Journal Description
Biomimetics
Biomimetics
is an international, peer-reviewed, open access journal on biomimicry and bionics, published monthly online by MDPI. The International Society of Bionic Engineering (ISBE) is affiliated with Biomimetics.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Engineering, Multidisciplinary) / CiteScore - Q2 (Biomedical Engineering)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 17.2 days after submission; acceptance to publication is undertaken in 3.6 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
Impact Factor:
4.5 (2022);
5-Year Impact Factor:
4.1 (2022)
Latest Articles
Biomimetic Materials for Skin Tissue Regeneration and Electronic Skin
Biomimetics 2024, 9(5), 278; https://doi.org/10.3390/biomimetics9050278 - 07 May 2024
Abstract
Biomimetic materials have become a promising alternative in the field of tissue engineering and regenerative medicine to address critical challenges in wound healing and skin regeneration. Skin-mimetic materials have enormous potential to improve wound healing outcomes and enable innovative diagnostic and sensor applications.
[...] Read more.
Biomimetic materials have become a promising alternative in the field of tissue engineering and regenerative medicine to address critical challenges in wound healing and skin regeneration. Skin-mimetic materials have enormous potential to improve wound healing outcomes and enable innovative diagnostic and sensor applications. Human skin, with its complex structure and diverse functions, serves as an excellent model for designing biomaterials. Creating effective wound coverings requires mimicking the unique extracellular matrix composition, mechanical properties, and biochemical cues. Additionally, integrating electronic functionality into these materials presents exciting possibilities for real-time monitoring, diagnostics, and personalized healthcare. This review examines biomimetic skin materials and their role in regenerative wound healing, as well as their integration with electronic skin technologies. It discusses recent advances, challenges, and future directions in this rapidly evolving field.
Full article
(This article belongs to the Special Issue Biomimicry and Functional Materials: 3rd Edition)
Open AccessArticle
Research on Economic Load Dispatch Problem of Microgrid Based on an Improved Pelican Optimization Algorithm
by
Yi Zhang and Haoxue Li
Biomimetics 2024, 9(5), 277; https://doi.org/10.3390/biomimetics9050277 - 04 May 2024
Abstract
This paper presents an improved pelican optimization algorithm (IPOA) to solve the economic load dispatch problem. The vertical crossover operator in the crisscross optimization algorithm is integrated to expand the diversity of the population in the local search phase. The optimal individual is
[...] Read more.
This paper presents an improved pelican optimization algorithm (IPOA) to solve the economic load dispatch problem. The vertical crossover operator in the crisscross optimization algorithm is integrated to expand the diversity of the population in the local search phase. The optimal individual is also introduced to enhance its ability to guide the whole population and add disturbance factors to enhance its ability to jump out of the local optimal. The dimensional variation strategy is adopted to improve the optimal individual and speed up the algorithm’s convergence. The results of the IPOA showed that coal consumption was reduced by 0.0292%, 2.7273%, and 3.6739%, respectively, when tested on 10, 40, and 80-dimensional thermal power plant units compared to POA. The IPOA can significantly reduce the fuel cost of power plants.
Full article
(This article belongs to the Special Issue Biomimicry for Optimization, Control, and Automation: 2nd Edition)
►▼
Show Figures
Figure 1
Open AccessArticle
Radiographic Study of Transcrestal Sinus Floor Elevation Using Osseodensification Technique with Graft Material: A Pilot Study
by
Khrystyna Sulyhan-Sulyhan, Javier Barberá-Millán, Carolina Larrazábal-Morón, Julián Espinosa-Giménez and María Dolores Gómez-Adrián
Biomimetics 2024, 9(5), 276; https://doi.org/10.3390/biomimetics9050276 - 04 May 2024
Abstract
This pilot study aimed to evaluate the level of implant success after transcrestal sinus floor elevation (tSFE) using the osseodensification technique (OD) combined with beta-tricalcium phosphate (β-TCP) by analyzing clinical and radiographic results. Moreover, the increase in bone height was analyzed immediately after
[...] Read more.
This pilot study aimed to evaluate the level of implant success after transcrestal sinus floor elevation (tSFE) using the osseodensification technique (OD) combined with beta-tricalcium phosphate (β-TCP) by analyzing clinical and radiographic results. Moreover, the increase in bone height was analyzed immediately after surgery, 3 months after, and before loading by taking standardized radiographic measurements. Thirteen patients, four males and nine females, with a mean age of 54.69 ± 5.86 years, requiring the placement of one implant in the upper posterior maxilla, with a residual bone height of <8 mm and a minimum bone width of 5 mm, participated in the study. The bone gain data was obtained using cone-beam computed tomography (CBCT) immediately after surgery and twelve months after the placement. The correlation between initial and final bone height with implant stability was also assessed. The results were analyzed using SPSS 23 software (p < 0.05). The results of the study indicated a 100% implant success rate after a follow-up period of twelve months. Preoperative main bone height was 5.70 ± 0.95 mm. The osseodensification technique allowed a significant increase of 6.65 ± 1.06 mm immediately after surgery. After a twelve-month follow-up, a graft material contraction of 0.90 ± 0.49 mm was observed. No correlation was observed between the bone height at the different times of the study and the primary stability of the implant. Considering the limitations of the size sample of this study, the osseodensification technique used for transcrestal sinus lift with the additional bone graft material (β-TCP) may provide a predictable elevation of the maxillary sinus floor, allowing simultaneous implant insertion with adequate stability irrespective of bone height limitations.
Full article
(This article belongs to the Special Issue Biomaterials in Bone Regeneration: Challenges to Guarantee Appropriate Biological Features 2.0)
►▼
Show Figures
Figure 1
Open AccessReview
Bioarchitectural Design of Bioactive Biopolymers: Structure–Function Paradigm for Diabetic Wound Healing
by
Shivam Sharma and Anil Kishen
Biomimetics 2024, 9(5), 275; https://doi.org/10.3390/biomimetics9050275 - 04 May 2024
Abstract
Chronic wounds such as diabetic ulcers are a major complication in diabetes caused by hyperglycemia, prolonged inflammation, high oxidative stress, and bacterial bioburden. Bioactive biopolymers have been found to have a biological response in wound tissue microenvironments and are used for developing advanced
[...] Read more.
Chronic wounds such as diabetic ulcers are a major complication in diabetes caused by hyperglycemia, prolonged inflammation, high oxidative stress, and bacterial bioburden. Bioactive biopolymers have been found to have a biological response in wound tissue microenvironments and are used for developing advanced tissue engineering strategies to enhance wound healing. These biopolymers possess innate bioactivity and are biodegradable, with favourable mechanical properties. However, their bioactivity is highly dependent on their structural properties, which need to be carefully considered while developing wound healing strategies. Biopolymers such as alginate, chitosan, hyaluronic acid, and collagen have previously been used in wound healing solutions but the modulation of structural/physico-chemical properties for differential bioactivity have not been the prime focus. Factors such as molecular weight, degree of polymerization, amino acid sequences, and hierarchical structures can have a spectrum of immunomodulatory, anti-bacterial, and anti-oxidant properties that could determine the fate of the wound. The current narrative review addresses the structure–function relationship in bioactive biopolymers for promoting healing in chronic wounds with emphasis on diabetic ulcers. This review highlights the need for characterization of the biopolymers under research while designing biomaterials to maximize the inherent bioactive potency for better tissue regeneration outcomes, especially in the context of diabetic ulcers.
Full article
(This article belongs to the Special Issue Functional Biomimetic Materials and Devices for Biomedical Applications: 3rd Edition)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Single Sequential Trajectory Optimization with Centroidal Dynamics and Whole-Body Kinematics for Vertical Jump of Humanoid Robot
by
Yaliang Liu, Xuechao Chen, Zhangguo Yu, Haoxiang Qi and Chuanku Yi
Biomimetics 2024, 9(5), 274; https://doi.org/10.3390/biomimetics9050274 - 02 May 2024
Abstract
High vertical jumping motion, which enables a humanoid robot to leap over obstacles, is a direct reflection of its extreme motion capabilities. This article proposes a single sequential kino-dynamic trajectory optimization method to solve the whole-body motion trajectory for high vertical jumping motion.
[...] Read more.
High vertical jumping motion, which enables a humanoid robot to leap over obstacles, is a direct reflection of its extreme motion capabilities. This article proposes a single sequential kino-dynamic trajectory optimization method to solve the whole-body motion trajectory for high vertical jumping motion. The trajectory optimization process is decomposed into two sequential optimization parts: optimization computation of centroidal dynamics and coherent whole-body kinematics. Both optimization problems converge on the common variables (the center of mass, momentum, and foot position) using cost functions while allowing for some tolerance in the consistency of the foot position. Additionally, complementarity conditions and a pre-defined contact sequence are implemented to constrain the contact force and foot position during the launching and flight phases. The whole-body trajectory, including the launching and flight phases, can be efficiently solved by a single sequential optimization, which is an efficient solution for the vertical jumping motion. Finally, the whole-body trajectory generated by the proposed optimized method is demonstrated on a real humanoid robot platform, and a vertical jumping motion of 0.5 m in height (foot lifting distance) is achieved.
Full article
(This article belongs to the Special Issue Bio-Inspired Locomotion and Manipulation of Legged Robot: 2nd Edition)
►▼
Show Figures
Figure 1
Open AccessReview
Recent Advances in Biomimetics for the Development of Bio-Inspired Prosthetic Limbs
by
Pavitra Varaganti and Soonmin Seo
Biomimetics 2024, 9(5), 273; https://doi.org/10.3390/biomimetics9050273 - 30 Apr 2024
Abstract
Recent advancements in biomimetics have spurred significant innovations in prosthetic limb development by leveraging the intricate designs and mechanisms found in nature. Biomimetics, also known as “nature-inspired engineering”, involves studying and emulating biological systems to address complex human challenges. This comprehensive review provides
[...] Read more.
Recent advancements in biomimetics have spurred significant innovations in prosthetic limb development by leveraging the intricate designs and mechanisms found in nature. Biomimetics, also known as “nature-inspired engineering”, involves studying and emulating biological systems to address complex human challenges. This comprehensive review provides insights into the latest trends in biomimetic prosthetics, focusing on leveraging knowledge from natural biomechanics, sensory feedback mechanisms, and control systems to closely mimic biological appendages. Highlighted breakthroughs include the integration of cutting-edge materials and manufacturing techniques such as 3D printing, facilitating seamless anatomical integration of prosthetic limbs. Additionally, the incorporation of neural interfaces and sensory feedback systems enhances control and movement, while technologies like 3D scanning enable personalized customization, optimizing comfort and functionality for individual users. Ongoing research efforts in biomimetics hold promise for further advancements, offering enhanced mobility and integration for individuals with limb loss or impairment. This review illuminates the dynamic landscape of biomimetic prosthetic technology, emphasizing its transformative potential in rehabilitation and assistive technologies. It envisions a future where prosthetic solutions seamlessly integrate with the human body, augmenting both mobility and quality of life.
Full article
Open AccessArticle
Efficient Inhibition of Deep Conversion of Partial Oxidation Products in C-H Bonds’ Functionalization Utilizing O2 via Relay Catalysis of Dual Metalloporphyrins on Surface of Hybrid Silica Possessing Capacity for Product Exclusion
by
Yu Zhang, Xiao-Ling Feng, Jia-Ye Ni, Bo Fu, Hai-Min Shen and Yuan-Bin She
Biomimetics 2024, 9(5), 272; https://doi.org/10.3390/biomimetics9050272 - 29 Apr 2024
Abstract
►▼
Show Figures
To inhibit the deep conversion of partial oxidation products (POX-products) in C-H bonds’ functionalization utilizing O2, 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin cobalt(II) and 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin copper(II) were immobilized on the surface of hybrid silica to conduct relay catalysis on the surface. Fluorocarbons with low polarity and
[...] Read more.
To inhibit the deep conversion of partial oxidation products (POX-products) in C-H bonds’ functionalization utilizing O2, 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin cobalt(II) and 5-(4-(chloromethyl)phenyl)-10,15,20-tris(perfluorophenyl)porphyrin copper(II) were immobilized on the surface of hybrid silica to conduct relay catalysis on the surface. Fluorocarbons with low polarity and heterogeneous catalysis were devised to decrease the convenient accessibility of polar POX-products to catalytic centers on the lower polar surface. Relay catalysis between Co and Cu was designed to utilize the oxidation intermediates alkyl hydroperoxides to transform more C-H bonds. Systematic characterizations were conducted to investigate the structure of catalytic materials and confirm their successful syntheses. Applied to C-H bond oxidation, not only deep conversion of POX-products was inhibited but also substrate conversion and POX-product selectivity were improved simultaneously. For cyclohexane oxidation, conversion was improved from 3.87% to 5.27% with selectivity from 84.8% to 92.3%, which was mainly attributed to the relay catalysis on the surface excluding products. The effects of the catalytic materials, product exclusion, relay catalysis, kinetic study, substrate scope, and reaction mechanism were also investigated. To our knowledge, a practical and novel strategy was presented to inhibit the deep conversion of POX-products and to achieve efficient and accurate oxidative functionalization of hydrocarbons. Also, a valuable protocol was provided to avoid over-reaction in other chemical transformations requiring high selectivity.
Full article
Figure 1
Open AccessArticle
A Sinh–Cosh-Enhanced DBO Algorithm Applied to Global Optimization Problems
by
Xiong Wang, Yaxin Wei, Zihao Guo, Jihong Wang, Hui Yu and Bin Hu
Biomimetics 2024, 9(5), 271; https://doi.org/10.3390/biomimetics9050271 - 29 Apr 2024
Abstract
The Dung beetle optimization (DBO) algorithm, devised by Jiankai Xue in 2022, is known for its strong optimization capabilities and fast convergence. However, it does have certain limitations, including insufficiently random population initialization, slow search speed, and inadequate global search capabilities. Drawing inspiration
[...] Read more.
The Dung beetle optimization (DBO) algorithm, devised by Jiankai Xue in 2022, is known for its strong optimization capabilities and fast convergence. However, it does have certain limitations, including insufficiently random population initialization, slow search speed, and inadequate global search capabilities. Drawing inspiration from the mathematical properties of the Sinh and Cosh functions, we proposed a new metaheuristic algorithm, Sinh–Cosh Dung Beetle Optimization (SCDBO). By leveraging the Sinh and Cosh functions to disrupt the initial distribution of DBO and balance the development of rollerball dung beetles, SCDBO enhances the search efficiency and global exploration capabilities of DBO through nonlinear enhancements. These improvements collectively enhance the performance of the dung beetle optimization algorithm, making it more adept at solving complex real-world problems. To evaluate the performance of the SCDBO algorithm, we compared it with seven typical algorithms using the CEC2017 test functions. Additionally, by successfully applying it to three engineering problems, robot arm design, pressure vessel problem, and unmanned aerial vehicle (UAV) path planning, we further demonstrate the superiority of the SCDBO algorithm.
Full article
(This article belongs to the Special Issue Bio-Inspired Optimization Algorithms and Designs for Engineering Applications: 2nd Edition)
►▼
Show Figures
Figure 1
Open AccessArticle
A Multi-Objective Optimization Problem Solving Method Based on Improved Golden Jackal Optimization Algorithm and Its Application
by
Shijie Jiang, Yinggao Yue, Changzu Chen, Yaodan Chen and Li Cao
Biomimetics 2024, 9(5), 270; https://doi.org/10.3390/biomimetics9050270 - 28 Apr 2024
Abstract
The traditional golden jackal optimization algorithm (GJO) has slow convergence speed, insufficient accuracy, and weakened optimization ability in the process of finding the optimal solution. At the same time, it is easy to fall into local extremes and other limitations. In this paper,
[...] Read more.
The traditional golden jackal optimization algorithm (GJO) has slow convergence speed, insufficient accuracy, and weakened optimization ability in the process of finding the optimal solution. At the same time, it is easy to fall into local extremes and other limitations. In this paper, a novel golden jackal optimization algorithm (SCMGJO) combining sine–cosine and Cauchy mutation is proposed. On one hand, tent mapping reverse learning is introduced in population initialization, and sine and cosine strategies are introduced in the update of prey positions, which enhances the global exploration ability of the algorithm. On the other hand, the introduction of Cauchy mutation for perturbation and update of the optimal solution effectively improves the algorithm’s ability to obtain the optimal solution. Through the optimization experiment of 23 benchmark test functions, the results show that the SCMGJO algorithm performs well in convergence speed and accuracy. In addition, the stretching/compression spring design problem, three-bar truss design problem, and unmanned aerial vehicle path planning problem are introduced for verification. The experimental results prove that the SCMGJO algorithm has superior performance compared with other intelligent optimization algorithms and verify its application ability in engineering applications.
Full article
(This article belongs to the Special Issue Nature-Inspired Metaheuristic Optimization Algorithms 2024)
►▼
Show Figures
Figure 1
Open AccessArticle
Design and Analysis of a Polymeric Left Ventricular Simulator via Computational Modelling
by
Turgut Batuhan Baturalp and Selim Bozkurt
Biomimetics 2024, 9(5), 269; https://doi.org/10.3390/biomimetics9050269 - 28 Apr 2024
Abstract
Preclinical testing of medical devices is an essential step in the product life cycle, whereas testing of cardiovascular implants requires specialised testbeds or numerical simulations using computer software Ansys 2016. Existing test setups used to evaluate physiological scenarios and test cardiac implants such
[...] Read more.
Preclinical testing of medical devices is an essential step in the product life cycle, whereas testing of cardiovascular implants requires specialised testbeds or numerical simulations using computer software Ansys 2016. Existing test setups used to evaluate physiological scenarios and test cardiac implants such as mock circulatory systems or isolated beating heart platforms are driven by sophisticated hardware which comes at a high cost or raises ethical concerns. On the other hand, computational methods used to simulate blood flow in the cardiovascular system may be simplified or computationally expensive. Therefore, there is a need for low-cost, relatively simple and efficient test beds that can provide realistic conditions to simulate physiological scenarios and evaluate cardiovascular devices. In this study, the concept design of a novel left ventricular simulator made of latex rubber and actuated by pneumatic artificial muscles is presented. The designed left ventricular simulator is geometrically similar to a native left ventricle, whereas the basal diameter and long axis length are within an anatomical range. Finite element simulations evaluating left ventricular twisting and shortening predicted that the designed left ventricular simulator rotates approximately 17 degrees at the apex and the long axis shortens around 11 mm. Experimental results showed that the twist angle is 18 degrees and the left ventricular simulator shortens 5 mm. Twist angles and long axis shortening as in a native left ventricle show it is capable of functioning like a native left ventricle and simulating a variety of scenarios, and therefore has the potential to be used as a test platform.
Full article
(This article belongs to the Special Issue Bioinspired Structures for Soft Actuators)
►▼
Show Figures
Figure 1
Open AccessArticle
Surface Thermodynamic Properties of Poly Lactic Acid by Inverse Gas Chromatography
by
Tayssir Hamieh
Biomimetics 2024, 9(5), 268; https://doi.org/10.3390/biomimetics9050268 - 28 Apr 2024
Abstract
Poly lactic acid (PLA) is one of the most commonly used bio-derived thermoplastic polymers in 3D and 4D printing applications. The determination of PLA surface properties is of capital importance in 3D/4D printing technology. The surface thermodynamic properties of PLA polymers were determined
[...] Read more.
Poly lactic acid (PLA) is one of the most commonly used bio-derived thermoplastic polymers in 3D and 4D printing applications. The determination of PLA surface properties is of capital importance in 3D/4D printing technology. The surface thermodynamic properties of PLA polymers were determined using the inverse gas chromatography (IGC) technique at infinite dilution. The determination of the retention volume of polar and non-polar molecules adsorbed on the PLA particles filling the column allowed us to obtain the dispersive, polar, and Lewis’s acid–base surface properties at different temperatures from 40 °C to 100 °C. The applied surface method was based on our recent model that used the London dispersion equation, the new chromatographic parameter function of the deformation polarizability, and the harmonic mean of the ionization energies of the PLA polymer and organic molecules. The application of this new method led to the determination of the dispersive and polar free surface energy of the adsorption of molecules on the polymeric material, as well as the glass transition and the Lewis acid–base constants. Four interval temperatures were distinguished, showing four zones of variations in the surface properties of PLA as a function of the temperature before and after the glass transition. The acid–base parameters of PLA strongly depend on the temperature. The accurate determination of the dispersive and polar surface physicochemical properties of PLA led to the work of adhesion of the polar organic solvents adsorbed on PLA. These results can be very useful for achieving reliable and functional 3D and 4D printed components.
Full article
(This article belongs to the Special Issue Biomimicry and 3D Printing of Living Materials: 2nd Edition)
►▼
Show Figures
Figure 1
Open AccessSystematic Review
Influence of Immediate Dentin Sealing on Bond Strength of Resin-Based CAD/CAM Restoratives to Dentin: A Systematic Review of In Vitro Studies
by
Iliana Antoniou, Petros Mourouzis, Dimitrios Dionysopoulos, Panagiotis Pandoleon and Kosmas Tolidis
Biomimetics 2024, 9(5), 267; https://doi.org/10.3390/biomimetics9050267 - 28 Apr 2024
Abstract
Immediate dentin sealing (IDS) is a method of improving the bond strength of indirect dental restorative materials to dentin and belongs to the biomimetic protocols of contemporary dentistry. The purpose of this systematic review was to evaluate the effect of IDS on the
[...] Read more.
Immediate dentin sealing (IDS) is a method of improving the bond strength of indirect dental restorative materials to dentin and belongs to the biomimetic protocols of contemporary dentistry. The purpose of this systematic review was to evaluate the effect of IDS on the bond strength of resin-based CAD/CAM materials to dentin. PubMed and MEDLINE, Scopus, and the Web of Science were searched by two individual researchers, namely for studies that have been published in English between 1 January 2005 and 31 December 2023 in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The inclusion criteria encompassed articles related to in vitro studies, measuring the bond strength through microtensile bond strength (μ-TBS), micro-shear bond strength (μ-SBS), tensile bond strength (TBS) or shear bond strength (SBS) tests after the use of the IDS technique. The included restorative materials comprised resin-based CAD/CAM materials bonded to dentin. A total of 1821 studies were identified, of which 7 met the inclusion criteria. A meta-analysis was not deemed appropriate due to the high level of diversity inthe publications and techniques. The use of IDS yielded higher bond strength outcomesin various experimental conditions and resin-based CAD/CAM materials. Overall, IDS in CAD/CAM restorations may contribute to better clinical outcomesand improved restoration longevity due to this property.
Full article
(This article belongs to the Special Issue Advances in Bioceramics for Bone Regeneration)
►▼
Show Figures
Figure 1
Open AccessArticle
Bilateral Elimination Rule-Based Finite Class Bayesian Inference System for Circular and Linear Walking Prediction
by
Wentao Sheng, Tianyu Gao, Keyao Liang and Yumo Wang
Biomimetics 2024, 9(5), 266; https://doi.org/10.3390/biomimetics9050266 - 27 Apr 2024
Abstract
Objective: The prediction of upcoming circular walking during linear walking is important for the usability and safety of the interaction between a lower limb assistive device and the wearer. This study aims to build a bilateral elimination rule-based finite class Bayesian inference system
[...] Read more.
Objective: The prediction of upcoming circular walking during linear walking is important for the usability and safety of the interaction between a lower limb assistive device and the wearer. This study aims to build a bilateral elimination rule-based finite class Bayesian inference system (BER-FC-BesIS) with the ability to predict the transition between circular walking and linear walking using inertial measurement units. Methods: Bilateral motion data of the human body were used to improve the recognition and prediction accuracy of BER-FC-BesIS. Results: The mean predicted time of BER-FC-BesIS in predicting the left and right lower limbs’ upcoming steady walking activities is 119.32 ± 9.71 ms and 113.75 ± 11.83 ms, respectively. The mean time differences between the predicted time and the real time of BER-FC-BesIS in the left and right lower limbs’ prediction are 14.22 ± 3.74 ms and 13.59 ± 4.92 ms, respectively. The prediction accuracy of BER-FC-BesIS is 93.98%. Conclusion: Upcoming steady walking activities (e.g., linear walking and circular walking) can be accurately predicted by BER-FC-BesIS innovatively. Significance: This study could be helpful and instructional to improve the lower limb assistive devices’ capabilities of walking activity prediction with emphasis on non-linear walking activities in daily living.
Full article
(This article belongs to the Special Issue Biomimetic Aspects of Human–Computer Interactions)
►▼
Show Figures
Figure 1
Open AccessArticle
Biped Gait Stability Classification Based on the Predicted Step Viability
by
Pedro Parik-Americano, Jorge Igual, Larissa Driemeier, Eric Cito Becman and Arturo Forner-Cordero
Biomimetics 2024, 9(5), 265; https://doi.org/10.3390/biomimetics9050265 - 27 Apr 2024
Abstract
In this paper, we address the challenge of ensuring stability in bipedal walking robots and exoskeletons. We explore the feasibility of real-time implementation for the Predicted Step Viability algorithm (PSV), a complex multi-step optimization criterion for planning future steps in bipedal gait. To
[...] Read more.
In this paper, we address the challenge of ensuring stability in bipedal walking robots and exoskeletons. We explore the feasibility of real-time implementation for the Predicted Step Viability algorithm (PSV), a complex multi-step optimization criterion for planning future steps in bipedal gait. To overcome the high computational cost of the PSV algorithm, we performed an analysis using 11 classification algorithms and a stacking strategy to predict if a step will be stable or not. We generated three datasets of increasing complexity through PSV simulations to evaluate the classification performance. Among the classifiers, k Nearest Neighbors, Support Vector Machine with Radial Basis Function Kernel, Decision Tree, and Random Forest exhibited superior performance. Multi-Layer Perceptron also consistently performed well, while linear-based algorithms showed lower performance. Importantly, the use of stacking did not significantly improve performance. Our results suggest that the feature vector applied with this approach is applicable across various robotic models and datasets, provided that training data is balanced and sufficient points are used. Notably, by leveraging classifiers, we achieved rapid computation of results in less than 1 ms, with minimal computational cost.
Full article
(This article belongs to the Section Locomotion and Bioinspired Robotics)
►▼
Show Figures
Figure 1
Open AccessArticle
Seahorse-Tail-Inspired Soft Pneumatic Actuator: Development and Experimental Characterization
by
Michele Gabrio Antonelli, Pierluigi Beomonte Zobel, Muhammad Aziz Sarwar and Nicola Stampone
Biomimetics 2024, 9(5), 264; https://doi.org/10.3390/biomimetics9050264 - 27 Apr 2024
Abstract
The study of bio-inspired structures and their reproduction has always fascinated humans. The advent of soft robotics, thanks to soft materials, has enabled considerable progress in this field. Over the years, polyps, worms, cockroaches, jellyfish, and multiple anthropomorphic structures such as hands or
[...] Read more.
The study of bio-inspired structures and their reproduction has always fascinated humans. The advent of soft robotics, thanks to soft materials, has enabled considerable progress in this field. Over the years, polyps, worms, cockroaches, jellyfish, and multiple anthropomorphic structures such as hands or limbs have been reproduced. These structures have often been used for gripping and handling delicate objects or those with complex unknown a priori shapes. Several studies have also been conducted on grippers inspired by the seahorse tail. In this paper, a novel biomimetic soft pneumatic actuator inspired by the tail of the seahorse Hippocampus reidi is presented. The actuator has been developed to make a leg to sustain a multi-legged robot. The prototyping of the actuator was possible by combining a 3D-printed reinforcement in thermoplastic polyurethane, mimicking the skeletal apparatus, within a silicone rubber structure, replicating the functions of the external epithelial tissue. The latter has an internal channel for pneumatic actuation that acts as the inner muscle. The study on the anatomy and kinematic behaviour of the seahorse tail suggested the mechanical design of the actuator. Through a test campaign, the actuator prototype was characterized by isotonic tests with an external null load, isometric tests, and activation/deactivation times. Specifically, the full actuator distension of 154.5 mm occurs at 1.8 bar, exerting a maximum force of 11.9 N, with an activation and deactivation time of 74.9 and 94.5 ms, respectively.
Full article
(This article belongs to the Special Issue Bioinspired Structures for Soft Actuators)
►▼
Show Figures
Figure 1
Open AccessArticle
Trajectory Tracking Control of Variable Sweep Aircraft Based on Reinforcement Learning
by
Rui Cao and Kelin Lu
Biomimetics 2024, 9(5), 263; https://doi.org/10.3390/biomimetics9050263 - 27 Apr 2024
Abstract
An incremental deep deterministic policy gradient (IDDPG) algorithm is devised for the trajectory tracking control of a four-wing variable sweep (FWVS) aircraft with uncertainty. The IDDPG algorithm employs the line-of-sight (LOS) method for path tracking, formulates a reward function based on position and
[...] Read more.
An incremental deep deterministic policy gradient (IDDPG) algorithm is devised for the trajectory tracking control of a four-wing variable sweep (FWVS) aircraft with uncertainty. The IDDPG algorithm employs the line-of-sight (LOS) method for path tracking, formulates a reward function based on position and attitude errors, and integrates long short-term memory (LSTM) units into IDDPG algorithm to enhance its adaptability to environmental changes during flight. Finally, environmental disturbance factors are introduced in simulation to validate the designed controller’s ability to track climbing trajectories of morphing aircraft in the presence of uncertainty.
Full article
(This article belongs to the Special Issue Compliant vs Kinematic Morphing Architectures: Complementary or Alternatives?)
►▼
Show Figures
Figure 1
Open AccessArticle
Reducing Inert Materials for Optimal Cell–Cell and Cell–Matrix Interactions within Microphysiological Systems
by
Claudia Olaizola-Rodrigo, Héctor Castro-Abril, Ismael Perisé-Badía, Lara Pancorbo, Ignacio Ochoa, Rosa Monge and Sara Oliván
Biomimetics 2024, 9(5), 262; https://doi.org/10.3390/biomimetics9050262 - 25 Apr 2024
Abstract
►▼
Show Figures
In the pursuit of achieving a more realistic in vitro simulation of human biological tissues, microfluidics has emerged as a promising technology. Organ-on-a-chip (OoC) devices, a product of this technology, contain miniature tissues within microfluidic chips, aiming to closely mimic the in vivo
[...] Read more.
In the pursuit of achieving a more realistic in vitro simulation of human biological tissues, microfluidics has emerged as a promising technology. Organ-on-a-chip (OoC) devices, a product of this technology, contain miniature tissues within microfluidic chips, aiming to closely mimic the in vivo environment. However, a notable drawback is the presence of inert material between compartments, hindering complete contact between biological tissues. Current membranes, often made of PDMS or plastic materials, prevent full interaction between cell types and nutrients. Furthermore, their non-physiological mechanical properties and composition may induce unexpected cell responses. Therefore, it is essential to minimize the contact area between cells and the inert materials while simultaneously maximizing the direct contact between cells and matrices in different compartments. The main objective of this work is to minimize inert materials within the microfluidic chip while preserving proper cellular distribution. Two microfluidic devices were designed, each with a specific focus on maximizing direct cell–matrix or cell–cell interactions. The first chip, designed to increase direct cell–cell interactions, incorporates a nylon mesh with regular pores of 150 microns. The second chip minimizes interference from inert materials, thereby aiming to increase direct cell–matrix contact. It features an inert membrane with optimized macropores of 1 mm of diameter for collagen hydrogel deposition. Biological validation of both devices has been conducted through the implementation of cell migration and cell-to-cell interaction assays, as well as the development of epithelia, from isolated cells or spheroids. This endeavor contributes to the advancement of microfluidic technology, aimed at enhancing the precision and biological relevance of in vitro simulations in pursuit of more biomimetic models.
Full article
Graphical abstract
Open AccessArticle
Bio-Inspired Textiles for Self-Driven Oil–Water Separation—A Simulative Analysis of Fluid Transport
by
Leonie Beek, Jan-Eric Skirde, Musa Akdere and Thomas Gries
Biomimetics 2024, 9(5), 261; https://doi.org/10.3390/biomimetics9050261 - 25 Apr 2024
Abstract
In addition to water repellency, superhydrophobic leaves of plants such as Salvinia molesta adsorb oil and separate it from water surfaces. This phenomenon has been the inspiration for a new method of oil–water separation, the bionic oil adsorber (BOA). In this paper, we
[...] Read more.
In addition to water repellency, superhydrophobic leaves of plants such as Salvinia molesta adsorb oil and separate it from water surfaces. This phenomenon has been the inspiration for a new method of oil–water separation, the bionic oil adsorber (BOA). In this paper, we show how the biological effect can be abstracted and transferred to technical textiles, in this case knitted spacer textiles hydrophobized with a layered silicate, oriented at the biology push approach. Subsequently, the transport of the oil within the bio-inspired textile is analyzed by a three-dimensional fluid simulation. This fluid simulation shows that the textile can be optimized by reducing the pile yarn length, increasing the pile yarn spacing, and increasing the pile yarn diameter. For the first time, it has been possible with this simulation to optimize the bio-inspired textile with regard to oil transport with little effort and thus enable the successful implementation of a self-driven and sustainable oil removal method.
Full article
(This article belongs to the Special Issue Biological and Bioinspired Smart Adaptive Structures)
►▼
Show Figures
Figure 1
Open AccessArticle
Design of Bionic Foot Inspired by the Anti-Slip Cushioning Mechanism of Yak Feet
by
Weijun Tian, Kuiyue Zhou, Zhu Chen, Ziteng Shen, Zhirui Wang, Lei Jiang and Qian Cong
Biomimetics 2024, 9(5), 260; https://doi.org/10.3390/biomimetics9050260 - 25 Apr 2024
Abstract
►▼
Show Figures
In recent years, legged robots have been more and more widely used on non-structured terrain, and their foot structure has an important impact on the robot’s motion performance and stability. The structural characteristics of the yak foot sole with a high outer edge
[...] Read more.
In recent years, legged robots have been more and more widely used on non-structured terrain, and their foot structure has an important impact on the robot’s motion performance and stability. The structural characteristics of the yak foot sole with a high outer edge and low middle, which has excellent soil fixation ability and is an excellent bionic prototype, can improve the friction between the foot and the ground. At the same time, the foot hooves can effectively alleviate the larger impact load when contacting with the ground, which is an excellent anti-slip buffer mechanism. The bionic foot end design was carried out based on the morphology of the yak sole; the bionic foot design was carried out based on the biological anatomy observation of yak foot skeletal muscles. The virtual models of the bionic foot end and the bionic foot were established and simulated using Solidworks 2022 and Abaqus 2023, and the anti-slip performance on different ground surfaces and the influence of each parameter of the bionic foot on the cushioning effect were investigated. The results show that (1) the curved shape of the yak sole has a good anti-slip performance on both soil ground and rocky ground, and the anti-slip performance is better on soil ground; (2) the curved shape of the yak sole has a larger maximum static friction than the traditional foot, and the anti-slip performance is stronger under the same pressure conditions; (3) the finger pillow–hoof ball structure of the bionic foot has the greatest influence on the buffering effect, and the buffering effect of the bionic foot is best when the tip of the bionic foot touches the ground first.
Full article
Figure 1
Open AccessArticle
Dynamic 3D Point-Cloud-Driven Autonomous Hierarchical Path Planning for Quadruped Robots
by
Qi Zhang, Ruiya Li, Jubiao Sun, Li Wei, Jun Huang and Yuegang Tan
Biomimetics 2024, 9(5), 259; https://doi.org/10.3390/biomimetics9050259 - 24 Apr 2024
Abstract
Aiming at effectively generating safe and reliable motion paths for quadruped robots, a hierarchical path planning approach driven by dynamic 3D point clouds is proposed in this article. The developed path planning model is essentially constituted of two layers: a global path planning
[...] Read more.
Aiming at effectively generating safe and reliable motion paths for quadruped robots, a hierarchical path planning approach driven by dynamic 3D point clouds is proposed in this article. The developed path planning model is essentially constituted of two layers: a global path planning layer, and a local path planning layer. At the global path planning layer, a new method is proposed for calculating the terrain potential field based on point cloud height segmentation. Variable step size is employed to improve the path smoothness. At the local path planning layer, a real-time prediction method for potential collision areas and a strategy for temporary target point selection are developed. Quadruped robot experiments were carried out in an outdoor complex environment. The experimental results verified that, for global path planning, the smoothness of the path is improved and the complexity of the passing ground is reduced. The effective step size is increased by a maximum of 13.4 times, and the number of iterations is decreased by up to 1/6, compared with the traditional fixed step size planning algorithm. For local path planning, the path length is shortened by 20%, and more efficient dynamic obstacle avoidance and more stable velocity planning are achieved by using the improved dynamic window approach (DWA).
Full article
(This article belongs to the Special Issue Biomimicry for Optimization, Control, and Automation: 2nd Edition)
►▼
Show Figures
Figure 1
Highly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Bioengineering, Biology, Biomimetics, Life, Molecules
Biomarkers and Therapeutic Targets Based on Bioinformatical Studies
Topic Editors: Qingjia Chi, Xiangcheng ChenDeadline: 31 December 2024
Topic in
Applied Sciences, Electronics, Future Internet, Machines, Systems, Technologies, Biomimetics
Theoretical and Applied Problems in Human-Computer Intelligent Systems
Topic Editors: Jiahui Yu, Charlie Yang, Zhenyu Wen, Dalin Zhou, Dongxu Gao, Changting LinDeadline: 30 June 2025
Conferences
Special Issues
Special Issue in
Biomimetics
Biological Attachment Systems and Biomimetics
Guest Editors: Stanislav N. Gorb, Thies BüscherDeadline: 20 May 2024
Special Issue in
Biomimetics
Bio-Inspired Optimization Algorithms and Designs for Engineering Applications: 2nd Edition
Guest Editors: Heming Jia, Laith Abualigah, Xuewen XiaDeadline: 31 May 2024
Special Issue in
Biomimetics
Bionic Design & Lightweight Engineering
Guest Editor: Xiaoming ZhangDeadline: 10 June 2024
Special Issue in
Biomimetics
Recent Advances in Robotics and Biomimetics
Guest Editors: Weiwei Wan, Peng Li, Yayi ShenDeadline: 30 June 2024