Next Article in Journal / Special Issue
Assessment of Global Variability in UTBB MOSFETs in Subthreshold Regime
Previous Article in Journal / Special Issue
Study of Back Biasing Schemes for ULV Logic from the Gate Level to the IP Level
Article Menu

Export Article

Open AccessArticle
J. Low Power Electron. Appl. 2014, 4(3), 188-200; doi:10.3390/jlpea4030188

SOTB Implementation of a Field Programmable Gate Array with Fine-Grained Vt Programmability

Electroinformatics Group, Nanoelectronics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
Department of Information and Computer Science, College of Engineering, Kanazawa Institute of Technology, 7-1 Ohgigaoka, Nonoichi, Ishikawa 921-8501, Japan
Computer Science Course, Fundamental Science and Technology, Graduate School of Science and Technology, Meiji University, 1-1-1 Higashi-Mita, Tama-ku, Kawasaki-shi, Kanagawa 214-8571, Japan
This is an extended version of paper that was presented at the IEEE S3S Conference 2013.
Author to whom correspondence should be addressed.
Received: 28 February 2014 / Revised: 28 May 2014 / Accepted: 25 June 2014 / Published: 15 July 2014
(This article belongs to the Special Issue Selected Papers from IEEE S3S Conference 2013)
View Full-Text   |   Download PDF [1620 KB, uploaded 15 July 2014]   |  


Field programmable gate arrays (FPGAs) are one of the most widespread reconfigurable devices in which various functions can be implemented by storing circuit connection information and logic values into configuration memories. One of the most important issues in the modern FPGA is the reduction of its static leakage power consumption. Flex Power FPGA, which has been proposed to overcome this problem, uses a body biasing technique to implement the fine-grained threshold voltage (Vt) programmability in the FPGA. A low-Vt state can be assigned only to the component circuits along the critical path of the application design mapped on the FPGA, so that the static leakage power consumption can be reduced drastically. Flex Power FPGA is an important application target for the SOTB (silicon on thin buried oxide) device, which features a wide-range body biasing ability and the high sensitivity of Vt variation by body biasing, resulting in a drastic subthreshold leakage current reduction caused by static leakage power. In this paper, the Flex Power FPGA test chip is fabricated in SOTB technology, and the functional test and performance evaluation of a mapped 32-bit binary counter circuit are performed successfully. As a result, a three orders of magnitude static leakage reduction with a bias range of 2.1 V demonstrates the excellent Vt controllability of the SOTB transistors, and the 1.2 V bias difference achieves a 50× leakage reduction without degrading speed. View Full-Text
Keywords: field programmable gate array (FPGA); static leakage power reduction; fine-grained body biasing; silicon on thin buried oxide (SOTB) field programmable gate array (FPGA); static leakage power reduction; fine-grained body biasing; silicon on thin buried oxide (SOTB)

Figure 1

This is an open access article distributed under the Creative Commons Attribution License (CC BY 3.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Hioki, M.; Ma, C.; Kawanami, T.; Ogasahara, Y.; Nakagawa, T.; Sekigawa, T.; Tsutsumi, T.; Koike, H. SOTB Implementation of a Field Programmable Gate Array with Fine-Grained Vt Programmability. J. Low Power Electron. Appl. 2014, 4, 188-200.

Show more citation formats Show less citations formats

Article Metrics

Article Access Statistics



[Return to top]
J. Low Power Electron. Appl. EISSN 2079-9268 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top