Optimizing the Air Dissolution Parameters in an Unpacked Dissolved Air Flotation System
AbstractDue to the various parameters that influence air solubility and microbubble production in dissolved air flotation (DAF), a multitude of values that cover a large range for these parameters are suggested for field systems. An unpacked saturator and an air quantification unit were designed to specify the effects of power, pressure, temperature, hydraulic retention time, and air flow on the DAF performance. It was determined that a pressure of 621 kPa, hydraulic retention time of 18.2 min, and air flow of 8.5 L/h would be the best controlled parameters for maximum efficiency in this unit. A temperature of 7 °C showed the greatest microbubble production, but temperature control would not be expected in actual application. The maximum microbubble flow from the designed system produced 30 mL of air (±1.5) per L of water under these conditions with immediate startup. The maximum theoretical dissolved air volume of 107 mL (±6) was achieved at a retention time of 2 h and a pressure of 621 kPa. To isolate and have better control over the various DAF operational parameters, the DAF unit was operated without the unsaturated flow stream. This mode of operation led to the formation of large bubbles at peak bubble production rates. In a real-world application, the large bubble formation will be avoided by mixing with raw unsaturated stream and by altering the location of dissolved air output flow. View Full-Text
Share & Cite This Article
Dassey, A.; Theegala, C. Optimizing the Air Dissolution Parameters in an Unpacked Dissolved Air Flotation System. Water 2012, 4, 1-11.
Dassey A, Theegala C. Optimizing the Air Dissolution Parameters in an Unpacked Dissolved Air Flotation System. Water. 2012; 4(1):1-11.Chicago/Turabian Style
Dassey, Adam; Theegala, Chandra. 2012. "Optimizing the Air Dissolution Parameters in an Unpacked Dissolved Air Flotation System." Water 4, no. 1: 1-11.