Next Article in Journal
A Novel Piezo-Actuator-Sensor Micromachine for Mechanical Characterization of Micro-Specimens
Next Article in Special Issue
Mori-Tanaka Based Estimates of Effective Thermal Conductivity of Various Engineering Materials
Previous Article in Journal
A Review on Mixing in Microfluidics
Article Menu

Export Article

Open AccessArticle
Micromachines 2010, 1(3), 112-128; doi:10.3390/microm1010112

Optimization Strategy for Resonant Mass Sensor Design in the Presence of Squeeze Film Damping

Department of Mechanical Engineering-Engineering Mechanics, Michigan Technological University, 1400 Townsend Drive, Houghton, MI, USA
Author to whom correspondence should be addressed.
Received: 27 October 2010 / Revised: 17 November 2010 / Accepted: 6 December 2010 / Published: 14 December 2010
(This article belongs to the Special Issue Advances in Micromechanics and Microengineering)


This paper investigates the design optimization of an electrostatically actuated microcantilever resonator that operates in air. The nonlinear effects of electrostatic actuation and air damping make the structural dynamics modeling more complex. There is a need for an efficient way to simulate the system behavior so that the design can be more readily optimized. This paper describes an efficient analytical approach for determining the optimum design for a microcantilever resonant mass sensor. One simple case is described. The sensor design is a square plate that is coated with a functional polymer and attached to the substrate with folded leg springs. The plate has a square hole in the middle to reduce the effect of squeeze film damping. With the analytical approach, the optimum hole size for maximum sensitivity is found. View Full-Text
Keywords: squeeze film damping; MEMS; resonant mass sensor; optimization squeeze film damping; MEMS; resonant mass sensor; optimization

Figure 1

This is an open access article distributed under the Creative Commons Attribution License (CC BY 3.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Li, C.; Miller, M.H. Optimization Strategy for Resonant Mass Sensor Design in the Presence of Squeeze Film Damping. Micromachines 2010, 1, 112-128.

Show more citation formats Show less citations formats

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Micromachines EISSN 2072-666X Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top