Next Article in Journal
Stimuli-Responsive Polymer-Clay Nanocomposites under Electric Fields
Next Article in Special Issue
Effects on the Physical and Mechanical Properties of Porous Concrete for Plant Growth of Blast Furnace Slag, Natural Jute Fiber, and Styrene Butadiene Latex Using a Dry Mixing Manufacturing Process
Previous Article in Journal
Biodegradable Nanocomposite Films Based on Sodium Alginate and Cellulose Nanofibrils
Previous Article in Special Issue
Influence of Blended Cements with Calcareous Fly Ash on Chloride Ion Migration and Carbonation Resistance of Concrete for Durable Structures
Article Menu
Issue 1 (January) cover image

Export Article

Open AccessArticle
Materials 2016, 9(1), 51; doi:10.3390/ma9010051

Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate) (EVA)

1
Laboratory of Materials Chemistry Research, University of Caxias do Sul, Rua Francisco Getúlio Vargas, 1130, Caxias do Sul RS 95070-560, Brazil
2
Laboratory of Constructive Technology, University of Caxias do Sul, Avenida Frederico Segala, 3099, Caxias do Sul RS 95010-550, Brazil
*
Author to whom correspondence should be addressed.
Academic Editor: Prabir Sarker
Received: 9 October 2015 / Revised: 15 November 2015 / Accepted: 25 November 2015 / Published: 15 January 2016
(This article belongs to the Special Issue Utilisation of By-Product Materials in Concrete)
View Full-Text   |   Download PDF [1529 KB, uploaded 15 January 2016]   |  

Abstract

This paper aims to contribute to acoustical comfort in buildings by presenting a study about the polymer waste micronized poly (ethylene vinyl acetate) (EVA) to be used in mortars for impact sound insulation in subfloor systems. The evaluation method included physical, mechanical and morphological properties of the mortar developed with three distinct thicknesses designs (3, 5, and 7 cm) with replacement percentage of the natural aggregate by 10%, 25%, and 50% EVA. Microscopy analysis showed the surface deposition of cement on EVA, with preservation of polymer porosity. The compressive creep test estimated long-term deformation, where the 10% EVA sample with a 7 cm thick mortar showed the lowest percentage deformation of its height. The impact noise test was performed with 50% EVA samples, reaching an impact sound insulation of 23 dB when the uncovered slab was compared with the 7 cm thick subfloor mortar. Polymer waste addition decreased the mortar compressive strength, and EVA displayed characteristics of an influential material to intensify other features of the composite. View Full-Text
Keywords: recycled aggregates; lightweight mortar; poly (ethylene vinyl acetate); impact noise recycled aggregates; lightweight mortar; poly (ethylene vinyl acetate); impact noise
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (CC BY 4.0).

Scifeed alert for new publications

Never miss any articles matching your research from any publisher
  • Get alerts for new papers matching your research
  • Find out the new papers from selected authors
  • Updated daily for 49'000+ journals and 6000+ publishers
  • Define your Scifeed now

SciFeed Share & Cite This Article

MDPI and ACS Style

Brancher, L.R.; Nunes, M.F.O.; Grisa, A.M.C.; Pagnussat, D.T.; Zeni, M. Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate) (EVA). Materials 2016, 9, 51.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Materials EISSN 1996-1944 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top