Next Article in Journal
A Summary of Corrosion Properties of Al-Rich Solid Solution and Secondary Phase Particles in Al Alloys
Next Article in Special Issue
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Nitrogen-Alloyed High-Mn Austenitic Hot Work Die Steel
Previous Article in Journal
Primary Stability of Temporary Screws after Dentary and Orthopedic Forces under Static and Dynamic Load Cycles
Previous Article in Special Issue
Precipitation Behavior of Carbides in H13 Hot Work Die Steel and Its Strengthening during Tempering
 
 
Article

Article Versions Notes

Metals 2017, 7(3), 82; https://doi.org/10.3390/met7030082
Action Date Notes Link
article pdf uploaded. 6 March 2017 14:08 CET Version of Record https://www.mdpi.com/2075-4701/7/3/82/pdf
article xml uploaded. 6 March 2017 14:08 CET Original file https://www.mdpi.com/2075-4701/7/3/82/xml
article html file updated 6 March 2017 14:09 CET Original file -
article html file updated 6 March 2017 14:09 CET Update -
article html file updated 6 March 2017 14:10 CET Update -
article html file updated 28 March 2017 11:07 CEST Update -
article html file updated 4 May 2019 07:59 CEST Update -
article html file updated 23 September 2019 16:32 CEST Update -
article html file updated 8 February 2020 00:53 CET Update https://www.mdpi.com/2075-4701/7/3/82/html
Back to TopTop