal 56 was obtained from mono-spiroketal 58 at 80% conversion along with a minor amount of lactone 59 derived from the cleavage of the terminal hydroxypropyl moiety. The two competing processes appear to involve the same ruthenium-containing intermediate 57. Interestingly, the spiroketalization process proceeds with retention of configuration at the newly-formed spiro-centre, as observed for the hydroxylation of epicedrane at C-8 under similar conditions [135]. The oxidative cleavage step may follow the mechanism proposed by Waegell and co-workers [135]. Although more detailed studies are to be carried out to probe the scope and limitations of this transformation, it may have synthetic value.

Scheme 38.
A mechanistic hypothesis explaining the formation of compound 53 [79]. Related studies conducted in our group showed that the same oxidative sproketalization could be accomplished by treating penta-THF 31 with pyridinium chlorochromate (Scheme 40) [144]. Compounds 60 and 61 were obtained in this case, though in a low 10% yield. The process proceeds with retention of configuration in this case too. Lactone 61 derived from the oxidative cleavage of the terminal hydroxypropyl side-chain in a manner similar to that shown above in the RuO 4 -mediated process (Scheme 39) and in the bis-cyclization of hydroxydienes with the same oxidant (Scheme 28). This reaction further highlights that RuO 4 and PCC show similar oxidizing behaviour a fact that may have mechanistic and theoretical implications. Scheme 40. PCC-mediated oxidative spiroketalization [144].

Some Unexpected Results
2-Azido-2-(hydroxymethyl)oxetanes 62 were transformed into acyclic nitriles 63 with loss of the alcohol carbon (Scheme 41) by reaction with RuCl 3 (cat.)/NaIO 4 under classical conditions [145]. The process proceeds with low yields but is interesting from a mechanistic point of view. The authors proposed (Scheme 42) the interaction between RuO 4 and both the alcohol hydroxyl and the N α atom of the azido group. The so formed five-membered, Ru-containing, ring then cleaves with expulsion of molecular nitrogen and formaldehyde. Eventually the opening of the oxetane ring follows with nitrile formation and regeneration of RuO 4 . As far as this author knows, this is the sole known example of the interaction of RuO 4 with the azide group. The ability of transition metals to coordinate azides [146] and cyclic 2-azidoalcohols [147] is known and the mechanism proposed seems plausible.

Scheme 41.
Cleavage of 2-azido-2-(hydroxymethyl)oxetanes with RuO 4 [145]. During the synthesis of melohenine B the cleavage of a tetrasubstituted double bond in eburnamonine 64 was required (Scheme 43) [148]. The catalytic system RuCl 3 /NaIO 4 , using excess periodate (12 equiv.), led to the desired C2/C7 cleavage but the concomitant oxidation of the pyperidine ring occurred with formation of an unexpected α-ketoamide functionality in the product 65. A low number of equivalents of periodate gave a complex mixture of products. The structure of 65 was secured by X-ray analysis. While the oxidation of the carbon adjacent to nitrogen is well known [76 and references therein], this is an unusual result. The authors do not propose any mechanism for this transformation though the formation of a C-18/C-19 unsaturated intermediate, could be involved.
In view of the RuO 4 reactivity this result is difficult to be explained. It is interesting to note that the allylic oxidation occurs with sterically hindered, tetrasubstituted,  8 and  8 (14) double bonds. No other example of this type of reactivity has later been reported. However, ruthenium-catalyzed allylic oxidations of olefins to enones is a known transformation and various ruthenium reagents have been used [151]. For example, the use of ruthenium (III) chloride, in conjunction with tert-butyl hydroperoxide as stoichiometric oxidant, has been reported [151].

Oxidation of Alkanes
The oxidation of alkanes is a process of great industrial importance as well as biological relevance [152]. For the sake of completeness we will briefly mention this type of transformation here. The inherent non reactive nature of unactivated hydrocarbons makes it necessary to use strong oxidizing reagents to accomplish these oxidations and ruthenium tetroxide is one of these species. The RuO 4 -catalyzed oxidation of alkanes has mostly been independently addressed by Bakke [153][154][155][156][157][158] and Waegell [159][160][161] using the classical RuCl 3 (cat)/NaIO 4 system. The order of reactivity in these transformations is known to be CH>CH 2 >CH 3 and the oxidation takes preferentially place at the less hindered tertiary C-H bonds. On the other hand, the oxidation of various alkanes containing the cyclopropane ring showed that the oxidation of methylenes α to the cyclopropyl group takes place to give ketones [162]. When such a position is tertiary, and is part of a ring, cleavage of the ring occurs possibly through a hydroxylation/dehydration/cleavage sequence. Interestingly, in no case the cyclopropyl group is affected and it simply plays an activating role in these oxidations. Following the independent mechanistic proposals by Bakke and Waegell, Drees and Strassner [163] carried out theoretical studies that substantiated a [3+2] mechanism for the alkane oxidations that was in good agreement with experimental Bakke's results.
The most recent contribution on this topic is represented by the RuO 4 -catalysed selective hydroxylation of tertiary C-H bonds in a range of variously functionalised substances, developed by McNeill and Du Bois (Scheme 45) [164]. Although NaIO 4 had previously been reported to be the best reoxidant for the alkane oxidations [135], these authors developed a new procedure employing catalytic amounts of RuCl 3 and KBrO 3 as primary oxidant, in the presence of catalytic pyridine. The yields of the process were generally higher than 50%, with best yields obtained by using a 1:1 mixture of H 2 O/MeCN as solvent. The new protocol was tested for the oxidation of some substrates, in comparison with the protocols previously employed by Bakke and Waegell. A substantial improvement was observed and the presence of pyridine was also shown to be crucial for the process as lower yields resulted in its absence. Functional groups such as ester, epoxide, sulfone, unprotected tertiary alcohols, carbamate and sulfamate, were tolerant to these conditions. As previously observed, when multiple tertiary positions competed for oxidation, the hydroxylation occurred at the most electron-rich C-H bond that is at the site as remote as possible from the electron-withdrawing group. For example, a >20:1 ratio of isomeric alcohols, in favour of 70, was obtained on oxidation of 69.
More recently, Mayer and co-workers have shown that osmium tetroxide can oxidize alkanes both under stoichiometric and catalytic conditions, using periodate as co-oxidant [165]. The oxidation of a small number of alkanes was conducted at 85 °C and pH = 12.1 for 7 days. Isobutane gave tert-butyl alcohol, cyclopentane gave glutarate, cyclohexane gave a mixture of adipate and succinate, cis-decalin gave cis-9-decalinol. Although a radical mechanism could not be firmly ruled out [166], the collected data were in agreement with a concerted [3+2] mechanism (Scheme 46) similar to that proposed for related RuO 4 alkane oxidations and the proposed mechanism for H 2 oxidation by OsO 4 [167] in the presence of hydroxide. The reactive species is thought to be OsO 4 (OH) − . Scheme 45. Ruthenium-catalyzed tertiary C-H bonds hydroxylation [164]. .

Scheme 46.
Proposed mechanism for the osmium tetroxide oxidation of alkanes [165].  [169][170][171][172] are well-known to oxidize alkanes. The above examples and literature data indicate that the RuO 4 -catalyzed process has the greatest synthetic potential both for regioselectivity and effectiveness reasons.

An Overview of the Previous Work
Tetrapropylammonium perruthenate was introduced by Griffith and Ley in 1987 [173]. Since then it has been used in catalytic amounts, in combination with N-methylmorpholine N-oxide (NMO) as co-oxidant, for the mild oxidation of a wide range of primary and secondary alcohols to carbonyl compounds [174][175][176]. Many functional and protecting groups are unaffected under these conditions. More recently, NaOCl has been employed as co-oxidant [177,178] for the oxidation of secondary alcohols under biphasic (methyl tert-butyl ether/water or EtOAc/water mixtures) and buffered conditions (pH 9.5). The TPAP/O 2 pair has also been used [75,[179][180][181] as a green oxidizing system and many efforts have been directed towards the development of effective aerobic oxidations. A polymer-supported perruthenate (PSP) system was developed by Ley and co-workers [181,182] and used to oxidize alcohols using oxygen as a stoichiometric oxidant [183]. However, it was later shown that this PSP reagent was difficult to recycle and other supports were investigated by the same group.
These studies led to develop a more efficient heterogeneous TPAP-based catalyst [184] by immobilizing perruthenate on the internal surface of MCM-41, a mesoporous siliceous material, that was once again used to cleanly oxidize alcohols with molecular oxygen. Similarly, Pagliaro and Ciriminna prepared an organic modified silica, referred to as ormosil, doped with TPAP, through the sol-gel process, that was used for the aerobic oxidation [185,186] of alcohols or using H 2 O 2 [187]. The same group [188] and others [189] developed aerobic alcohol oxidation procedures in supercritical CO 2 by using silica-supported ionic liquid doped with perruthenate. Recently, some aspects of the perruthenate chemistry, including PSP chemistry, has been reviewed by Pagliaro and co-workers [75,190].
The TPAP/NMO system has also been used to oxidize functional groups other than alcohols. Thus, secondary amines were oxidized to imines [191], N,N-disubstituted hydroxylamines to nitrones [192], 1,4-dihydropyridines to pyridines [193], 1,2,4-triazenes to triazoles [194], while pyrrolidinones could by obtained starting from aminoalcohols [195]. A protocol for the direct conversion of alkenes to carbonyl compounds via alkylborane intermediates was also developed [196]. TPAP was also used as a catalyst in an efficient isomerization of allylic alcohols into the corresponding saturated carbonyl compounds [197], in the presence of 2-undecanol as a sacrificial alcohol additive. In this case it was postulated that a Ru(III) species is generated from perruthenate by oxidation of the saturated alcohol, that then enters the catalytic cycle. In the present account we will essentially focus on some transformations, recently appeared in the literature, that lends themselves to interesting synthetic applications.

Scheme 47.
Selected examples of TPAP-catalyzed oxidative cyclization of 1,5-dienes [111]. In a related study Cheng and Stark [198] recently discovered that the TPAP(cat.)/NMO system can induce the oxidative cyclization of 5,6-dihydroxyalkenes to THF diols. Enatiomerically pure 5,6-dihydroxy olefins were cyclized to enantiomerically pure THF-diols in high diastero-and enantiopurity (d.r. >95:5; e.r. 88:12 to > 99:1) with complete stereochemical transfer. The yields were generally good and a range of substrates was screened. Some representative examples are shown in Scheme 48. Only double bonds suitably positioned to form a THF ring were reactive. In fact, cyclization of diene 71 demonstrates that formation of the THF ring is favoured over the THP ring that, in principle, could also be generated [54,63]. Scheme 48. TPAP-catalyzed oxidative cyclization of 5,6-dihydroxy olefins [198]. The above process is analogous to the osmium tetroxide-catalyzed oxidative cyclization of 5,6-dihydroxyalkenes discovered by Donohoe and Butterworth [199]. After various improvements carried out in the Donohoe's group [200,201], this methodology has become a valuable tool for the enantioselective construction of THF rings (Scheme 49). The synthesis of various biologically active natural products, such as the annonaceous acetogenins (+)-cis-solamin, (+)-cis-sylvaticin, and (+)-sylvaticin, (−)-neodysiherbaine [100], and more recently the ABC ring system of pectenotoxin-4 [202] (Scheme 50), has been accomplished by the same group. As for this latter target, the method allowed the one-pot construction of the bis-THF synthetic intermediate 72 through a cascade oxidative cyclization step, further disclosing the synthetic relevance of this methodology and expanding its applicability. The first cyclization delivers a diol system (73, Scheme 50) that is appropriately placed relative to the second double bond to allow the second cyclization to take place. It is not known weather this intermediate is actually formed or the entire process proceeds with translocation of the same osmium atom on to the newly generated diol. Scheme 49. OsO 4 -catalyzed oxidative cyclization of 5,6-dihydroxy olefins under improved Donohoe's conditions [199][200][201]. A similar process can be carried out with chromium trioxide and PCC. Discovered by Casida and coworkers [203] and later studied by Walba and Stoudt [204] it has rarely been used in synthesis probably due to the moderate yields (40%-50%). Corey and Ha [205] employed this process to obtain a chiral THF diol fragment to be used in the synthesis of venustatriol.
At the moment, the osmium-catalyzed process is the most effective one to induce the cyclization of 5,6-dihydroxyalkenes.

Other TPAP-Catalyzed Oxidations
Although TPAP is usually used to oxidize primary alcohols to aldehydes, Stark and co-workers have recently developed an efficient oxidation procedure for the direct conversion of primary alcohols into carboxylic acids using catalytic amounts of TPAP in the presence of NMO•H 2 O [206]. It was postulated that the latter plays a dual role: stabilization of the aldehyde hydrate intermediate while acting as a co-oxidant to regenerate the active Ru(VII) catalyst. For this purpose it was found that 10 equiv. of NMO•H 2 O were required. A range of primary alcohols were oxidized leading to carboxylic acids in good to excellent yields in short reaction times (Scheme 51). Several functionalities are unaffected and α and β-stereocentres remain intact as well.
Scheme 51. TPAP-catalyzed oxidation of primary alcohols to carboxylic acids [206].  The proposed mechanism is shown in scheme 52. The oxidation to the aldehyde intermediate proceeds in the usual way [71]. The aldehyde is then hydrated and the hydrate form is stabilized by interaction with NMO to give species 74. The latter is engaged into a Ru(VII) ester-formation step with perruthenate. Hydrogen transfer to the oxo-ruthenium moiety then follows to deliver the carboxylic acid.

Scheme 52.
Proposed mechanism for the TPAP-catalyzed oxidation of primary alcohols to carboxylic acids [206].

OH -
The same oxidizing system was employed by Stark and co-workers to accomplish the direct oxidative cleavage of 1,2-diols to carboxylic acids or diacids [207]. Previously the TPAP-catalyzed oxidative cleavage of vic-diols to dialdehydes had been observed in some instances [208]. Since normally the above transformation requires two successive oxidizing steps (oxidative cleavage of the 1,2-diol and aldehyde oxidation), the added value of this method resides in the one-step accomplishment of the transformation. Selected examples of the new transformation are shown in Scheme 53. Some of the products were isolated as methyl esters. Scheme 53. TPAP-catalyzed oxidative cleavage of 1,2-diols to carboxylic (di)acids [207]. Recently, a unique oxidation/isomerisation of vinylidenecyclopropanes to dimethylenecyclopropanes using the system TPAP(cat.)/NMO has been discovered [209] (Scheme 54). The process proceeds with moderate to good yields. Other oxidants tested for the transformation gave complex mixtures or lower yields. Optimization of the process showed that chloroform or chloroform/CH 2 Cl 2 mixtures were the best solvents at low temperature. The process works well for various gem-aryl-disubstituted cyclopropanes. The proposed mechanism is shown in Scheme 55. The sequence begins with the usual ester formation. Hydrogen transfer to the oxo-ruthenium portion then induces the cyclopropane ring opening to give intermediate 75 that recyclizes to give the final product. The proposed mechanism also explains the formation of minor amounts of the E isomer. Scheme 54. Oxidation/isomerization of vinylidenecyclopropanes with TPAP(cat.)/NMO [209].

Conclusions
In conclusion, ruthenium tetroxide chemistry has further been developed in the last years. The most part of the recent work has been carried out on unsaturated substrates, and in particular on alkenes. Some processes have been satisfactorily improved. For example, RuO 4 is more and more emerging as a useful alternative to osmium tetroxide in the dihydroxylation of alkenes filling the lack of, or the insufficient, reactivity shown by the latter on some substrates. Most of the protecting groups used in organic synthesis are tolerant to the employed reaction conditions and stereogenic centres, even adjacent to the reacting functional group, are generally unaffected. The reactions are fast and the differential reactivity of various functional groups [71] allows for the selective oxidation of only one of the diverse functionalities present, even avoiding, in some cases, protection/deprotection steps. A major limitation of the ruthenium tetroxide chemistry is currently represented by the impossibility of using asymmetric versions of the reactions catalyzed by this oxidant due to the strong oxidizing power of RuO 4 that appears to be incompatible with the use of most of the known chiral ligands. Nonetheless, auxiliary-based diastereoselective alkene dihydroxylation procedures have been developed. On the other hand, perruthenate chemistry has also expanded further. New TPAP reactions have been discovered that enlarge the previously known TPAP reactivity. TPAP-catalyzed aerobic oxidations are a still developing research area and is presumable that further advances towards green processes will be realized in the future. An overview of some of important oxidative transformations mediated by other metal-oxo species, strictly related to RuO 4 oxidation processes, has also been presented.