Next Article in Journal
Numerical Simulation of Drop Impact on Wetted and Dry Surfaces
Previous Article in Journal
Optimal Particle Size Distribution Control in a Pharmaceuticals Batch Dryer Using a Hybrid Genetic Algorithm-Pattern Search Optimization Strategy
Article Menu

Article Versions

Export Article

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2015). Articles in this Issue were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence. Articles are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Open AccessConference Report
Sci. Pharm. 2010, 78(3), 567; https://doi.org/10.3797/scipharm.cespt.8.LPES06 (registering DOI)

Combined Numerical Method for Multi-Scale Analysis of Tablet Coating Processes

1
Research Center Pharmaceutical Engineering, Graz, Austria
2
Institute for Process Engineering, Graz University of Technology, Graz, Austria
*
Author to whom correspondence should be addressed.
Received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010
PDF [103 KB, uploaded 29 September 2016]

Abstract

In the pharmaceutical industry spray coating is a frequently used method to apply a film layer on the surface of tablets or pellets. [...]
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

SUZZI, D.; TOSCHKOFF, G.; MACHOLD, D.; RADL, S.; KHINAST, J.G. Combined Numerical Method for Multi-Scale Analysis of Tablet Coating Processes. Sci. Pharm. 2010, 78, 567.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Sci. Pharm. EISSN 2218-0532 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top