Over the last two decades, additive manufacturing (AM) or 3D printing technologies have become pervasive in both the public and private sectors. Despite this growth, there has been little to no deviation from the fundamental approach of building parts using planar layers. This undue reliance on a flat build surface limits part geometry and performance. To address these limitations, a new method of applying material onto or around existing surfaces with multilayer, thick features will be explored. Prior work proposes algorithms for defining conformal layers between existing and desired surfaces, however this work does not address the derivation of deposition paths, trajectories, or required hardware to achieve this new type of deposition. This paper presents (1) the derivation of deposition paths given a prescribed set of layers; (2) the design, characterization, and control of a proof-of-concept testbed; and (3) the derivation and application of time evolving trajectories subject to the material deposition constraints and mechanical constraints of the testbed. Derivations are presented in a general context with examples extending beyond the proposed testbed. Results show the feasibility of conformal material deposition (i.e., onto and around existing surfaces) with multilayer, thick features. Full article

Continuous Glucose Monitoring (CGM) systems could improve glycemic control in critically ill patients. We aimed to identify the evidence on the clinical benefits and accuracy of CGM systems in these patients. For this, we performed a systematic search in Ovid MEDLINE, from inception to 26 July 2016. Outcomes were efficacy, accuracy, safety, workload and costs. Our search retrieved 356 articles, of which 37 were included. Randomized controlled trials on efficacy were scarce (n = 5) and show methodological limitations. CGM with automated insulin infusion improved time in target and mean glucose in one trial and two trials showed a decrease in hypoglycemic episodes and time in hypoglycemia. Thirty-two articles assessed accuracy, which was overall moderate to good, the latter mainly with intravascular devices. Accuracy in critically ill children seemed lower than in adults. Adverse events were rare. One study investigated the effect on workload and cost, and showed a significant reduction in both. In conclusion, studies on the efficacy and accuracy were heterogeneous and difficult to compare. There was no consistent clinical benefit in the small number of studies available. Overall accuracy was moderate to good with some intravascular devices. CGM systems seemed however safe, and might positively affect workload and costs. Full article

Bed bugs, Cimex lectularius L., are a major pest in the urban environment. Their presence often results in physical, psychological, and financial distress of homeowners and apartment dwellers. Although many insecticide bioassays have been performed on this pest, little attention has been paid to bed bug feeding status, which is closely linked to metabolism, molting, and mass. Therefore, we evaluated the toxicity of topically applied deltamethrin on insecticide susceptible adult male bed bugs fed 2 d, 9 d, and 21 d prior to testing. When toxicity was evaluated on a “per-bug” basis, there was no difference between 2 d [LD₅₀ = 0.498 (0.316 − 0.692) ng·bug⁻¹] and 9 d [LD₅₀ = 0.572 (0.436 − 0.724) ng·bug⁻¹] starved bugs, while 21 d starved bugs had a significantly lower LD₅₀ [0.221 (0.075 − 0.386) ng·bug⁻¹]. When toxicity was evaluated in terms of body mass, 9 d starved bugs had the highest LD₅₀ values [0.138 (0.102 − 0.176) ng·mg⁻¹], followed by 2 d starved bugs [0.095 (0.060 − 0.134) ng·mg⁻¹], and then 21 d starved bugs [0.058 (0.019–0.102) ng·mg⁻¹]; the LD₅₀ values of 2 d and 9 d starved bugs were significantly different from 21 d starved bugs. These results indicate that feeding status plays an important role in the toxicity of deltamethrin. In addition, the lack of differences between 2 d and 9 d starved bugs indicate that the blood meal itself has little impact on tolerance, but rather it is some physiological change following feeding that confers increased tolerance to bed bugs. Full article

Johne’s disease (JD) is a chronic, production-limiting disease of ruminants. Control programs aiming to minimize the effects of the disease on the dairy industry have been launched in many countries, including Canada. Those programs commonly focus on strict hygiene and management improvement, often combined with various testing methods. Concurrently, organic dairy farming has been increasing in popularity. Because organic farming promotes traditional management practices, it has been proposed that organic dairy production regulations might interfere with implementation of JD control strategies. However, it is currently unclear how organic farming would change the risk for JD control. This review presents a brief introduction to organic dairy farming in Canada, JD, and the Canadian JD control programs. Subsequently, organic practices are described and hypotheses of their effects on JD transmission are developed. Empirical research is needed, not only to provide scientific evidence for organic producers, but also for smaller conventional farms employing organic-like management practices. Full article

Within the Reducing Emissions from Deforestation and Degradation (REDD+) framework, the involvement of local communities in national forest monitoring activities has the potential to enhance monitoring efficiency at lower costs while simultaneously promoting transparency and better forest management. We assessed the consistency of forest monitoring data (mostly activity data related to forest change) collected by local experts in the UNESCO Kafa Biosphere Reserve, Ethiopia. Professional ground measurements and high resolution satellite images were used as validation data to assess over 700 forest change observations collected by the local experts. Furthermore, we examined the complementary use of local datasets and remote sensing by assessing spatial, temporal and thematic data quality factors. Based on this complementarity, we propose a framework to integrate local expert monitoring data with satellite-based monitoring data into a National Forest Monitoring System (NFMS) in support of REDD+ Measuring, Reporting and Verifying (MRV) and near real-time forest change monitoring. Full article

In many Sub-Saharan African countries, fuelwood collection is among the most important drivers of deforestation and particularly forest degradation. In a detailed field study in the Kafa region of southern Ethiopia, we assessed the potential of efficient cooking stoves to mitigate the negative impacts of fuelwood harvesting on forests. Eleven thousand improved cooking stoves (ICS), specifically designed for baking Ethiopia’s staple food injera, referred to locally as “Mirt” stoves, have been distributed here. We found a high acceptance rate of the stove. One hundred forty interviews, including users and non-users of the ICS, revealed fuelwood savings of nearly 40% in injera preparation compared to the traditional three-stone fire, leading to a total annual savings of 1.28 tons of fuelwood per household. Considering the approximated share of fuelwood from unsustainable sources, these savings translate to 11,800 tons of CO₂ saved for 11,156 disseminated ICS, corresponding to the amount of carbon stored in over 30 ha of local forest. We further found that stove efficiency increased with longer injera baking sessions, which shows a way of optimizing fuelwood savings by adapted usage of ICS. Our study confirms that efficient cooking stoves, if well adapted to the local cooking habits, can make a significant contribution to the conservation of forests and the avoidance of carbon emission from forest clearing and degradation. Full article

Three forms of trust: topic-focused trust, general trust, and personal trust are distinguished. Personal trust is argued to be the most fundamental form of trust, deeply connected with the construction of one’s self. Information technology has posed new problems for us in assessing and developing appropriate forms of the trust that is central to our personhood. Full article