Vegetation properties can be estimated using optical sensors, acquiring data on board of different platforms. For instance, ground-based and Unmanned Aerial Vehicle (UAV)-borne spectrometers can measure reflectance in narrow spectral bands, while different modelling approaches, like regressions fitted to vegetation indices, can relate spectra with crop traits. Although monitoring frameworks using multiple sensors can be more flexible, they may result in higher inaccuracy due to differences related to the sensors characteristics, which can affect information sampling. Also organic production systems can benefit from continuous monitoring focusing on crop management and stress detection, but few studies have evaluated applications with this objective. In this study, ground-based and UAV spectrometers were compared in the context of organic potato cultivation. Relatively accurate estimates were obtained for leaf chlorophyll (RMSE = 6.07 µg·cm⁻²), leaf area index (RMSE = 0.67 m²·m⁻²), canopy chlorophyll (RMSE = 0.24 g·m⁻²) and ground cover (RMSE = 5.5%) using five UAV-based data acquisitions, from 43 to 99 days after planting. These retrievals are slightly better than those derived from ground-based measurements (RMSE = 7.25 µg·cm⁻², 0.85 m²·m⁻², 0.28 g·m⁻² and 6.8%, respectively), for the same period. Excluding observations corresponding to the first acquisition increased retrieval accuracy and made outputs more comparable between sensors, due to relatively low vegetation cover on this date. Intercomparison of vegetation indices indicated that indices based on the contrast between spectral bands in the visible and near-infrared, like OSAVI, MCARI2 and CI_g provided, at certain extent, robust outputs that could be transferred between sensors. Information sampling at plot level by both sensing solutions resulted in comparable discriminative potential concerning advanced stages of late blight incidence. These results indicate that optical sensors, and their integration, have great potential for monitoring this specific organic cropping system. Full article

Viewing and illumination geometry has a strong influence on optical measurements of natural surfaces due to their anisotropic reflectance properties. Typically, cameras on-board unmanned aerial vehicles (UAVs) are affected by this because of their relatively large field of view (FOV) and thus large range of viewing angles. In this study, we investigated the magnitude of reflectance anisotropy effects in the 500–900 nm range, captured by a frame camera mounted on a UAV during a standard mapping flight. After orthorectification and georeferencing of the images collected by the camera, we calculated the viewing geometry of all observations of each georeferenced ground pixel, forming a dataset with multi-angular observations. We performed UAV flights on two days during the summer of 2016 over an experimental potato field where different zones in the field received different nitrogen fertilization treatments. These fertilization levels caused variation in potato plant growth and thereby differences in structural properties such as leaf area index (LAI) and canopy cover. We fitted the Rahman–Pinty–Verstraete (RPV) model through the multi-angular observations of each ground pixel to quantify, interpret, and visualize the anisotropy patterns in our study area. The $\Theta$ parameter of the RPV model, which controls the proportion of forward and backward scattering, showed strong correlation with canopy cover, where in general an increase in canopy cover resulted in a reduction of backward scattering intensity, indicating that reflectance anisotropy contains information on canopy structure. In this paper, we demonstrated that anisotropy data can be extracted from measurements using a frame camera, collected during a typical UAV mapping flight. Future research will focus on how to use the anisotropy signal as a source of information for estimation of physical vegetation properties. Full article

Leaf area index (LAI) and chlorophyll content, at leaf and canopy level, are important variables for agricultural applications because of their crucial role in photosynthesis and in plant functioning. The goal of this study was to test the hypothesis that LAI, leaf chlorophyll content (LCC), and canopy chlorophyll content (CCC) of a potato crop can be estimated by vegetation indices for the first time using Sentinel-2 satellite images. In 2016 ten plots of 30 × 30 m were designed in a potato field with different fertilization levels. During the growing season approximately 10 daily radiometric field measurements were used to determine LAI, LCC, and CCC. These radiometric determinations were extensively calibrated against LAI2000 and chlorophyll meter (SPAD, soil plant analysis development) measurements for potato crops grown in the years 2010–2014. Results for Sentinel-2 showed that the weighted difference vegetation index (WDVI) using bands at 10 m spatial resolution can be used for estimating the LAI (R² of 0.809; root mean square error of prediction (RMSEP) of 0.36). The ratio of the transformed chlorophyll in reflectance index and the optimized soil-adjusted vegetation index (TCARI/OSAVI) showed to be a good linear estimator of LCC at 20 m (R² of 0.696; RMSEP of 0.062 g·m⁻²). The performance of the chlorophyll vegetation index (CVI) at 10 m spatial resolution was slightly worse (R² of 0.656; RMSEP of 0.066 g·m⁻²) compared to TCARI/OSAVI. Finally, results showed that the green chlorophyll index (CI_green) was an accurate and linear estimator of CCC at 10 m (R² of 0.818; RMSEP of 0.29 g·m⁻²). Results for CI_green were better than for the red-edge chlorophyll index (CI_red-edge, R² of 0.576, RMSE of 0.43 g·m⁻²). Our results show that Sentinel-2 bands at 10 m spatial resolution are suitable for estimating LAI, LCC, and CCC, avoiding the need for red-edge bands that are only available at 20 m. This is an important finding for applying Sentinel-2 data in precision agriculture. Full article

Appropriate management of (semi-)natural areas requires detailed knowledge of the ecosystems present and their status. Remote sensing can provide a systematic, synoptic view at regular time intervals, and is therefore often suggested as a powerful tool to assist with the mapping and monitoring of protected habitats and vegetation. In this study, we present a multi-step mapping framework that enables detailed NATURA 2000 (N2000) heathland habitat patch mapping and the assessment of their conservation status at patch level. The method comprises three consecutive steps: (1) a hierarchical land/vegetation type (LVT) classification using airborne AHS imaging spectroscopy and field reference data; (2) a spatial re-classification to convert the LVT map to a patch map based on life forms; and (3) identification of the N2000 habitat type and conservation status parameters for each of the patches. Based on a multivariate analysis of 1325 vegetation reference plots acquired in 2006–2007, 24 LVT classes were identified that were considered relevant for the assessment of heathland conservation status. These labelled data were then used as ground reference for the supervised classification of the AHS image data to an LVT classification map, using Linear Discriminant Analysis in combination with Sequential-Floating-Forward-Search feature selection. Overall classification accuracies for the LVT mapping varied from 83% to 92% (Kappa ≈ 0.82–0.91), depending on the level of detail in the hierarchical classification. After converting the LVT map to a N2000 habitat type patch map, an overall accuracy of 89% was obtained. By combining the N2000 habitat type patch map with the LVT map, two important conservation status parameters were directly deduced per patch: tree and shrub cover, and grass cover, showing a strong similarity to an independent dataset with estimates made in the field in 2009. The results of this study indicate the potential of imaging spectroscopy for detailed heathland habitat characterization of N2000 sites in a way that matches the current field-based workflows of the user. Full article

The archiving of scientific data is a sophisticated mission in nearly all research projects. In this paper, we introduce a new online archive of atmospheric measurement data from the "High definition clouds and precipitation for advancing climate prediction" (HD(CP)²) research initiative. The project data archive is quality managed, easy to use, and is now open for other atmospheric research data. The archive’s creation was already taken into account during the HD(CP)² project planning phase and the necessary resources were granted. The funding enabled the HD(CP)² project to build a sound archive structure, which guarantees that the collected data are accessible for all researchers in the project and beyond. Full article

Grassland ecosystems cover around 40% of the entire Earth’s surface. Therefore, it is necessary to guarantee good grassland management at field scale in order to improve its conservation and to achieve optimal growth. This study identified the most appropriate statistical strategy, between partial least squares regression (PLSR) and narrow vegetation indices, for estimating the structural and biochemical grassland traits from UAV-acquired hyperspectral images. Moreover, the influence of fertilizers on plant traits for grasslands was analyzed. Hyperspectral data were collected from an experimental field at the farm Haus Riswick, near Kleve in Germany, for two different flight campaigns in May and October. The collected image blocks were geometrically and radiometrically corrected for surface reflectance. Spectral signatures extracted for the plots were adopted to derive grassland traits by computing PLSR and the following narrow vegetation indices: the MERIS Terrestrial Chlorophyll Index (MTCI), the ratio of the Modified Chlorophyll Absorption in Reflectance and Optimized Soil-Adjusted Vegetation Index (MCARI/OSAVI) modified by Wu, the Red-edge Chlorophyll Index (CI_red-edge), and the Normalized Difference Red Edge (NDRE). PLSR showed promising results for estimating grassland structural traits and gave less satisfying outcomes for the selected chemical traits (crude ash, crude fiber, crude protein, Na, K, metabolic energy). Established relations are not influenced by the type and the amount of fertilization, while they are affected by the grassland health status. PLSR is found to be the best strategy, among the approaches analyzed in this paper, for exploring structural and biochemical features of grasslands. Using UAV-based hyperspectral sensing allows for the highly detailed assessment of grassland experimental plots. Full article

During the last years commercial hyperspectral imaging sensors have been miniaturized and their performance has been demonstrated on Unmanned Aerial Vehicles (UAV). However currently the commercial hyperspectral systems still require minimum payload capacity of approximately 3 kg, forcing usage of rather large UAVs. In this article we present a lightweight hyperspectral mapping system (HYMSY) for rotor-based UAVs, the novel processing chain for the system, and its potential for agricultural mapping and monitoring applications. The HYMSY consists of a custom-made pushbroom spectrometer (400–950 nm, 9 nm FWHM, 25 lines/s, 328 px/line), a photogrammetric camera, and a miniature GPS-Inertial Navigation System. The weight of HYMSY in ready-to-fly configuration is only 2.0 kg and it has been constructed mostly from off-the-shelf components. The processing chain uses a photogrammetric algorithm to produce a Digital Surface Model (DSM) and provides high accuracy orientation of the system over the DSM. The pushbroom data is georectified by projecting it onto the DSM with the support of photogrammetric orientations and the GPS-INS data. Since an up-to-date DSM is produced internally, no external data are required and the processing chain is capable to georectify pushbroom data fully automatically. The system has been adopted for several experimental flights related to agricultural and habitat monitoring applications. For a typical flight, an area of 2–10 ha was mapped, producing a RGB orthomosaic at 1–5 cm resolution, a DSM at 5–10 cm resolution, and a hyperspectral datacube at 10–50 cm resolution. Full article

Within the Reducing Emissions from Deforestation and Degradation (REDD+) framework, the involvement of local communities in national forest monitoring activities has the potential to enhance monitoring efficiency at lower costs while simultaneously promoting transparency and better forest management. We assessed the consistency of forest monitoring data (mostly activity data related to forest change) collected by local experts in the UNESCO Kafa Biosphere Reserve, Ethiopia. Professional ground measurements and high resolution satellite images were used as validation data to assess over 700 forest change observations collected by the local experts. Furthermore, we examined the complementary use of local datasets and remote sensing by assessing spatial, temporal and thematic data quality factors. Based on this complementarity, we propose a framework to integrate local expert monitoring data with satellite-based monitoring data into a National Forest Monitoring System (NFMS) in support of REDD+ Measuring, Reporting and Verifying (MRV) and near real-time forest change monitoring. Full article

Non-alcoholic steatohepatitis (NASH) represents a risk factor for the development of hepatocellular carcinoma (HCC) and is characterized by quantitative and qualitative changes in hepatic lipids. Since elongation of fatty acids from C16 to C18 has recently been reported to promote both hepatic lipid accumulation and inflammation we aimed to investigate whether a frequently used mouse NASH model reflects this clinically relevant feature and whether C16 to C18 elongation can be observed in HCC development. Feeding mice a methionine and choline deficient diet to model NASH not only increased total hepatic fatty acids and cholesterol, but also distinctly elevated the C18/C16 ratio, which was not changed in a model of simple steatosis (ob/ob mice). Depletion of Kupffer cells abrogated both quantitative and qualitative methionine-and-choline deficient (MCD)-induced alterations in hepatic lipids. Interestingly, mimicking inflammatory events in early hepatocarcinogenesis by diethylnitrosamine-induced carcinogenesis (48 h) increased hepatic lipids and the C18/C16 ratio. Analyses of human liver samples from patients with NASH or NASH-related HCC showed an elevated expression of the elongase ELOVL6, which is responsible for the elongation of C16 fatty acids. Taken together, our findings suggest a detrimental role of an altered fatty acid pattern in the progression of NASH-related liver disease. Full article

Estimating plant traits in herbaceous plant assemblages from spectral reflectance data requires aggregation of small scale trait variations to a canopy mean value that is ecologically meaningful and corresponds to the trait content that affects the canopy spectral signal. We investigated estimation capacities of plant traits in a herbaceous setting and how different trait-aggregation methods influence estimation accuracies. Canopy reflectance of 40 herbaceous plant assemblages was measured in situ and biomass was analysed for N, P and C concentration, chlorophyll, lignin, phenol, tannin and specific water concentration, expressed on a mass basis (mg∙g⁻¹). Using Specific Leaf Area (SLA) and Leaf Area Index (LAI), traits were aggregated to two additional expressions: mass per leaf surface (mg∙m⁻²) and mass per canopy surface (mg∙m⁻²). All traits were related to reflectance using partial least squares regression. Accuracy of trait estimation varied between traits but was mainly influenced by the trait expression. Chlorophyll and traits expressed on canopy surface were least accurately estimated. Results are attributed to damping or enhancement of the trait signal upon conversion from mass based trait values to leaf and canopy surface expressions. A priori determination of the most appropriate trait expression is viable by considering plant growing strategies. Full article

The common PNPLA3 (adiponutrin) variant, p.I148M, was identified as a genetic determinant of liver fibrosis. Since the expression of PNPLA3 is induced by sterol regulatory element binding protein 1c (SREBP1c), we investigate two common SREBP1c variants (rs2297508 and rs11868035) for their association with liver stiffness. In 899 individuals (aged 17–83 years, 547 males) with chronic liver diseases, hepatic fibrosis was non-invasively phenotyped by transient elastography (TE). The SREBP1c single nucleotide polymorphisms (SNPs) were genotyped using PCR-based assays with 5'-nuclease and fluorescence detection. The SREBP1c rs11868035 variant affected liver fibrosis significantly (p = 0.029): median TE levels were 7.2, 6.6 and 6.0 kPa in carriers of (TT) (n = 421), (CT) (n = 384) and (CC) (n = 87) genotypes, respectively. Overall, the SREBP1c SNP was associated with low TE levels (5.0–8.0 kPa). Carriers of both PNPLA3 and SREBP1c risk genotypes displayed significantly (p = 0.005) higher median liver stiffness, as compared to patients carrying none of these variants. The common SREBP1c variant may affect early stages of liver fibrosis. Our study supports a role of the SREBP1c-PNPLA3 pathway as a “disease module” that promotes hepatic fibrogenesis. Full article

River floodplains in the Netherlands serve as water storage areas, while they also have the function of nature rehabilitation areas. Floodplain vegetation is therefore subject to natural processes of vegetation succession. At the same time, vegetation encroachment obstructs the water flow into the floodplains and increases the flood risk for the hinterland. Spaceborne pointable imaging spectroscopy has the potential to quantify vegetation density on the basis of leaf area index (LAI) from a desired view zenith angle. In this respect, hyperspectral pointable CHRIS data were linked to the ray tracing canopy reflectance model FLIGHT to retrieve vegetation density estimates over a heterogeneous river floodplain. FLIGHT enables simulating top-of-canopy reflectance of vegetated surfaces either in turbid (e.g., grasslands) or in 3D (e.g., forests) mode. By inverting FLIGHT against CHRIS data, LAI was computed for three main classified vegetation types, ‘herbaceous’, ‘shrubs’ and ‘forest’, and for the CHRIS view zenith angles in nadir, backward (−36°) and forward (+36°) scatter direction. The −36° direction showed most LAI variability within the vegetation types and was best validated, closely followed by the nadir direction. The +36° direction led to poorest LAI retrievals. The class-based inversion process has been implemented into a GUI toolbox which would enable the river manager to generate LAI maps in a semiautomatic way. Full article

Sensor technology, which benefits from high temporal measuring resolution, real-time data transfer and high spatial resolution of sensor data that shows in-field variations, has the potential to provide added value for crop production. The present paper explores how sensors and sensor networks have been utilised in the crop production process and what their added-value and the main bottlenecks are from the perspective of users. The focus is on sensor based applications and on requirements that users pose for them. Literature and two use cases were reviewed and applications were classified according to the crop production process: sensing of growth conditions, fertilising, irrigation, plant protection, harvesting and fleet control. The potential of sensor technology was widely acknowledged along the crop production chain. Users of the sensors require easy-to-use and reliable applications that are actionable in crop production at reasonable costs. The challenges are to develop sensor technology, data interoperability and management tools as well as data and measurement services in a way that requirements can be met, and potential benefits and added value can be realized in the farms in terms of higher yields, improved quality of yields, decreased input costs and production risks, and less work time and load. Full article

The workshop “Sensing a Changing World” was held in Wageningen, The Netherlands, from November 19–21, 2008. The main goal of the workshop was to explore and discuss recent developments in sensors and (wireless) sensor networks for monitoring environmental processes and human spatial behavior in a changing world. The challenge is then to develop concepts and applications that can provide timely and on-demand knowledge to end-users in different domains over a range of different spatial and temporal scales. During this workshop over 50 participants, representing 15 countries, presented and discussed their recent research. The workshop provided a broad overview of state-of-the-art research in a broad range of application fields: oceanography, air quality, biodiversity and vegetation, health, tourism, water management, and agriculture. In addition the workshop identified the future research challenges. One of the outcomes of the workshop was a special issue in the journal Sensors with contributions presented at the workshop. This editorial of the special issue aims to provide an overview of the discussions held during the workshop. It highlights the ideas of the authors and participants of the workshop about directions of future research for further development of sensor-webs for “sensing” spatial phenomena. The “big” question was are we already able to sense a changing world? And if the answer is positive, then what are we going to sense and for what? Full article

This paper describes the development of a sensor web based approach which combines earth observation and in situ sensor data to derive typical information offered by a dynamic web mapping service (WMS). A prototype has been developed which provides daily maps of vegetation productivity for the Netherlands with a spatial resolution of 250 m. Daily available MODIS surface reflectance products and meteorological parameters obtained through a Sensor Observation Service (SOS) were used as input for a vegetation productivity model. This paper presents the vegetation productivity model, the sensor data sources and the implementation of the automated processing facility. Finally, an evaluation is made of the opportunities and limitations of sensor web based approaches for the development of web services which combine both satellite and in situ sensor sources. Full article