Next Article in Journal
Light Manipulation in Inhomogeneous Liquid Flow and Its Application in Biochemical Sensing
Next Article in Special Issue
Effect of Process Parameters and Material Properties on Laser Micromachining of Microchannels
Previous Article in Journal
SF6 Optimized O2 Plasma Etching of Parylene C
Previous Article in Special Issue
Investigation of Micro-Bending of Sheet Metal Laminates by Laser-Driven Soft Punch in Warm Conditions
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386

by
Christos-Edward Athanasiou
* and
Yves Bellouard
Galatea lab, STI/IMT, Ecole Fédérale Polytechnique de Lausanne (EPFL), Rue de la Maladière, 71b, CH-2002 Neuchâtel, Switzerland
*
Author to whom correspondence should be addressed.
Micromachines 2018, 9(4), 164; https://doi.org/10.3390/mi9040164
Submission received: 12 March 2018 / Revised: 21 March 2018 / Accepted: 22 March 2018 / Published: 2 April 2018
(This article belongs to the Special Issue Laser Micromachining and Microfabrication)
The authors would like to make the following changes to the published paper [1]: Equation (5) should be written as follows:
F 6 w t E s i o 2 δ 4 3 δ l 3 6 w l 3 c o t h 3 2 ( δ w )
Equation (13) should be written as follows:
u σ = ( 1 C t ) 2 u R 2 + ( R C t 2 ) 2 u t 2
The changes do not affect the scientific results. We apologize for any inconvenience caused to the readers by these errors. The manuscript will be updated and the original will remain online on the article webpage, with a reference to this Correction.

Reference

  1. Athanasiou, C.E.; Bellouard, Y. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines 2015, 6, 1365–1386. [Google Scholar] [CrossRef]

Share and Cite

MDPI and ACS Style

Athanasiou, C.-E.; Bellouard, Y. Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386. Micromachines 2018, 9, 164. https://doi.org/10.3390/mi9040164

AMA Style

Athanasiou C-E, Bellouard Y. Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386. Micromachines. 2018; 9(4):164. https://doi.org/10.3390/mi9040164

Chicago/Turabian Style

Athanasiou, Christos-Edward, and Yves Bellouard. 2018. "Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386" Micromachines 9, no. 4: 164. https://doi.org/10.3390/mi9040164

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop