Department of Mechanical Engineering, Technical University of Denmark, Niels Koppels Allé, Building 404, 2800 Kgs. Lyngby, Denmark
Received: 30 September 2017 / Accepted: 30 September 2017 / Published: 2 October 2017
Note: In lieu of an abstract, this is an excerpt from the first page.
Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.[...]
This is an open access article distributed under the Creative Commons Attribution License
which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).
Share & Cite This Article
MDPI and ACS Style
Tosello, G. Micro/Nano Manufacturing. Micromachines 2017, 8, 297.
Tosello G. Micro/Nano Manufacturing. Micromachines. 2017; 8(10):297.
Tosello, Guido. 2017. "Micro/Nano Manufacturing." Micromachines 8, no. 10: 297.
Show more citation formats
Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.
[Return to top]
For more information on the journal statistics, click here
Multiple requests from the same IP address are counted as one view.