Next Article in Journal
Continuous Jetting of Alginate Microfiber in Atmosphere Based on a Microfluidic Chip
Next Article in Special Issue
Wrinkled Graphene–AgNWs Hybrid Electrodes for Smart Window
Previous Article in Journal
Preparation of Protein Nanoparticles Using NTA End Functionalized Polystyrenes on the Interface of a Multi-Laminated Flow Formed in a Microchannel
Previous Article in Special Issue
Materials, Mechanics, and Patterning Techniques for Elastomer-Based Stretchable Conductors
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Towards Flexible Transparent Electrodes Based on Carbon and Metallic Materials

1
College of Physics, Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006, China
2
Key Laboratory of Advanced Optical Manufacturing Technologies of Jiangsu Province & Key Laboratory of Modern Optical Technologies of Education Ministry of China, Soochow University, Suzhou 215006, China
*
Authors to whom correspondence should be addressed.
Micromachines 2017, 8(1), 12; https://doi.org/10.3390/mi8010012
Submission received: 1 November 2016 / Revised: 23 December 2016 / Accepted: 27 December 2016 / Published: 4 January 2017
(This article belongs to the Special Issue Flexible and Stretchable Electronics)

Abstract

:
Flexible transparent electrodes (FTEs) with high stability and scalability are in high demand for the extremely widespread applications in flexible optoelectronic devices. Traditionally, thin films of indium thin oxide (ITO) served the role of FTEs, but film brittleness and scarcity of materials limit its further application. This review provides a summary of recent advances in emerging transparent electrodes and related flexible devices (e.g., touch panels, organic light-emitting diodes, sensors, supercapacitors, and solar cells). Mainly focusing on the FTEs based on carbon nanomaterials (e.g., carbon nanotubes and graphene) and metal materials (e.g., metal grid and metal nanowires), we discuss the fabrication techniques, the performance improvement, and the representative applications of these highly transparent and flexible electrodes. Finally, the challenges and prospects of flexible transparent electrodes will be summarized.

1. Introduction

Flexible transparent electrodes (FTEs) are essential components for numerous flexible optoelectronic devices due to their excellent capacity for transparency and flexibility, including organic light-emitting diodes [1,2,3,4,5,6], solar cells [7,8,9,10,11,12], touch panels [13,14], and wearable devices [15]. Conventionally, transparent conductive oxides (TCO) such as the indium tin oxide films (ITO), fluorine doped tin oxide (FTO) [16], ZnO:Al (AZO) [17], and ZnO:Ga (GZO) [18,19] have governed the domain of optoelectronic devices for several decades. However, some innate drawbacks of the TCO films such as brittleness due to its ceramic nature [20] and high cost for the scarcity of materials such as indium limit the widespread use in flexible devices, where stretching, twisting, or bending are usually requested. Recently, potential alternative materials to TCO have been widely explored, including ultra-thin metallic film [21,22], carbon-based nanomaterials (e.g., carbon nanotubes (CNTs) [23,24], and graphene [25,26,27,28]), conducting polymer [29,30], and metallic materials (e.g., metal grid [7,31,32] and metal nanowires [33,34,35,36,37]). To replace conventional TCO films, new types of FTEs should have low processing costs and mechanical flexibility while maintaining a low sheet resistance (Rs) and high optical transparency (T). As for FTEs based on conducting polymer, although the flexibility is improved, low conductivity and T limit their optoelectronic performance, and stability in ambient atmosphere is not good enough. Commonly, CNTs with percolating networks cannot process a low Rs and a high T simultaneously. The low conductivity of the CNTs remains the main limiting factor of the overall conductivity. For example, to achieve an Rs of the CNTs based FTE less than 10 Ω□−1, the T will decrease drastically because the required thickness of CNTs exceeds 100 nm [38]. There remain challenges to improve the electrical conductivity of CNT-based FTEs.
Monolayer graphene only absorbs 2.3% of visible light and can sustain 4% strain with negligible cracking [39,40]. The theoretical Rs of the graphene is as low as 30 Ω□−1 [41]. However, the Rs of synthesized graphene usually exceeds several hundred Ω□−1 using different synthesis methods (e.g., epitaxial grown graphene on silicon carbide, chemical vapor (CVD) deposited on Cu catalysts), due to lower quality graphene with polycrystalline structures and plenty of defects [42,43].
Metallic based FTEs constructed from random networks of nanowires or regular metal grids regarded as another potential alternative to TCO, due to their better Rs-T performance than other alternatives. The metal nanothough networks can obtain a FTE with Rs of 2 Ω□−1 at a transmittance of 90% [44]. In addition, the fabrication of metal structures coincides with printing and roll-to-roll technology, which reduces the cost for mass-production of FTEs significantly. However, the stability of the metal-based FTEs needs to be investigated further.
In this review, we provide a summary of recent advances in emerging FTEs and related flexible optoelectronic devices, mainly focusing on works reported in the past three years. For early work on FTEs, readers can refer to the review by Hecht et al. [45] and Ellmer et al. [46]. Carbon-based nanomaterials and metallic nanomaterials are promising to replace the dominance of the TCO films due to their superior performance, which will be the focus of our review. Then, we discuss the fabrication techniques, the performance improvement, and the representative applications of these FTEs. The challenges and prospects of the FTEs will eventually be summarized.

2. Currently Emerging Materials

Among those emerging alternatives, carbon-based materials and metallic materials are considered promising candidates for next-generation FTEs, due to their high mechanical flexibility paralleling good optical transparency and electrical conductivity. The material properties, combined with low material costs and fabrication techniques, make these emerging materials very attractive for FTEs.

2.1. One-Deminsional CNT-Based Nanomaterials

Carbon nanotubes (CNTs) have been evaluated and verified as one of the future FTEs relying on their remarkable characteristics. In the past several years, transparent, conductive, and flexible CNT-based FTEs have been investigated widely, involving many applications (e.g., OLED and supercapacitor). They can be fabricated using different methods [47,48,49], including wet and dry processing, which could be further exploited by combination with the roll-to-roll process. Both single-walled CNTs (SWCNTs) and multiwalled CNT (MWCNT)-based FTEs have been fabricated via solution approaches [24,50,51]. In detail, the SWCNT powders made from the CVD process are centrifuged to remove large conglomerations, before blending into an SWCNT solution. After that, the FTEs can be fabricated by various methods with the solution, including spray coating, dip-coating, and infiltration. Wu et al. have reported a simple process for the fabrication of FTEs using pure SWCNTs [52]. Low sheet resistance of 30 Ω□−1 was obtained with 90% transmittance. However, owing to the SWCNTs tendency of twining during the CVD process, only a small part of them can be efficiently used, which increases the production costs.
To explore cost-effective method, Feng et al. employed a straightforward roll-to-roll process to fabricate flexible and stretchable MWCNT films as FTEs, where the CNTs possess excellent performance with low sheet resistance (208 Ω□−1) and high transmittance (90%) [47]. In the work, CNT arrays are obtained by batch growth. Lin et al. reported polyaniline composite films incorporated with aligned MWCNTs, which were fabricated using an easy electrodeposition process [48]. Additionally, Recep et al. reported FTEs based on SWCNTs (Figure 1a), which exhibited an optical transmittance of 82% with 0.02 mg SWCNTs (Figure 1b). The supercapacitors fabricated by the SWCNT FTEs showed good capacity retention (94%) upon cycling over 500 times (Figure 1c) [49].

2.2. Two-Dimensional Graphene-Based Nanomaterials

Graphene, a two-dimensional carbon allotrope, becomes a popular material for transparent electrodes due to the excellent performance [25,53,54]. Generally, the Rs of synthesized graphene usually exceed several hundred Ω□−1 [42,43]. To improve the photoelectric performance, combing graphene with other conductors is an effective method.
Liu et al. prepared the graphene/ITO flexible hybrid transparent electrode, which showed excellent mechanical and optoelectronic characteristics [55]. Figure 2a shows the optical image of the graphene/ITO hybrid electrode. The SEM image shows the surface of ITO bridges on left and right sides as well as the graphene film upon them. Figure 2b is the transmittance spectra of the samples on the PET substrate. Besides, combination of graphene with metal materials can significantly improve the optoelectronic performance. The metal materials and the graphene offer extra conductive paths for each other. Qiu et al. reported the combination of the metal grid with graphene oxide films via a facile, green, and room-temperature method [56]. The excellent photoelectric properties with the sheet resistance of 18 Ω□−1 and the transmittance of 80% can be obtained. Hong et al. demonstrated omnidirectionally stretchable and transparent graphene electrodes with good mechanical durability and performance reliability (Figure 2c) [57]. The multilayered graphene based FTE exhibits a transmittance of 87.1% at 550 nm (Figure 2d). Figure 2e,f show that sheet resistances of the graphene/PDMS film systematically monitored under various bending and stretching conditions, respectively. The textured graphene/PDMS film sustains its electrical properties when the film is folded with a bending radius (r) as small as r = 0.5 mm or stretched up to 30% of the tensile strain. Deng et al. developed a full roll-to-roll production of FTEs based on metal NWs (AgNWs and CuNWs) encapsulated by a monolayer graphene film, as shown in Figure 3a–c [26]. The Rs of the encapsulated NWs film show a 60%–90% decrease relative to the pure one (Figure 3d), which is due to the graphene conduction channel. Meanwhile, the encapsulated film processes lower Rs than pristine graphene because metal NWs provide additional conduction channels.
In addition to the graphene-based hybrid FTEs, doped graphene-based FTEs also exhibit good performance [41,58]. Bae et al. demonstrated roll-to-roll production and wet-chemical doping of predominantly monolayer 30-inch graphene films grown by CVD [41]. The doped graphene based FTEs have sheet resistances as low as ~125 Ω□−1 with 97.4% optical transmittance. Park et al. found that AuCl3 doping on graphene could improve the conductivity and shift the work function of the graphene FTEs, which results in improved power conversion efficiency of the OPV devices [58].

2.3. Metallic Materials

As mentioned above, the progress in carbon-based FTEs is exciting, but the Rs is still not low enough. For the realization of the next generation of flexible and large-area electronics, further improvement in Rs-T performance is required. Metal-based FTEs have gained prominence in both academic and industrial use in flexible electronics. Metal-based FTEs can be constructed from random distribution metallic NWs works [33,34,35,36,37] to regular metal grids [7,31,32], which have demonstrated great potential in optical transparency, electrical conductivity, and mechanical flexibility.

2.3.1. Random Distribution Metallic NWs as FTEs

Most metals have excellent electrical conductivity due to their high free-electron density. To utilize metal materials in FTEs, high transparency should be satisfied. Among common metallic nanomaterials, silver nanowires (AgNWs) are commerciogenic due to the excellent electrical conductivity and high transmittance in a broad wavelength range [33,34,35,36,37].
The fabrication of AgNW FTEs has been explored by many researchers in various fabrication processes [59], which can achieve a low Rs (8–50 Ω□−1) with a high transmittance (80%–98%). However, metal NW-based FTEs suffer from degradation of the Rs-T performance because of high junction resistances, which have been systematical investigated by several groups [60,61]. Mutiso et al. demonstrated that a higher NW aspect ratio could decrease the Rs while keeping the T a constant [61]. To obtain Rs ≤ 10 Ω□−1 at T = 90%, the aspect ratio should exceed 800 at a given junction resistance of 2 KΩ. Commonly, the strategies to reduce junction resistance involve bulk heating [62], plasmonic treatment [63], and chemical modifications [64], which tend to damage the plastic substrate and are not suitable for flexible applications. Therefore, other additional processes are introduced to produce hybrid structure electrodes. For example, Xiong et al. exhibited electroless-welding of an AgNW network coated with conductive ion gel that significantly reduces junction resistance between AgNWs, while its effect on the T of the FTEs (Rs of 8.4 Ω□−1 at T = 86%) is negligible [65].
In addition, the material of AgNWs exhibits the limitation of high surface roughness, which leads to low carrier transport. Currently, AgNW-based composite materials have become promising materials as FTEs, exhibiting excellent optical and electric properties [34,66]. Lee et al. reported a percolating network of AgNWs with densities above the percolation threshold integrated into graphene as hybrid FTEs [67]. The hybrid structure can reduce Rs down to 33 Ω□−1 with a transmittance of 94%. Other research groups demonstrated the combination of an AgNW network with graphene or graphene oxide could enhance electrical conductivity and decrease surface roughness [68,69,70]. Xu et al. mixed Ag NWs with graphene oxide and obtained Ag-doped graphene fibers, whose electrical conductivity increased from 4.1 × 104 S/m to 9.3 × 104 S/m, exhibiting a 330% enhancement factor [71]. Meanwhile, chemical and thermal stabilities also can be further improved. It is obvious that the composite materials enhance electrical properties of FTEs by decreasing junction resistance or providing new conductive pathways.
Not merely AgNWs, copper NWs (CuNWs) and gold NWs (AuNWs) are promising candidates for FTEs, due to the similarly excellent conductivity (Figure 4a–c) [34,72,73]. Cui et al. have reported a new synthetic approach for obtaining ultrathin high-quality CuNWs (Figure 4b), where oleylamine is used as a coordinating ligand [72]. Maurer et al. have demonstrated that ultrathin AuNWs can be synthesized at room temperature [73]. Triisopropylsilance (TIPS, 2 mL) is added into the solution after the gold salt was completely dissolved. The AuNWs will format standing for two days until the color turns from yellow into dark-red (Figure 4c). A high transparency of 79% can be achieved and maintained over 80 stretching cycles.

2.3.2. Metal Grids

The randomly dispersed network in the whole scale cannot be used immediately as prepared. Subsequently, patterning processes are necessarily adopted depending on different device architectures. In particular, metal grid FTEs offer advantages over other NW FTEs due to the nature of artificial design. For example, the electrical and optical properties can be managed by modulating the grid pitch, width, and thickness.
Uniform metal grids as FTEs fabricated by many processes, including nano-patterning techniques such as photolithography, crackle, electroless plating, nano-transfer printing, and electrospinning [74,75,76,77,78]. Almost all of these processes involve deposition of a metal film onto a template to form inter-connected network excluding junction resistance. In contrast to the limited material choices for NWs, a variety of metallic materials can be exploited in different applications. Cui et al. employed electrospun and metal deposited technique to generate nanotrough networks. Correspondingly, the width and thickness of the networks are 420 nm and 80–100 nm, respectively. The new kind FTEs exhibited both superior optoelectronic performance (Rs of 2 Ω□−1 at 90% transmission) (Figure 5a) and remarkable mechanical flexibility (Figure 5b,c) [44]. The Rs-T performance achieved is much better than that of TCO, carbon-based materials, or solution processed mental NWs networks.
In another work, Han et al. proposed the cracked TiO2 gel film as a template to make Ag networks [75]. The Ag networks with diameters of 1–2 μm, and widths of 4–100 μm, exhibited good electro-optical properties. The transmittance ranges from 82% to 45%, and correspondingly the Rs ranges from 4.2 Ω□−1 to 0.5 Ω□−1. To further improve the Rs-T performance of the NWs based FTEs, Hsu et al. introduced a mesoscale metal-wire concept in conjunction with NWs [78]. The mesoscale metal-wire networks show the extraordinary Rs-T performance with the Rs being 0.36 and the T being 92%. However, fabricating metal grid FTEs usually employs the physical deposition of metal materials involving thermal evaporation or sputtering, which requires expensive vacuum-based processing. Therefore, the fabrication process is not simple and cost-effective.
Recently, electrohydrodynamic (EHD) jet printing employed to fabricate metal grid FTEs [31,79]. Lee et al. fabricated FTEs by thermal pressing of metal lines, which was provided by EHD jet printing [31]. The excellent properties have been demonstrated with the sheet resistance of 0.5 Ω□−1 at the transmittance of 80%. Seong et al. have reported a method of fabricated FTEs by EHD jet printing. Sheet resistance of 1.49 Ω□−1 can be achieved by printing the Ag mesh on the convex glass [79]. Another route utilized to fabricate FTE by using inject printing [80]. Mohl et al. obtained grid meshes by inject printing and subsequent chemical copper plating [32]. The printed metal grids from reactive ink plated with copper can create high performance FTEs. The achieved Rs is 10 Ω□−1 and transmittance is 80%.
A novel fabrication method via hybrid printing technique has been demonstrated for FTEs with embedded metal grids [81]. Cui et al. developed high-resolution metal mesh as FTEs by nanoimprinting technology [14]. The silver nanoparticle inks embedded into the metal mesh, where the metal mesh was fabricated by the roll-to-roll progress. Low-cost fabrication is the most important advantage of this new approach. Moreover, high performance could be obtained with the low sheet resistance of 0.69 Ω□−1 at 88% transparency. Most important is that the fabrication cost can be further decreased by exploiting their compatibility with printing technologies, attributing to the efficient use of material, a simple fabrication process, and easy scalability to large scale. In addition, Kiruthika et al. employed the roll and spray coating methods to fabricate the FTEs by a simple solution process using crackle lithography [82]. A transmittance of 78% and sheet resistance of ~20 Ω□−1 can be obtained (Figure 6a). Figure 6b shows the optical micrographs of Ag meshes with different widths on PET substrate. Figure 6c–f exhibits the mechanical stability of the metallized Ag in the crackle network. The mesh was subjected to 500 bending cycles with 1.5 mm radius, the change in the resistance remained within 5%.
Finally, some typical values of sheet resistance and transmission of the novel FTEs up to date are summarized in Figure 7. Great progress has made in FTEs towards lower sheet resistance and high transmittance.

3. Applications

Based on the excellent mechanical compliance, high transmittance, and electric conductivity, the FTEs can be utilized in many essential applications, including supercapacitor, OLED, solar cell, and touch panel [45,46]. Different performances are needed for different applications, due to the requirement of technical indexes [60]. To satisfy the requirement of touch screens, the Rs of FTE should range from 100 Ω□−1 to 1000 Ω□−1, a T exceeds 85% combined with low haze. The FTEs must have the Rs ~ 10 Ω□−1 for T > 90% to provide solar cells and OLEDs. In addition, for use of FTEs in flexible optoelectronics, several requirements must be met, including the reduced haze value for the optical transparency, and ultra-smooth surface of the electrode to avoid the disconnection problem. Finally, a simple, low-cost, and large-scale process in fabricating FTEs is a necessity for commercial applications.
To function as an FTE in OLEDs, the metal-based electrodes must alleviate the leakage current by planarizing its surface. Zhou et al. investigated embedded Ag-grid FTEs as the anode of OLED, which exhibits a power efficiency of 106 lm·W−1 at 1000 cd·m−2 (Figure 8) [1].
Liu et al. reported a composite electrode developed from poly (3,4-ethylenedioxythiophene): poly (styrenesulfonate) (PEDOT: PSS) and AgNWs with a template stripping method [3]. The efficiency of the resultant OLEDs improved by 25% compared to that of traditional PEDOT: PSS FTEs, attributing to the reduction of surface roughness and the improvement of electric conductivity. Ok and co-worker developed an ultra-thin and smooth FTE by embedding AgNWs in a colorless polymide (cPI) [2]. The AgNWs-cPI composite electrode exhibited a T > 80%, a low Rs of 8 Ω□−1, and ultra-smooth surfaces comparable to glass (4.1 nm), as shown in Figure 9a. The OLEDs fabricated from such composite electrodes showed a stable performance with a luminance reduction of <3% after 10 repeated bendings at a radius of 30 μm (Figure 9b).
For applications in display devices and touch screens, high visibility is needed. Haze property is a vital value to the display industry. Ag networks that are fabricated by cracked template and AgNWs solution processed methods [75,83] can survive multiple finger touchings. The low Rs (<10 Ω□−1) and the large area fabrication are rapidly improving in the large format touch panels market. Currently, iV-touch can offer large projected capacitive touch panels from 21.5″ to 55″ with stunning touch performance [84].
Similar to the case of OLEDs, the application of NW networks and metal grids as the TCEs employed in functional organic solar cells. In order to achieve the required Rs (<50 Ω□−1) and T (>90%), constructing hybrid structured FTEs is a promising technology. Singh et al. demonstrated solution processed solar cells employing AgNW film binding with a 40 nm thin overlayer of sputtered ZnO as FTEs [85]. The ZnO overlayer is used to increase adhesion between AgNW and ZnO/buffer layer and to interconnect the AgNWs junctions. More recently, Li et al. integrated embedded Ag grids and conducting polymer hybrid electrodes into a perovskite-based photovoltaic cell and demonstrated an ultrathin flexible device delivering a power conversion efficiency of 14.0% [7]. Wu et al. demonstrated AgNW grids with multi-length scaled structures as FTEs for an organic solar cell [86]. A power conversion efficiency of 9% was achieved for the organic solar cell devices.
Transparent supercapacitors have been proposed in the past decade, which function both as a current collector to transport the electrons, and an active material to store electrochemical energy. For the application in supercapacitors, Lin et al. has synthesized polyaniline composite film incorporated with aligned MWCNTs through an easy electrodeposition process [48]. The conductive films are sufficiently used to fabricate transparent, flexible, and efficient supercapacitors with a maximum specific capacitance of 233 F/g at a current density of 1 A/g. Cai et al. demonstrated that the electrochemical stability of Ag grid FTEs can be enhanced by coating one layer of PEDOT:PSS [87]. The film sustained an optical modulation and a specific capacitance of 87.7% and 67.2% at 10 A·g−1, respectively. Cheng et al. reported hybrid electrodes composed of PEDOT:PSS and Ag-grids prepared via inject printing [88]. The hybrid structures not only compensated for the shortcomings of the single materials but also fully combined their advantages. The comparatively high Ct (capacitance of the supercapacitor) and Csc (capacitance of the electrode) of the supercapacitor based on PEDOT: PSS (three layers)/Ag grid electrodes were 1.13 mF·cm−2 and 4.52 mF·cm−2, respectively. In addition, Lee et al. have introduced a highly flexible and transparent supercapacitor based on electrochemically stable Ag-Au core-shell (AACS) nanowire percolation network electrode (Figure 10) [89]. Figure 10c confirms that the AACS NW networks possess superior optical transparency, exceeding 85% in the entire range of the visible wavelength. Figure 10d shows strain-dependent electrical resistance of Ag–Au core–shell NW electrode on an elastic PDMS substrate.
The various applications make carbon-based and metal-based FTE one of the most promising materials in optoelectronic devices. Considering the progress and the ongoing efforts on FTEs, there is no doubt that performance of these FTE-based flexible devices (OLED, OSC, supercapacitor, touch screen) can be further improved, and the new applications can served to an amazing degree.

4. Conclusions and Challenges

In conclusion, a comprehensive overview on recent developments and achievements in carbon-based and metal-based FTEs and related flexible optoelectronic devices is provided in this review. Carbon-based materials and metallic materials are promising to dominate the FTEs, especially hybrid FTEs exhibiting superior properties. Although outstanding performances—including low sheet resistance, high transmittance, and good mechanical properties—have been demonstrated, there are still many restrictions hindering large-scale fabrication. In addition, more exploration in the microcosmic aspect and the fundamental theories are needed. The present FTEs already play a significant role in many optical and electric applications, which urges more studies to improve the performance (stretchability, flexibility, transmittance, stability, and electric conductivity) from the material synthesis to device fabrication.

Acknowledgments

This work is supported by the National Natural Science Foundation of China (NSFC) (61405133, 61505131, 91323303), and by the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20133201120027), and by the Natural Science Foundation of Jiangsu Province (No. BK20140348, BK20150309), and by the China Postdoctoral Science Foundation (Grant No. 2015M571816), and by a project funded by the Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions.

Author Contributions

Minghui Luo gathered information and wrote the first draft of this review. Yanhua Liu supervised and amended this review. Wenbin Huang, Wen Qiao, Yun Zhou, and Yan Ye were auxiliary for perfecting this work. Lin-Sen Chen supervised and supported the work. All authors reviewed the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Zhou, L.; Xiang, H.Y.; Shen, S.; Li, Y.Q.; Chen, J.D.; Xie, H.J.; Goldthorpe, I.A.; Chen, L.S.; Lee, S.T.; Tang, J.X. High-performance flexible organic light-emitting diodes using embedded silver network transparent electrodes. ACS Nano 2014, 8, 12796–12805. [Google Scholar] [CrossRef] [PubMed]
  2. Ok, K.H.; Kim, J.; Park, S.R.; Kim, Y.; Lee, C.J.; Hong, S.J.; Kwak, M.G.; Kim, N.; Han, C.J.; Kim, J.W. Ultra-thin and smooth transparent electrode for flexible and leakage-free organic light-emitting diodes. Sci. Rep. 2015, 5, 9464. [Google Scholar] [CrossRef] [PubMed]
  3. Liu, Y.S.; Feng, J.; Ou, X.L.; Cui, H.F.; Xu, M.; Sun, H.B. Ultrasmooth, highly conductive and transparent PEDOT:PSS/silver nanowire composite electrode for flexible organic light-emitting devices. Org. Electron. 2016, 31, 247–252. [Google Scholar] [CrossRef]
  4. Lee, H.; Lee, D.; Ahn, Y.; Lee, E.W.; Park, L.S.; Lee, Y. Highly efficient and low voltage silver nanowire-based OLEDs employing a n-type hole injection layer. Nanoscale 2014, 6, 8565–8570. [Google Scholar] [CrossRef] [PubMed]
  5. Yun, S.O.; Hwang, Y.; Park, J.; Jeong, Y.; Kim, S.H.; Noh, B.I.; Jung, H.S.; Jang, H.S.; Hyun, Y.; Choa, S.H. Sticker-Type Alq 3-Based OLEDs Based on Printable Ultrathin Substrates in Periodically Anchored and Suspended Configurations. Adv. Mater. 2013, 25, 5626–5631. [Google Scholar] [CrossRef] [PubMed]
  6. Meng, H.; Luo, J.; Wang, W.; Shi, Z.; Niu, Q.; Dai, L.; Qin, G. Top-Emission Organic Light-Emitting Diode with a Novel Copper/Graphene Composite Anode. Adv. Funct. Mater. 2013, 23, 3324–3328. [Google Scholar] [CrossRef]
  7. Li, Y.; Meng, L.; Yang, Y.; Xu, G.; Hong, Z.; Chen, Q.; You, J.; Li, G.; Yang, Y.; Li, Y. High-efficiency robust perovskite solar cells on ultrathin flexible substrates. Nat. Commun. 2016, 7. [Google Scholar] [CrossRef] [PubMed]
  8. Kim, B.J.; Dong, H.K.; Lee, Y.Y.; Shin, H.W.; Sang, G.; Han, G.S.; Sug, J.; Mahmood, K.; Ahn, T.K.; Joo, Y.C. Highly efficient and bending durable perovskite solar cells: Toward a wearable power source. Energy Environ. Sci. 2014, 8, 916–921. [Google Scholar] [CrossRef]
  9. Shin, S.S.; Yang, W.S.; Noh, J.H.; Suk, J.H.; Jeon, N.J.; Park, J.H.; Ju, S.K.; Seong, W.M.; Sang, I.S. High-performance flexible perovskite solar cells exploiting Zn2SnO4 prepared in solution below 100 °C. Nat. Commun. 2015, 6. [Google Scholar] [CrossRef] [PubMed]
  10. Kranz, L.; Gretener, C.; Perrenoud, J.; Schmitt, R.; Pianezzi, F.; La, M.F.; Blösch, P.; Cheah, E.; Chirilă, A.; Fella, C.M. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil. Nat. Commun. 2013, 4, 1431–1442. [Google Scholar] [CrossRef] [PubMed]
  11. Li, Z.; Kulkarni, S.A.; Boix, P.P.; Shi, E.; Cao, A.; Fu, K.; Batabyal, S.K.; Zhang, J.; Xiong, Q.; Wong, L.H. Laminated Carbon Nanotube Networks for Metal Electrode-Free Efficient Perovskite Solar Cells. ACS Nano 2014, 8, 6797–6804. [Google Scholar] [CrossRef] [PubMed]
  12. Han, J.; Yuan, S.; Liu, L.; Qiu, X.; Gong, H.; Yang, X.; Li, C.; Hao, Y.; Cao, B. Fully indium-free flexible Ag nanowires/ZnO:F composite transparent conductive electrodes with high haze. J. Mater. Chem. A 2015, 3, 5375–5384. [Google Scholar] [CrossRef]
  13. Lee, J.; Lee, P.; Lee, H.B.; Hong, S.; Lee, I.; Yeo, J.; Lee, S.S.; Kim, T.S.; Lee, D.; Ko, S.H. Room-Temperature Nanosoldering of a Very Long Metal Nanowire Network by Conducting-Polymer-Assisted Joining for a Flexible Touch-Panel Application. Adv. Funct. Mater. 2013, 23, 4171–4176. [Google Scholar] [CrossRef]
  14. Cui, Z.; Gao, Y. 27.5L: Late-News Paper: Hybrid Printing of High Resolution Metal Mesh as A Transparent Conductor for Touch Panels and OLED Displays. SID Symp. Dig. Tech. Pap. 2015, 46, 398–400. [Google Scholar] [CrossRef]
  15. Wu, C.; Kim, T.W.; Li, F.; Guo, T. Wearable Electricity Generators Fabricated Utilizing Transparent Electronic Textiles Based on Polyester/Ag Nanowires/Graphene Core-Shell Nanocomposites. ACS Nano 2016, 10, 6449–6457. [Google Scholar] [CrossRef] [PubMed]
  16. Baek, W.H.; Choi, M.; Yoon, T.S.; Lee, H.H.; Kim, Y.S. Use of fluorine-doped tin oxide instead of indium tin oxide in highly efficient air-fabricated inverted polymer solar cells. Appl. Phys. Lett. 2010, 96, 133506. [Google Scholar] [CrossRef]
  17. Pei, Z.L.; Zhang, X.B.; Zhang, G.P.; Gong, J.; Sun, C.; Huang, R.F.; Wen, L.S. Transparent conductive ZnO:Al thin films deposited on flexible substrates prepared by direct current magnetron sputtering. Thin Solid Films 2005, 68, 20–23. [Google Scholar] [CrossRef]
  18. Assuncao, V.; Fortunato, E.; Marques, A.; Aguas, H.; Ferreira, I.; Costa, M.; Martins, R. Influence of the deposition pressure on the properties of transparent and conductive ZnO:Ga thin-film produced by r.f. sputtering at room temperature. Thin Solid Films 2003, 427, 401–405. [Google Scholar] [CrossRef]
  19. Abduev, A.; Akmedov, A.; Asvarov, A.; Chiolerio, A. A revised growth model for transparent conducting Ga doped ZnO films: Improving crystallinity by means of buffer layers. Plasma Process. Polym. 2015, 12, 725–733. [Google Scholar] [CrossRef]
  20. Gutruf, P.; Shah, C.M.; Walia, S.; Nili, H.; Zoolfakar, A.S.; Karnutsch, C.; Kalantarzadeh, K.; Sriram, S.; Bhaskaran, M. Transparent functional oxide stretchable electronics: Micro-tectonics enabled high strain electrodes. NPG Asia Mater. 2013, 5, 759–760. [Google Scholar] [CrossRef]
  21. Zhang, C.; Zhao, D.; Gu, D.; Kim, H.; Ling, T.; Wu, Y.K.R.; Guo, L.J. An Ultrathin, Smooth, and Low-Loss Al-Doped Ag Film and Its Application as a Transparent Electrode in Organic Photovoltaics. Adv. Mater. 2014, 26, 5696–5701. [Google Scholar] [CrossRef] [PubMed]
  22. Vj, L.; Kobayashi, N.P.; Islam, M.S.; Wu, W.; Chaturvedi, P.; Fang, N.X.; Wang, S.Y.; Williams, R.S. Ultrasmooth silver thin films deposited with a germanium nucleation layer. Nano Lett. 2009, 9, 178–182. [Google Scholar]
  23. Wang, X.; Li, Z.; Xu, W.; Kulkarni, S.A.; Batabyal, S.K.; Zhang, S.; Cao, A.; Wong, L.H. TiO2 nanotube arrays based flexible perovskite solar cells with transparent carbon nanotube electrode. Nano Energy 2015, 11, 728–735. [Google Scholar] [CrossRef]
  24. Jeon, I.; Cui, K.; Chiba, T.; Anisimov, A.; Nasibulin, A.G.; Kauppinen, E.I.; Maruyama, S.; Matsuo, Y. Direct and Dry Deposited Single-Walled Carbon Nanotube Films Doped with MoO(x) as Electron-Blocking Transparent Electrodes for Flexible Organic Solar Cells. J. Am. Chem. Soc. 2015, 137, 7982–7985. [Google Scholar] [CrossRef] [PubMed]
  25. Chen, Y.Z.; Medina, H.; Tsai, H.W.; Wang, Y.C.; Yen, Y.T.; Manikandan, A.; Chueh, Y.L. Low Temperature Growth of Graphene on Glass by Carbon-Enclosed Chemical Vapor Deposition Process and Its Application as Transparent Electrode. Chem. Mater. 2015, 27, 1636–1655. [Google Scholar] [CrossRef]
  26. Deng, B.; Hsu, P.C.; Chen, G.; Chandrashekar, B.N.; Liao, L.; Ayitimuda, Z.; Wu, J.; Guo, Y.; Lin, L.; Zhou, Y. Roll-to-Roll Encapsulation of Metal Nanowires between Graphene and Plastic Substrate for High-Performance Flexible Transparent Electrodes. Nano Lett. 2015, 15, 4206–4213. [Google Scholar] [CrossRef] [PubMed]
  27. Li, N.; Yang, G.; Sun, Y.; Song, H.; Cui, H.; Yang, G.; Wang, C. Free-Standing and Transparent Graphene Membrane of Polyhedron Box-Shaped Basic Building Units Directly Grown Using a NaCl Template for Flexible Transparent and Stretchable Solid-State Supercapacitors. Nano Lett. 2015, 15, 3139–3203. [Google Scholar] [CrossRef] [PubMed]
  28. Liu, Z.; Parvez, K.; Li, R.; Dong, R.; Feng, X.; Müllen, K. Transparent Conductive Electrodes from Graphene/PEDOT:PSS Hybrid Inks for Ultrathin Organic Photodetectors. Adv. Mater. 2015, 27, 669–675. [Google Scholar] [CrossRef] [PubMed]
  29. Lipomi, D.J.; Lee, J.A.; Vosgueritchian, M.; Tee, C.K.; Bolander, J.A.; Bao, Z. Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates. Chem. Mater. 2012, 24, 373–382. [Google Scholar] [CrossRef]
  30. Jung, S.; Lim, K.; Kang, J.W.; Kim, J.K.; Oh, S.I.; Eun, K.; Kim, D.G.; Choa, S.H. Electromechanical properties of indium-tin-oxide/poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) hybrid electrodes for flexible transparent electrodes. Thin Solid Films 2014, 550, 435–443. [Google Scholar] [CrossRef]
  31. Lee, Y.; Jin, W.Y.; Cho, K.Y.; Kang, J.W.; Kim, J. Thermal pressing of a metal-grid transparent electrode into a plastic substrate for flexible electronic devices. J. Mater. Chem. C 2016, 4, 4577–4583. [Google Scholar] [CrossRef]
  32. Mohl, M.; Dombovari, A.; Vajtai, R.; Ajayan, P.M.; Kordas, K. Self-assembled large scale metal alloy grid patterns as flexible transparent conductive layers. Sci. Rep. 2015, 5, 13710. [Google Scholar] [CrossRef] [PubMed]
  33. Kim, D.H.; Yu, K.C.; Kim, Y.; Kim, J.W. Highly Stretchable and Mechanically Stable Transparent Electrode Based on Composite of Silver Nanowires and Polyurethane-Urea. ACS Appl. Mater. Interfaces 2015, 7, 15214–15222. [Google Scholar] [CrossRef] [PubMed]
  34. Sciacca, B.; Groep, J.V.D.; Polman, A.; Garnett, E.C. Nanowires: Solution-Grown Silver Nanowire Ordered Arrays as Transparent Electrodes. Adv. Mater. 2016, 28, 976. [Google Scholar] [CrossRef]
  35. Guo, F.; Azimi, H.; Hou, Y.; Przybilla, T.; Hu, M.; Bronnbauer, C.; Langner, S.; Spiecker, E.; Forberich, K.; Brabec, C.J. High-performance semitransparent perovskite solar cells with solution-processed silver nanowires as top electrodes. Nanoscale 2015, 7, 1642–1649. [Google Scholar] [CrossRef] [PubMed]
  36. José, A.L.; Fe, M.M.; Gómez, D.; Luisa, M.A.; Bristow, N.; Paul, K.J.; Menéndez, A.; Ruiz, B. Rapid synthesis of ultra-long silver nanowires for tailor-made transparent conductive electrodes: Proof of concept in organic solar cells. Nanotechnology 2015, 26, 26. [Google Scholar]
  37. Li, B.; Ye, S.; Stewart, I.E.; Alvarez, S.; Wiley, B.J. Synthesis and Purification of Silver Nanowires To Make Conducting Films with a Transmittance of 99. Nano Lett. 2015, 15, 6722–6726. [Google Scholar] [CrossRef] [PubMed]
  38. Kumar, A.; Zhou, C. The race to replace tin-doped indium oxide: Which material will win? ACS Nano 2010, 4, 11–14. [Google Scholar] [CrossRef] [PubMed]
  39. Nair, R.R.; Blake, P.; Grigorenko, A.N.; Novoselov, K.S.; Booth, T.J.; Stauber, T.; Peres, N.M.; Geim, A.K. Fine structure constant defines visual transparency of graphene. Science 2008, 320, 1308. [Google Scholar] [CrossRef] [PubMed]
  40. Chen, J.H.; Jang, C.; Xiao, S.; Ishigami, M.; Fuhrer, M.S. Intrinsic and extrinsic performance limits of graphene devices on SiO2. Nat. Nanotechnol. 2008, 3, 206–209. [Google Scholar] [CrossRef] [PubMed]
  41. Mcdonald, C.; Salter, D.M.; Chetty, U.; Anderson, T.J. Roll-to-roll production of 30-inch graphene films for transparent electrodes. Nat. Nanotechnol. 2010, 5, 574–578. [Google Scholar]
  42. Park, J.U.; Nam, S.W.; Lee, M.S.; Lieber, C.M. Synthesis of monolithic graphene–graphite integrated electronics. Nat. Mater. 2011, 11, 120–125. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  43. Li, X.; Cai, W.; An, J.; Kim, S.; Nah, J.; Yang, D.; Piner, R.; Velamakanni, A.; Jung, I.; Tutuc, E. Large-area synthesis of high-quality and uniform graphene films on copper foils. Science 2009, 324, 1312–1314. [Google Scholar] [CrossRef] [PubMed]
  44. Wu, H.; Kong, D.; Ruan, Z.; Hsu, P.C.; Wang, S.; Yu, Z.; Carney, T.J.; Hu, L.; Fan, S.; Cui, Y. A transparent electrode based on a metal nanotrough network. Nat. Nanotechnol. 2013, 8, 421–425. [Google Scholar] [CrossRef] [PubMed]
  45. Hecht, D.S.; Hu, L.; Irvin, G. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures. Adv. Mater. 2011, 23, 1482–1513. [Google Scholar] [CrossRef] [PubMed]
  46. Ellmer, K. Past achievements and future challenges in the development of optically transparent electrodes. Nat. Photonics 2012, 6, 809–817. [Google Scholar] [CrossRef]
  47. Feng, C.; Liu, K.; Wu, J.S.; Liu, L.; Cheng, J.S.; Zhang, Y.; Sun, Y.; Li, Q.; Fan, S.; Jiang, K. Flexible, Stretchable, Transparent Conducting Films Made from Superaligned Carbon Nanotubes. Adv. Funct. Mater. 2010, 20, 885–891. [Google Scholar] [CrossRef]
  48. Lin, H.; Li, L.; Ren, J.; Cai, Z.; Qiu, L.; Yang, Z.; Peng, H. Conducting polymer composite film incorporated with aligned carbon nanotubes for transparent, flexible and efficient supercapacitor. Sci. Rep. 2013, 3, 1353. [Google Scholar] [CrossRef] [PubMed]
  49. Yuksel, R.; Sarioba, Z.; Cirpan, A.; Hiralal, P.; Unalan, H.E. Transparent and Flexible Supercapacitors with Single Walled Carbon Nanotube Thin Film Electrodes. ACS Appl. Mater. Interfaces 2014, 6, 15434–15439. [Google Scholar] [CrossRef] [PubMed]
  50. Ren, L.; Pint, C.L.; Arikawa, T.; Takeya, K.; Kawayama, I.; Tonouchi, M.; Hauge, R.H.; Kono, J. Broadband Terahertz Polarizers with Ideal Performance Based on Aligned Carbon Nanotube Stacks. Nano Lett. 2012, 12, 787–790. [Google Scholar] [CrossRef] [PubMed]
  51. Kim, B.J.; Park, J.S.; Hwang, Y.J.; Park, J.S. Characteristics of silver meshes coated with carbon nanotubes via spray-coating and electrophoretic deposition for touch screen panels. Thin Solid Films 2015, 596, 68–71. [Google Scholar] [CrossRef]
  52. Wu, Z.; Chen, Z.; Du, X.; Logan, J.M.; Sippel, J.; Nikolou, M.; Kamaras, K.; Reynolds, J.R.; Tanner, D.B.; Hebard, A.F. Transparent, conductive carbon nanotube films. Science 2004, 305, 1273–1276. [Google Scholar] [CrossRef] [PubMed]
  53. Eda, G.; Fanchini, G.; Chhowalla, M. Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material. Nat. Nanotechnol. 2008, 3, 270–274. [Google Scholar] [CrossRef] [PubMed]
  54. Hu, W.; Peng, C.; Luo, W.; Lv, M.; Li, X.; Li, D.; Huang, Q.; Fan, C. Graphene-based antibacterial paper. ACS Nano 2010, 4, 4317–4323. [Google Scholar] [CrossRef] [PubMed]
  55. Liu, J.; Yi, Y.; Zhou, Y.; Cai, H. Highly Stretchable and Flexible Graphene/ITO Hybrid Transparent Electrode. Nanoscale Res. Lett. 2016, 11, 1–7. [Google Scholar] [CrossRef] [PubMed]
  56. Qiu, T.; Luo, B.; Liang, M.; Ning, J.; Wang, B.; Li, X.; Zhi, L. Hydrogen reduced graphene oxide/metal grid hybrid film: Towards high performance transparent conductive electrode for flexible electrochromic devices. Carbon 2015, 81, 232–238. [Google Scholar] [CrossRef]
  57. Hong, J.Y.; Kim, W.; Choi, D.; Kong, J.; Park, H.S. Omni-Directionally Stretchable and Transparent Graphene Electrodes. ACS Nano 2016, 10, 9446–9455. [Google Scholar] [CrossRef] [PubMed]
  58. Park, H.; Rowehl, J.A.; Kim, K.K.; Bulovic, V.; Kong, J. Doped graphene electrodes for organic solar cells. Nanotechnology 2010, 21, 505204. [Google Scholar] [CrossRef] [PubMed]
  59. Groep, J.V.D.; Spinelli, P.; Polman, A. Transparent Conducting Silver Nanowire Networks. Nano Lett. 2012, 12, 3138–3144. [Google Scholar] [CrossRef] [PubMed]
  60. Bergin, S.M.; Chen, Y.H.; Rathmell, A.R.; Charbonneau, P.; Li, Z.Y.; Wiley, B.J. The effect of nanowire length and diameter on the properties of transparent, conducting nanowire films. Nanoscale 2012, 4, 1996–2004. [Google Scholar] [CrossRef] [PubMed]
  61. Mutiso, R.M.; Sherrott, M.C.; Rathmell, A.R.; Wiley, B.J.; Winey, K.I. Integrating simulations and experiments to predict sheet resistance and optical transmittance in nanowire films for transparent conductors. ACS Nano 2013, 7, 7654–7663. [Google Scholar] [CrossRef] [PubMed]
  62. Jiu, J.; Nogi, M.; Sugahara, T.; Tokuno, T.; Araki, T.; Komoda, N.; Suganuma, K.; Uchida, H.; Shinozaki, K. Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique. J. Mater. Chem. 2012, 22, 23561–23567. [Google Scholar] [CrossRef]
  63. Garnett, E.C.; Cai, W.; Cha, J.J.; Mahmood, F.; Connor, S.T.; Christoforo, M.G.; Cui, Y.; Mcgehee, M.D.; Brongersma, M.L. Self-limited plasmonic welding of silver nanowire junctions. Nat. Mater. 2012, 11, 241–249. [Google Scholar] [CrossRef] [PubMed]
  64. Chung, C.H.; Song, T.B.; Bob, B.; Zhu, R.; Yang, Y. Solution-processed flexible transparent conductors composed of silver nanowire networks embedded in indium tin oxide nanoparticle matrices. Nano Res. 2012, 5, 805–814. [Google Scholar] [CrossRef]
  65. Xiong, W.; Liu, H.; Chen, Y.; Zheng, M.; Zhao, Y.; Kong, X.; Wang, Y.; Zhang, X.; Kong, X.; Wang, P. Highly Conductive, Air-Stable Silver Nanowire@Iongel Composite Films toward Flexible Transparent Electrodes. Adv. Mater. 2016, 28. [Google Scholar] [CrossRef] [PubMed]
  66. Menamparambath, M.M.; Ajmal, C.M.; Kim, K.H.; Yang, D.; Roh, J.; Park, H.C.; Chan, K.; Choi, J.Y.; Baik, S. Silver nanowires decorated with silver nanoparticles for low-haze flexible transparent conductive films. Sci. Rep. 2015, 5, 16371. [Google Scholar] [CrossRef] [PubMed]
  67. Lee, M.S.; Lee, K.; Kim, S.Y.; Lee, H.; Park, J.; Choi, K.H.; Kim, H.K.; Kim, D.G.; Lee, D.Y.; Nam, S. High-performance, transparent, and stretchable electrodes using graphene-metal nanowire hybrid structures. Nano Lett. 2013, 13, 2814–2821. [Google Scholar] [CrossRef] [PubMed]
  68. Liang, J.; Li, L.; Tong, K.; Ren, Z.; Hu, W.; Niu, X.; Chen, Y.; Pei, Q. Silver Nanowire Percolation Network Soldered with Graphene Oxide at Room Temperature and Its Application for Fully Stretchable Polymer Light-Emitting Diodes. ACS Nano 2014, 8, 1590–1600. [Google Scholar] [CrossRef] [PubMed]
  69. Moon, I.K.; Kim, J.I.; Lee, H.; Hur, K.; Kim, W.C.; Lee, H. 2D Graphene Oxide Nanosheets as an Adhesive Over-Coating Layer for Flexible Transparent Conductive Electrodes. Sci. Rep. 2012, 3, 1112. [Google Scholar] [CrossRef]
  70. Liu, Y.; Chang, Q.; Huang, L. Transparent, flexible conducting graphene hybrid films with a subpercolating network of silver nanowires. J. Mater. Chem. C 2013, 1, 2970–2974. [Google Scholar] [CrossRef]
  71. Xu, Z.; Liu, Z.; Sun, H.; Gao, C. Highly Electrically Conductive Ag-Doped Graphene Fibers as Stretchable Conductors. Adv. Mater. 2013, 25, 3249–3253. [Google Scholar] [CrossRef] [PubMed]
  72. Cui, F.; Yu, Y.; Dou, L.; Sun, J.; Yang, Q.; Schildknecht, C.; Schierle-Arndt, K.; Yang, P. Synthesis of Ultrathin Copper Nanowires Using Tris(trimethylsilyl)silane for High-Performance and Low-Haze Transparent Conductors. Nano Lett. 2015, 15, 7610–7615. [Google Scholar] [CrossRef] [PubMed]
  73. Maurer, J.H.; Gonzalez-Garcia, L.; Reiser, B.; Kanelidis, I.; Kraus, T. Templated Self-Assembly of Ultrathin Gold Nanowires by Nanoimprinting for Transparent Flexible Electronics. Nano Lett. 2016, 16, 2921–2925. [Google Scholar] [CrossRef] [PubMed]
  74. An, B.W.; Gwak, E.J.; Kim, K.; Kim, Y.C.; Jang, J.; Kim, J.Y.; Park, J.U. Stretchable, Transparent Electrodes as Wearable Heaters Using Nanotrough Networks of Metallic Glasses with Superior Mechanical Properties and Thermal Stability. Nano Lett. 2015, 16, 471–478. [Google Scholar] [CrossRef] [PubMed]
  75. Han, B.; Pei, K.; Huang, Y.; Zhang, X.; Rong, Q.; Lin, Q.; Guo, Y.; Sun, T.; Guo, C.; Carnahan, D. Uniform Self-Forming Metallic Network as a High-Performance Transparent Conductive Electrode. Adv. Mater. 2014, 26, 873–877. [Google Scholar] [CrossRef] [PubMed]
  76. Guo, C.F.; Sun, T.; Liu, Q.; Suo, Z.; Ren, Z. Highly stretchable and transparent nanomesh electrodes made by grain boundary lithography. Nat. Commun. 2014, 5, 155–164. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  77. Khan, A.; Lee, S.; Jang, T.; Xiong, Z.; Zhang, C.; Tang, J.; Guo, L.J.; Li, W.D. High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process. Small 2016, 12, 3021–3030. [Google Scholar] [CrossRef] [PubMed]
  78. Hsu, P.C.; Wang, S.; Wu, H.; Narasimhan, V.K.; Kong, D.; Ryoung, L.H.; Cui, Y. Performance enhancement of metal nanowire transparent conducting electrodes by mesoscale metal wires. Nat. Commun. 2013, 4, 2522. [Google Scholar] [CrossRef] [PubMed]
  79. Seong, B.; Yoo, H.; Dat Nguyen, V.; Jang, Y.; Ryu, C.; Byun, D. Metal-mesh based transparent electrode on a 3-D curved surface by electrohydrodynamic jet printing. J. Micromech. Microeng. 2014, 24, 9. [Google Scholar] [CrossRef]
  80. Bao, B.; Jiang, J.; Li, F.; Zhang, P.; Chen, S.; Yang, Q.; Wang, S.; Su, B.; Jiang, L.; Song, Y. Fabrication of Patterned Concave Microstructures by Inkjet Imprinting. Adv. Funct. Mater. 2015, 25, 3286–3294. [Google Scholar] [CrossRef]
  81. Liu, Y.; Shen, S.; Hu, J.; Chen, L. Embedded Ag mesh electrodes for polymer dispersed liquid crystal devices on flexible substrate. Opt. Express 2016, 24, 25774–25784. [Google Scholar] [CrossRef] [PubMed]
  82. Kiruthika, S.; Gupta, R.; Anand, A.; Kumar, A.; Kulkarni, G.U. Fabrication of Oxidation Resistant Metal Wire Network Based Transparent Electrodes by a Spray-Roll Coating Process. ACS Appl. Mater. Interfaces 2015, 7, 27215–27222. [Google Scholar] [CrossRef] [PubMed]
  83. Lee, J.; Lee, P.; Lee, H.; Lee, D.; Lee, S.S.; Ko, S.H. Very long Ag nanowire synthesis and its application in a highly transparent, conductive and flexible metal electrode touch panel. Nanoscale 2012, 4, 6408–6414. [Google Scholar] [CrossRef] [PubMed]
  84. SVG Optronics. Available online: http://www.svgoptronics.com/en/product.asp?id=29 (accessed on 29 December 2016).
  85. Singh, M.; Rana, T.R.; Kim, S.Y.; Kim, K.; Yun, J.H.; Kim, J.H. Silver Nanowires Binding with Sputtered ZnO to Fabricate Highly Conductive and Thermally Stable Transparent Electrode for Solar Cell Applications. ACS Appl. Mater. Interfaces 2016, 8, 12764–12771. [Google Scholar] [CrossRef] [PubMed]
  86. Wu, J.; Que, X.; Hu, Q.; Luo, D.; Liu, T.; Liu, F.; Russell, T.P.; Zhu, R.; Gong, Q. Organic Solar Cells: Multi-Length Scaled Silver Nanowire Grid for Application in Efficient Organic Solar Cells. Adv. Funct. Mater. 2016, 26, 4822–4828. [Google Scholar] [CrossRef]
  87. Cai, G.; Darmawan, P.; Cui, M.; Wang, J.; Chen, J.; Magdassi, S.; Lee, P.S. Highly Stable Transparent Conductive Silver Grid/PEDOT:PSS Electrodes for Integrated Bifunctional Flexible Electrochromic Supercapacitors. Adv. Energy Mater. 2015, 6. [Google Scholar] [CrossRef]
  88. Cheng, T.; Zhang, Y.; Yi, J.; Yang, L.; Zhang, J.D.; Lai, W.Y.; Huang, W. Inkjet Printed Flexible, Transparent and Aesthetic Energy Storage Devices based on PEDOT:PSS/Ag Grids Electrodes. J. Mater. Chem. A 2016, 4, 13754–13763. [Google Scholar] [CrossRef]
  89. Lee, H.; Hong, S.; Lee, J.; Suh, Y.D.; Kwon, J.; Moon, H.; Kim, H.; Yeo, J.; Ko, S.H. Highly Stretchable and Transparent Supercapacitor by Ag–Au Core–Shell Nanowire Network with High Electrochemical Stability. ACS Appl. Mater. Interfaces 2016, 8, 15449–15458. [Google Scholar] [CrossRef] [PubMed]
Figure 1. (a) SEM image of a SWCNT thin film with a sheet resistance of 75 Ω□−1; (b) Optical transmittance characteristics of the full devices with respect to total SWCNT weight in both electrodes; (c) Cycle performance of flexible supercapacitors at a current density of 1.25 A/g. Reproduced with permission from Reference [49]. Copyright 2014, American Chemical Society.
Figure 1. (a) SEM image of a SWCNT thin film with a sheet resistance of 75 Ω□−1; (b) Optical transmittance characteristics of the full devices with respect to total SWCNT weight in both electrodes; (c) Cycle performance of flexible supercapacitors at a current density of 1.25 A/g. Reproduced with permission from Reference [49]. Copyright 2014, American Chemical Society.
Micromachines 08 00012 g001
Figure 2. (a) Optical image of graphene/ITO hybrid electrode; (b) Transmittance spectra of the samples on PET substrate. (a,b) Reproduced with permission from Ref. [55]. Copyright 2016, Springer Nature; (c) Photograph of a graphene/PDMS free-standing film; (d) Transmission spectra of a flat PDMS substrate (black) and multilayered graphene on a flat PDMS substrate (red); (e) bending radius and (f) tensile strains (insets: actual test images for a graphene/PDMS film); (cf) Reproduced with permission from Reference [57]. Copyright 2016, American Chemical Society.
Figure 2. (a) Optical image of graphene/ITO hybrid electrode; (b) Transmittance spectra of the samples on PET substrate. (a,b) Reproduced with permission from Ref. [55]. Copyright 2016, Springer Nature; (c) Photograph of a graphene/PDMS free-standing film; (d) Transmission spectra of a flat PDMS substrate (black) and multilayered graphene on a flat PDMS substrate (red); (e) bending radius and (f) tensile strains (insets: actual test images for a graphene/PDMS film); (cf) Reproduced with permission from Reference [57]. Copyright 2016, American Chemical Society.
Micromachines 08 00012 g002
Figure 3. (a) Schematic diagram of the fabrication process includes coating of metal nanowires on polymer substrate (EVA/PET), hot-press lamination with graphene/Cu foil, delamination of graphene and Cu foil by electrochemical bubbling method, and the reuse of Cu foil to grow graphene by a continuous chemical vapor deposition system. The detailed structural schematic of the hybrid film labeled in the red cycle shows that nanowires are partly embedded into the EVA substrate and fully encapsulated by monolayer graphene film; (b) SEM image of the monolayer graphene; (c) Enlarged side-view SEM image of the hybrid film of graphene and AgNWs; (d) Sheet resistance versus number density of AgNWs for pure AgNW film and graphene/AgNW hybrid film. Reproduced with permission from Reference [26]. Copyright 2015, American Chemical Society.
Figure 3. (a) Schematic diagram of the fabrication process includes coating of metal nanowires on polymer substrate (EVA/PET), hot-press lamination with graphene/Cu foil, delamination of graphene and Cu foil by electrochemical bubbling method, and the reuse of Cu foil to grow graphene by a continuous chemical vapor deposition system. The detailed structural schematic of the hybrid film labeled in the red cycle shows that nanowires are partly embedded into the EVA substrate and fully encapsulated by monolayer graphene film; (b) SEM image of the monolayer graphene; (c) Enlarged side-view SEM image of the hybrid film of graphene and AgNWs; (d) Sheet resistance versus number density of AgNWs for pure AgNW film and graphene/AgNW hybrid film. Reproduced with permission from Reference [26]. Copyright 2015, American Chemical Society.
Micromachines 08 00012 g003
Figure 4. (a) SEM image of AgNWs. Reproduced with permission from Reference [34]. Copyright 2016, American Chemical Society; (b) Synthesis of ultrathin copper nanowires. Reproduced with permission from Reference [72]. Copyright 2015, American Chemical Society; (c) SEM image of monolayer AuNWs on PDMS substrate. Reproduced with permission from Reference [73]. Copyright 2016, American Chemical Society.
Figure 4. (a) SEM image of AgNWs. Reproduced with permission from Reference [34]. Copyright 2016, American Chemical Society; (b) Synthesis of ultrathin copper nanowires. Reproduced with permission from Reference [72]. Copyright 2015, American Chemical Society; (c) SEM image of monolayer AuNWs on PDMS substrate. Reproduced with permission from Reference [73]. Copyright 2016, American Chemical Society.
Micromachines 08 00012 g004
Figure 5. (a) Sheet resistance versus optical transmission (at 550 nm) for copper, gold, silver, and aluminum nanotrough networks, described by percolation theory. The performances of device-grade ITO, CNTs, graphene, silver nanowires (NWs), silver grid, and nickel thin films are shown for comparison; (b) Rs versus bending radius for bendable transparent electrodes consisting of gold nanotrough networks or ITO films on 178-μm-thick PET substrates; (c) Rs versus uniaxial strain for a stretchable transparent electrode consisting of gold nanotrough networks on 0.5-mm-thick PDMS substrate. Reproduced with permission from Ref. [44]. Copyright 2013, Nature Publishing Group.
Figure 5. (a) Sheet resistance versus optical transmission (at 550 nm) for copper, gold, silver, and aluminum nanotrough networks, described by percolation theory. The performances of device-grade ITO, CNTs, graphene, silver nanowires (NWs), silver grid, and nickel thin films are shown for comparison; (b) Rs versus bending radius for bendable transparent electrodes consisting of gold nanotrough networks or ITO films on 178-μm-thick PET substrates; (c) Rs versus uniaxial strain for a stretchable transparent electrode consisting of gold nanotrough networks on 0.5-mm-thick PDMS substrate. Reproduced with permission from Ref. [44]. Copyright 2013, Nature Publishing Group.
Micromachines 08 00012 g005
Figure 6. (a) Specular optical transmittance of Ag mesh prepared from crackles of different widths. The sheet resistances of the samples are mentioned in parentheses. Photograph of the prepared TCE with 78% transmittance at 550 nm is shown as an inset. (b) Optical micrographs of Ag mesh of different widths. Scale bar is 1 mm. Relative variations in the resistance of the Ag mesh during (c) the scotch tape adhesion test, (d) sonication test, (e) bending to different radii, and (f) 500 bending cycles with a radius of 1.5 mm. The photographs in the inset in (a) show the scotch tape pasted over the Ag mesh and while peeling off. Reproduced with permission from Reference [82]. Copyright 2015, American Chemical Society.
Figure 6. (a) Specular optical transmittance of Ag mesh prepared from crackles of different widths. The sheet resistances of the samples are mentioned in parentheses. Photograph of the prepared TCE with 78% transmittance at 550 nm is shown as an inset. (b) Optical micrographs of Ag mesh of different widths. Scale bar is 1 mm. Relative variations in the resistance of the Ag mesh during (c) the scotch tape adhesion test, (d) sonication test, (e) bending to different radii, and (f) 500 bending cycles with a radius of 1.5 mm. The photographs in the inset in (a) show the scotch tape pasted over the Ag mesh and while peeling off. Reproduced with permission from Reference [82]. Copyright 2015, American Chemical Society.
Micromachines 08 00012 g006aMicromachines 08 00012 g006b
Figure 7. Sheet resistance/Transmission values of FTEs reported in recent works.
Figure 7. Sheet resistance/Transmission values of FTEs reported in recent works.
Micromachines 08 00012 g007
Figure 8. (a) Schematic illustration of the fabrication process of an embedded Ag network on PET (PEAN) and its optical image; (b) Device structure and performance of flexible white OLED using PEAN anode. Reproduced with permission from Reference [1]. Copyright 2014, American Chemical Society.
Figure 8. (a) Schematic illustration of the fabrication process of an embedded Ag network on PET (PEAN) and its optical image; (b) Device structure and performance of flexible white OLED using PEAN anode. Reproduced with permission from Reference [1]. Copyright 2014, American Chemical Society.
Micromachines 08 00012 g008
Figure 9. (a) Comparison of morphologies by AFM analyses and a diagram comparing the roughness of various samples; (b) Bending stability of the flexible OLEDs based on AgNWs-cPI composite electrodes. Reproduced with permission from Reference [2]. Copyright 2015, Macmillan Publishers Limited.
Figure 9. (a) Comparison of morphologies by AFM analyses and a diagram comparing the roughness of various samples; (b) Bending stability of the flexible OLEDs based on AgNWs-cPI composite electrodes. Reproduced with permission from Reference [2]. Copyright 2015, Macmillan Publishers Limited.
Micromachines 08 00012 g009
Figure 10. Fabrication and characterization of Ag–Au core–shell NW-based electrodes. (a) Schematic illustration of the electrode fabrication through vacuum filtration and transfer method; (b) Digital image of as-prepared transparent Ag–Au core–shell NW network electrodes at various sheet resistances; (c) Optical transmittance of the transparent electrodes at various areal NW densities; (d) Strain-dependent electrical resistance of Ag–Au core–shell NW electrode on an elastic PDMS substrate. Reproduced with permission from Reference [89]. Copyright 2016, American Chemical Society.
Figure 10. Fabrication and characterization of Ag–Au core–shell NW-based electrodes. (a) Schematic illustration of the electrode fabrication through vacuum filtration and transfer method; (b) Digital image of as-prepared transparent Ag–Au core–shell NW network electrodes at various sheet resistances; (c) Optical transmittance of the transparent electrodes at various areal NW densities; (d) Strain-dependent electrical resistance of Ag–Au core–shell NW electrode on an elastic PDMS substrate. Reproduced with permission from Reference [89]. Copyright 2016, American Chemical Society.
Micromachines 08 00012 g010

Share and Cite

MDPI and ACS Style

Luo, M.; Liu, Y.; Huang, W.; Qiao, W.; Zhou, Y.; Ye, Y.; Chen, L.-S. Towards Flexible Transparent Electrodes Based on Carbon and Metallic Materials. Micromachines 2017, 8, 12. https://doi.org/10.3390/mi8010012

AMA Style

Luo M, Liu Y, Huang W, Qiao W, Zhou Y, Ye Y, Chen L-S. Towards Flexible Transparent Electrodes Based on Carbon and Metallic Materials. Micromachines. 2017; 8(1):12. https://doi.org/10.3390/mi8010012

Chicago/Turabian Style

Luo, Minghui, Yanhua Liu, Wenbin Huang, Wen Qiao, Yun Zhou, Yan Ye, and Lin-Sen Chen. 2017. "Towards Flexible Transparent Electrodes Based on Carbon and Metallic Materials" Micromachines 8, no. 1: 12. https://doi.org/10.3390/mi8010012

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop