Additive Manufacturing of Ferrous Materials (Editors: Pavel Krakhmalev, Igor Yadroitsev)
Advanced Mechanical Testing of Powder Metallurgy Alloys (Editor: Paul Bishop)
Advances in Acoustic Emission Testing of Metals and Alloys (Editors: Alexei Vinogradov, Antolino Gallego)
Advances in Hydrometallurgy (Editor: Alexandre Chagnes)
Advances in Low-carbon and Stainless Steels (Editors: Nima Haghdadi, Mahesh Somani)
Advances in Microalloyed Steels (Editor: Pello Uranga)
Advances in Synthesis of Metallic, Oxidic and Composite Powders (Editors: Srecko Stopic, Bernd Friedrich)
Alloy Design (Editors: Russell Goodall, Zhaoyuan Leong)
Alloys for High-Temperature Applications (Editor: Giulio Timelli)
Assessment of Multifunctional Nanostructured Coatings/Metal Interfaces in Extreme Environments (Editor: Homero Castaneda)
Bearing Steels (Editor: Pedro E. J. Rivera-Diaz-del-Castillo)
Biomedical Applications of Metallic and Metal Oxide Nanoparticles (Editor: Alexandru Mihai Grumezescu)
Casting and Forming of Advanced Aluminum Alloys (Editor: Hélder Puga)
Cermets and Hardmetals (Editor: Kevin Plucknett)
Complex Concentrated Alloys (CCAs) - Current Understanding and Future Opportunities (Editor: Sundeep Mukherjee)
Computational Methods in Manufacturing Processes (Editors: Carlos Agelet de Saracibar, Eric Feulvarch, Jean-Philippe Ponthot)
Constitutive Modelling for Metals (Editors: Robertt Valente, Myoung-Gyu Lee)
Continuous Casting of Steel (Editor: Michael Vynnycky)
Creep and High Temperature Deformation of Metals and Alloys (Editors: Stefano Spigarelli, Elisabetta Gariboldi)
Deformation Behavior of the Alloys under Simple and Combined Loading Conditions at Various Deformation Rate (Editors: Takeshi Iwamoto, Tao Suo)
Deformation-Induced Phase Transformations in Steels and Non-Ferrous Alloys (Editors: Elena Pereloma, Ilana Timokhina)
Development of Bainitic Steels (Editor: Thomas Sourmail)
Diffusion Bonding and Brazing of Advanced Materials (Editor: Sónia Simões)
Diffusion Bonding of Metals (Editor: Thomas Gietzelt)
Dissimilar Metal Welding (Editors: Pierpaolo Carlone, Antonello Astarita)
Dynamic Recrystallization Behavior of Metallic Materials (Editors: Roland E. Logé, Ke Huang)
Electrochemical Deposition (Editor: Giovanni Zangari)
Failure Analysis of Biometals (Editor: Reza H Oskouei)
Fatigue and Fracture Behavior of Joining Methods for Lightweight and High Strength Materials (Editor: J. Brian Jordon)
Fatigue and Wear for Steels (Editor: Sabine Weiß)
Fatigue Damage of Additively-Manufactured Metallic Materials (Editor: Matteo Benedetti)
Fatigue of Intermetallics (Editor: Gilbert Hénaff)
First-Principles Approaches to Metals, Alloys, and Metallic Compounds (Editor: Richard Dronskowski)
Friction Stir Welding and Processing in Alloy Manufacturing (Editor: Carlos Agelet de Saracibar)
Functionally Graded Materials (Editors: Francisco Manuel Braz Fernandes, Alexandre José da Costa Velhinho, Rui Jorge Cordeiro Silva)
Heat Treatment of Aluminum Alloys (Editor: Salem Seifeddine)
Heusler Compounds (Editor: Philippe Jund)
High Temperature Materials Development beyond Ni-Base Superalloys (Editors: Debashis Mukherji, Pavel Strunz)
High-Temperature Corrosion and Oxidation of Metals (Editors: Raman Singh, Mahesh B. Venkataraman)
Hydrogen Embrittlement of Metallic Materials: Past, Present and Future (Editor: Jesús Toribio)
Hydrogen Storage Alloys (Editor: Kwo Young)
In Situ X-Ray Diffraction on Metals and Alloys (Editor: Guillaume Geandier)
Intermetallic Alloys (Editor: Takayuki Takasugi)
Ironmaking and Steelmaking (Editors: Zushu Li, Claire Davis)
Kinetic Surface Treatments (Editors: Mario Guagliano, Sara Bagherifard)
Laser Metal Deposition (Editor: Patrice Peyre)
Laser Shock Processing and Related Phenomena (Editor: José L. Ocaña)
Laser Welding (Editors: João Pedro Oliveira, Zhi Zeng)
Laser Welding of Industrial Metal Alloys (Editor: Jose Maria Sánchez-Amaya)
Leaching Kinetics of Valuable Metals (Editor: Stefano Ubaldini)
Machinability of Titanium Alloys (Editor: Mohammed Nouari)
Machining and Finishing of Nickel and Titanium Alloys (Editors: Naiara Ortega, Luis Norberto López de Lacalle)
Martensitic Transformation in Shape Memory Alloys (Editors: Jaume Pons, Joan Torrens-Serra)
Material and Process Design for Lightweight Structures (Editor: Talal Al-Samman)
Mechanical Alloying 2018 (Editor: Chun-Liang Chen)
Medium-Mn Steels, a Promising Type of the 3rd Generation Steels (Editor: L. Pentti Karjalainen)
Metal and Metal-Oxide Film Deposition (Editors: Marcus P. Rutner, Michael Störmer)
Metallic Films: From Nanofabrication and Nanostructuration to Characterizations and Applications (Editor: Francesco Ruffino)
Metallic Glasses: Pathways to Viable Applications (Editor: Eun Soo Park)
Metallic Materials and Manufacturing (Editor: Denni Kurniawan)
Metallic Materials under Dynamic Loading (Editors: Alexis Rusinek, Piotr Sielicki)
Metallic Scaffolds for Medical Applications (Editor: Mieczyslaw Jurczyk)
Metals in Hydrogen Technology (Editor: Claudio Pistidda)
Metals Machining – Recent Advances in Experimental and Modeling of the Cutting Process (Editor: Badis HADDAG)
Microbes Meet Metals (Editor: Anna Kaksonen)
Microstructure and Mechanical Properties of Casting Alloys (Editor: Annalisa Pola)
Microstructure and Mechanical Properties of Metallic Alloys Produced by Additive Manufacturing (Editor: Maurizio Vedani)
Microstructure and Mechanical Properties of Structural Metals and Alloys (Editor: Andrey Belyakov)
Microstructure, Texture and Properties Control in Alloys (Editors: Roumen Petrov, Leo Kestens)
Modelling and Simulation of Sheet Metal Forming Processes (Editors: Marta Oliveira, José Valdemar Fernandes)
Modern Aerospace Materials (Editor: Guillermo Requena)
Modern Steels and Iron Alloys 2018 (Editors: Wiesław Świątnicki , Dawid Myszka)
Molten Salts and Molten Metals (Editor: Yitzhak Marcus)
Nanoporous Metals (Editor: Takeshi Fujita)
Nanostructured Surfaces in Metallic Biomaterials (Editor: Mieczyslaw Jurczyk)
Non-Ferrous Metallic Materials (Editor: Tomasz Tański)
Novel Magnetic Alloys (Editor: Parashu Kharel)
Optimization of Industrial Casting Processes (Editor: Steve Cockcroft)
Oxide Dispersion Strengthened Steels (Editor: Shigeharu Ukai)
Phase Transformations in Alloy Processing (Editor: Ralph E. Napolitano)
Physical Metallurgy of High Performance Steels (Editor: Dong-Woo Suh)
Plasma Electrolytic Oxidation (Editor: Tadeusz Hryniewicz)
Plasmas Processes Applied on Metals and Alloys (Editors: Jian-Zhang Chen, Shih-Hang Chang)
Porous Metals and Metallic Foams (Editor: Afsaneh Rabiei)
Powder Metallurgy of Titanium Alloys (Editor: Elena Gordo)
Processing of Metal Matrix Composites (Editors: Anne Mertens, Marie-Noëlle Avettand-Fènoël)
Processing-Structure-Property Relationships in Metals (Editors: Roberto Montanari, Alessandra Varone)
Production and Properties of Light Metal Matrix Nanocomposites (Editor: Hajo Dieringa)
Radiation Effects in Metals (Editor: Dhriti Bhattacharyya)
Rapid Solidification Processing (Editor: Andrew Mullis)
Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys (Editor: Giuseppe Casalino)
Researches and Simulations in Steel Rolling (Editor: Adam Grajcar)
Science, Characterization and Technology of Joining and Welding (Editor: Meysam Haghshenas)
Selected Papers from the 2nd International Conference on Light Materials LightMAT 2017 (Editors: Axel von Hehl, Jürgen Hirsch, Karl Ulrich Kainer, Christoph Leyens)
Semi-solid Processing of Alloys and Composites (Editors: Shahrooz Nafisi, Reza Ghomashchi)
Solvent Extraction of Critical Metals (Editors: Ana Paula Paiva, Gérard Cote)
Spark Plasma Sintering-A Key Technology towards the Development of New Materials (Editor: Massimo Pellizzari)
Surface Treatment Technology of Metals and Alloys (Editor: Krzysztof Rokosz)
Sustainable Utilization of Metals - Processing, Recovery and Recycling (Editor: Bernd Friedrich)
Synthesis and Properties of Metallic Multilayers (Editor: James E. Krzanowski)
Synthetic Metals 2019 (Editor: Bruno Schmaltz)
The Integration and Validation of Additive Layer Manufactured (ALM) Components (Editor: Mark Stanford)
Thermal Methods for Damage Evaluation of Metallic Materials (Editors: Umberto Galietti, Davide Palumbo)
Thermal Spray Processes: The Evolution of Equipment, Technology and Feedstock (Editors: Lech Pawlowski, Andreas Killinger, Filofteia-Laura Toma)
Titanium Alloys for Biomedical Implants and Devices (Editors: Hooyar Attar, Damon Kent)
Titanium Oxide Films for Energy Applications (Editors: Maria Vasilopoulou, Anastasia Soultati)
Transition Metals (Editor: Duc Nguyen-Manh)
Tungsten Composite Materials and New Alloys for Extreme Application (Editor: Jan Willem Coenen)
Wear and Fracture of Steel Manufacturing Apparatus and Tools (Editor: Nao-Aki Noda)
Zirconium Alloys (Editor: Wen Qin)