Next Article in Journal
Influence of Short-Term Heat Treatment on the Mechanical Properties of Al–Mg–Si Profiles
Next Article in Special Issue
Improvement of Strength and Impact Toughness for Cold-Worked Austenitic Stainless Steels Using a Surface-Cracking Technique
Previous Article in Journal
New Technology to Produce 1 GPa Low Carbon Microalloyed Steels from Cast Strip
Previous Article in Special Issue
Crack Propagation Mechanisms for Creep Fatigue: A Consolidated Explanation of Fundamental Behaviours from Initiation to Failure
 
 
Article

Article Versions Notes

Metals 2018, 8(9), 663; https://doi.org/10.3390/met8090663
Action Date Notes Link
article xml file uploaded 24 August 2018 16:16 CEST Original file -
article pdf uploaded. 24 August 2018 16:16 CEST Version of Record https://www.mdpi.com/2075-4701/8/9/663/pdf-vor
article pdf uploaded. 24 August 2018 16:17 CEST Updated version of record https://www.mdpi.com/2075-4701/8/9/663/pdf-vor
article xml file uploaded 28 August 2018 06:23 CEST Update -
article xml uploaded. 28 August 2018 06:23 CEST Update https://www.mdpi.com/2075-4701/8/9/663/xml
article pdf uploaded. 28 August 2018 06:23 CEST Updated version of record https://www.mdpi.com/2075-4701/8/9/663/pdf
article html file updated 28 August 2018 06:24 CEST Original file -
article html file updated 26 September 2018 12:46 CEST Update -
article html file updated 31 March 2019 11:37 CEST Update -
article html file updated 15 April 2019 08:39 CEST Update -
article html file updated 29 April 2019 13:08 CEST Update -
article html file updated 7 October 2019 01:24 CEST Update -
article html file updated 10 February 2020 07:30 CET Update https://www.mdpi.com/2075-4701/8/9/663/html
Back to TopTop