Functional thin films provide many opportunities for advanced glazing systems. This can be achieved by adding additional functionalities such as self-cleaning or power generation, or alternately by providing energy demand reduction through the management or modulation of solar heat gain or blackbody radiation using spectrally selective films or chromogenic materials. Self-cleaning materials have been generating increasing interest for the past two decades. They may be based on hydrophobic or hydrophilic systems and are often inspired by nature, for example hydrophobic systems based on mimicking the lotus leaf. These materials help to maintain the aesthetic properties of the building, help to maintain a comfortable working environment and in the case of photocatalytic materials, may provide external pollutant remediation. Power generation through window coatings is a relatively new idea and is based around the use of semi-transparent solar cells as windows. In this fashion, energy can be generated whilst also absorbing some solar heat. There is also the possibility, in the case of dye sensitized solar cells, to tune the coloration of the window that provides unheralded external aesthetic possibilities. Materials and coatings for energy demand reduction is highly desirable in an increasingly energy intensive world. We discuss new developments with low emissivity coatings as the need to replace scarce indium becomes more apparent. We go on to discuss thermochromic systems based on vanadium dioxide films. Such systems are dynamic in nature and present a more sophisticated and potentially more beneficial approach to reducing energy demand than static systems such as low emissivity and solar control coatings. The ability to be able to tune some of the material parameters in order to optimize the film performance for a given climate provides exciting opportunities for future technologies. In this article, we review recent progress and challenges in these areas and provide a perspective for future trends and developments. Full article

Due to increasing pressure to reduce the energy demand in buildings, thermochromic thin film based glazing has become a recognized potential solution due to the intrinsic ability to modulate the solar heat gain of a window as a function of the materials temperature. These “intelligent” glazings have been investigated for several years, and it has been found that, through variation of synthetic route, the thermochromic properties (transition temperature, hysteresis gradient and width) can be altered; however, less attention has been applied to how such alterations affect the overall energy savings attributed to the materials. In this study the building simulation software EnergyPlus TM has been used to model a series of idealized thermochromic spectra in a series of different environments to evaluate their energy saving potential against both clear glass systems and industry standards. The idealized spectra are used to see what effect each of the materials thermochromic properties and therefore elucidate which are the most important with respect to the energy saving properties. It was found that the best thermochromic materials were those with a narrow sharp hysteresis and a low transition temperature and result in an increase in energy saving between 30%–45% across the different environments compared to clear glass systems. Full article

A composite metal oxide semiconductor (MOS) sensor array based on tin dioxide (SNO₂) and zinc oxide (ZnO) has been fabricated using a straight forward mechanical mixing method. The array was characterized using X-ray photoelectron spectroscopy, scanning electron microscopy, Raman spectroscopy and X-ray diffraction. The array was evaluated against a number of environmentally important reducing and oxidizing gases across a range of operating temperatures (300–500 °C). The highest response achieved was against 100 ppm ethanol by the 50 wt% ZnO–50 wt% SnO₂ device, which exhibited a response of 109.1, a 4.5-fold increase with respect to the pure SnO₂ counterpart (which displayed a response of 24.4) and a 12.3-fold enhancement with respect to the pure ZnO counterpart (which was associated with a response of 8.9), towards the same concentration of the analyte. Cross sensitivity studies were also carried out against a variety of reducing gases at an operating temperature of 300 °C. The sensors array showed selectivity towards ethanol. The enhanced behaviour of the mixed oxide materials was influenced by junction effects, composition, the packing structure and the device microstructure. The results show that it is possible to tune the sensitivity and selectivity of a composite sensor, through a simple change in the composition of the composite. Full article

Titanium dioxide thin films were deposited using a Tween^® surfactant modified non-aqueous sol-gel method onto fluorine doped tin oxide glass substrates. The surfactant concentration and type in the sols was varied as well as the number of deposited layers. The as deposited thin films were annealed at 500 °C for 15 min before characterisation and photocatalytic testing with resazurin intelligent ink. The films were characterised using scanning electron microscopy, atomic force microscopy, X-ray diffraction, Raman spectroscopy and UV-Vis spectroscopy. Photocatalytic activity of the films was evaluated using a resazurin dye-ink test and the hydrophilicity of the films was analysed by water-contact angles measurements. Characterisation and photocatalytic testing has shown that the addition of surfactant in varying types and concentrations had a significant effect on the resulting thin film microstructure, such as changing the average particle size from 130 to 25 nm, and increasing the average root mean square roughness from 11 to 350 nm. Such structural changes have resulted in an enhanced photocatalytic performance for the thin films, with an observed reduction in dye half-life from 16.5 to three minutes. Full article

Metal oxide semiconductor gas sensors are utilised in a variety of different roles and industries. They are relatively inexpensive compared to other sensing technologies, robust, lightweight, long lasting and benefit from high material sensitivity and quick response times. They have been used extensively to measure and monitor trace amounts of environmentally important gases such as carbon monoxide and nitrogen dioxide. In this review the nature of the gas response and how it is fundamentally linked to surface structure is explored. Synthetic routes to metal oxide semiconductor gas sensors are also discussed and related to their affect on surface structure. An overview of important contributions and recent advances are discussed for the use of metal oxide semiconductor sensors for the detection of a variety of gases—CO, NOx, NH3 and the particularly challenging case of CO₂. Finally a description of recent advances in work completed at University College London is presented including the use of selective zeolites layers, new perovskite type materials and an innovative chemical vapour deposition approach to film deposition. Full article