2012 September - 32 articles
The paper presents a comparison of various CHP system configurations, such as Vapour Turbine, Gas Turbine, Internal Combustion Engine, External Combustion Engine (Stirling, Ericsson), when different thermodynamic criteria are considered, namely the f...
The hydrogen desorption/absorption behaviors of LiAlH4/LiBH4 with a focus on the effects of catalysts, namely TiCl3, TiO2, VCl3, and ZrCl4, were investigated using a thermal-volumetric apparatus. The hydrogen desorption was performed from room temper...
Quantum-behaved particle swarm optimization (QPSO) is an efficient and powerful population-based optimization technique, which is inspired by the conventional particle swarm optimization (PSO) and quantum mechanics theories. In this paper, an improve...
This paper proposes a coexistence model for two independent companies both operating hydropower plants in the same river flow, based on a case study of the Cetina river basin in Croatia. Companies are participants of the day-ahead electricity market....
This paper presents a newly developed aero-servo-elastic platform for implementing smart rotor control and shows its effectiveness with aerodynamic loads on large-scale offshore wind turbines. The platform was built by improving the FAST/Aerodyn code...
This study aims to determine the necessity of applying a mirror coating on the side of a truncated solid dielectric CPC (compound parabolic concentrator) since ray tracing analysis has revealed that part of the incoming rays do not undergo total inte...
The electricity market and environmental concerns, with wide utilization of renewable sources, have improved the diffusion of distributed generation units changing the operations of distribution grids from passive networks to microgrids. A microgrid...
Industrial energy efficiency has received increasing attention in many countries because of its importance in the pursuit of energy supply security, increased economic competitiveness and in the mitigation of greenhouse gases emissions. This paper ai...
This paper investigates the optimization of the performance of a solar powered Stirling engine based on finite-time thermodynamics. Heat transference in the heat exchangers between a concentrating solar collector and the Stirling engine is studied. T...
This paper deals with a fault-tolerant semi-12-phase permanent-magnet synchronous machine (PMSM) used for electric vehicles. High fault-tolerant and low toque ripple features are achieved by employing fractional slot concentrated windings (FSCWs) and...
When a three-phase induction generator (IG) supplies unbalanced loads, its terminal voltages and line currents are also unbalanced, which may cause the IG to overheat and need to be derated. A single-phase loaded self-excited induction generator (SEI...
Classical equilibrium molecular dynamics (MD) simulations have been performed to investigate the computational performance of the Simple Point Charge (SPC) and TIP4P water models applied to simulation of methane hydrates, and also of liquid water, on...
The objective of this study was to provide experimental data that could be used to predict frost growth and frost performance of a round plate fin-tube heat exchanger for low temperature heat pumps used in zero emission vehicles under cold weather co...
Cheese whey utilization is of major concern nowadays. Its high organic matter content, in combination with the high volumes produced and limited treatment options make cheese whey a serious environmental problem. However, the potential production of...
In this paper, the exergoeconomic analysis was conducted to an existing ultra-supercritical coal-fired power plant in China to understand the cost-formation process, to evaluate the economic performance of each component and to find possible solution...
It is known that glazed openings are very important elements in the energetic behavior of buildings, especially in Mediterranean climates where there are many hours of solar radiation. The objective of this study was to determine the influence of so...
A detailed review of the current state-of-art for wind turbine blade design is presented, including theoretical maximum efficiency, propulsion, practical efficiency, HAWT blade design, and blade loads. The review provides a complete picture of wind t...
In this study, the feasibility of using micro-wind turbines to power wireless sensors on a cable-stayed bridge is comprehensively investigated. To this end, the wind environment around a bridge onto which a turbine is installed is examined, as is the...
Diesel is an essential factor in industrial production and development, and thus its stable supply is a crucial element for economic growth. The supply shortage of diesel has massive economic costs, namely supply shortage costs. This paper attempts t...
Many models have been developed to forecast wind farm power output. It is generally difficult to determine whether the performance of one model is consistently better than that of another model under all circumstances. Motivated by this finding, we a...
A microgrid is an eco-friendly power system because renewable sources such as solar and wind power are used as the main power sources. For this reason, much research, development, and demonstration projects have recently taken place in many countries...
Driving patterns exert an important influence on the fuel economy of vehicles, especially hybrid electric vehicles. This paper aims to build a method to identify driving patterns with enough accuracy and less sampling time compared than other driving...
The current study describes the emphatic use of response surface methodology for the optimized biodiesel production using chemical and enzymatic transesterification of rice bran and sunflower oils. Optimal biodiesel yields were determined to be 65.3...
In Northern China, due to the high penetration of coal-fired cogeneration facilities, which are generally equipped with extraction-condensing steam turbines, lots of wind power resources may be wasted during the heating season. In contrast, considera...
This paper describes a kinetic study of the decomposition of waste printed circuit boards (WPCB) under conventional and microwave-induced pyrolysis conditions. We discuss the heating rates and the influence of the pyrolysis on the thermal decompositi...
The performance analysis of a supercritical organic Rankine cycle system driven by exhaust heat using 18 organic working fluids is presented. Several parameters, such as the net power output, exergy efficiency, expander size parameter (SP), and heat...
In a conventional distribution system, protection algorithms are designed to operate on a unidirectional high fault-current level. In a microgrid, a fault current from distributed generation (DG) may bring about a relay malfunction because of the bid...
More than a single thermosyphon solar water heater may be employed in applications when considerable hot water consumption is required. In this experimental investigation, eight typical Taiwanese solar water heaters were connected in series. Degree o...
The impacts of ventilation ratio and vent balance on cooling load and air flow of naturally ventilated attics are studied in this paper using an unsteady computational fluid dynamics (CFD) model. Buoyancy-driven turbulent ventilations in attics of ga...
Animal wastes from high-density farming have severe impacts on the nitrogen cycle. According to current regulations, the disposal of manure on cropland is constrained by nitrogen content in the agricultural soils. On the contrary, anaerobic digestion...
N2O emissions from coal fired fluidized-bed combustion are approximately 30–360 mg/Nm3, much higher than that from pulverized coal combustion (less than 30 mg/Nm3). One approach to reduce the N2O is to reburn the biomass gasification gas in the coal-...
Optimization of four parameters, i.e., zinc (Zn2+), magnesium (Mg2+), manganese (Mn2+) and yeast extract for bioethanol production from sweet sorghum juice by Saccharomyces cerevisiae NP 01 under very high gravity (VHG, 270 g·L−1 of total sugar) cond...
