Next Article in Journal
Mitoxantrone is More Toxic than Doxorubicin in SH-SY5Y Human Cells: A ‘Chemobrain’ In Vitro Study
Previous Article in Journal
Iron Release from Soybean Seed Ferritin Induced by Cinnamic Acid Derivatives
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis and Structure-Activity Relationships of (−)-cis-N-Normetazocine-Based LP1 Derivatives

1
Department of Drug Sciences, Medicinal Chemistry Section, University of Catania, Viale A. Doria 6, 95125 Catania, Italy
2
Department of Drug Sciences, Pharmacology and Toxicology Section, University of Catania, Viale A. Doria 6, 95125 Catania, Italy
3
Laboratory of Cellular Signaling and Molecular Pharmacology, Institute of Biosciences and Applications, National Centre for Scientific Research “Demokritos” Agia Paraskevi-Attikis, 15310 Athens, Greece
4
Department of Medical Sciences, Section of Pharmacology, University of Ferrara, via Fossato di Mortara 19, 44121 Ferrara, Italy
5
Department of Drug Sciences, Pharmaceutical Technology Section, University of Catania, Viale A. Doria 6, 95125 Catania, Italy
*
Author to whom correspondence should be addressed.
Pharmaceuticals 2018, 11(2), 40; https://doi.org/10.3390/ph11020040
Submission received: 16 April 2018 / Revised: 2 May 2018 / Accepted: 3 May 2018 / Published: 5 May 2018

Abstract

:
(−)-cis-N-Normetazocine represents a rigid scaffold able to mimic the tyramine moiety of endogenous opioid peptides, and the introduction of different N-substituents influences affinity and efficacy of respective ligands at MOR (mu opioid receptor), DOR (delta opioid receptor), and KOR (kappa opioid receptor). We have previously identified LP1, a MOR/DOR multitarget opioid ligand, with an N-phenylpropanamido substituent linked to (−)-cis-N-Normetazocine scaffold. Herein, we report the synthesis, competition binding and calcium mobilization assays of new compounds 1016 that differ from LP1 by the nature of the N-substituent. In radioligand binding experiments, the compounds 1013, featured by an electron-withdrawing or electron-donating group in the para position of phenyl ring, displayed improved affinity for KOR (Ki = 0.85–4.80 μM) in comparison to LP1 (7.5 μM). On the contrary, their MOR and DOR affinities were worse (Ki = 0.18–0.28 μM and Ki = 0.38–1.10 μM, respectively) with respect to LP1 values (Ki = 0.049 and 0.033 μM). Analogous trends was recorded for the compounds 1416, featured by indoline, tetrahydroquinoline, and diphenylamine functionalities in the N-substituent. In calcium mobilization assays, the compound 10 with a p-fluorophenyl in the N-substituent shared the functional profile of LP1 (pEC50MOR = 7.01), although it was less active. Moreover, the p-methyl- (11) and p-cyano- (12) substituted compounds resulted in MOR partial agonists and DOR/KOR antagonists. By contrast, the derivatives 1315 resulted as MOR antagonists, and the derivative 16 as a MOR/KOR antagonist (pKBMOR = 6.12 and pKBKOR = 6.11). Collectively, these data corroborated the critical role of the N-substituent in (−)-cis-N-Normetazocine scaffold. Thus, the new synthesized compounds could represent a template to achieve a specific agonist, antagonist, or mixed agonist/antagonist functional profile.

Graphical Abstract

1. Introduction

Natural, semi-synthetic, and synthetic opioid ligands [1,2,3,4], featured with different structural scaffolds, exert their action following recognition of three different opioid receptors, namely mu, delta, and kappa opioid receptors (MOR, DOR, and KOR, respectively), which are members of the large superfamily of G protein coupled receptors (GPCRs) [5] that couple to Gi/o members and other proteins to regulate signaling. Endogenous ligands of these receptors are opioid peptides generally characterized by the highly conserved N-terminal tetrapeptidic sequence Tyr–Gly–Gly–Phe [6], although the MOR-selective endogenous peptides, endomorphin-1 (EM-1, Tyr–Pro–Trp–Phe–NH2) and endomorphin-2 (EM-2, Tyr–Pro–Phe–Phe–NH2), had a different sequence [7]. (−)-cis-N-Normetazocine, resulting from a progressive simplification of morphine skeleton, represents a rigid scaffold able to support the phenolic ring and the basic nitrogen in a conformation mimicking the tyramine moiety of opioid peptides [8]. In several investigations, the pivotal role of the substituent at the basic nitrogen has emerged [9,10,11,12,13]. Indeed, the N-substituent nature influences affinity, selectivity, and activity towards all three opioid receptor subtypes.
We have previously reported the synthesis and pharmacological characterization of different series of (−)-cis-N-normetazocine-based ligands [14]. These data demonstrated that the introduction of the acetamido spacer in the basic nitrogen was detrimental for MOR, DOR, and KOR binding. By contrast, the N-propanamido spacer elongation provided derivatives with an improved binding profile. Among them, LP1 ((1) (3-[(2R,6R,11R)-8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]-N-phenylpropanamide, Figure 1), featured with a N-phenylpropanamido substituent, resulted in high MOR and significant DOR binding coupled to a MOR/DOR agonist multitarget profile, consistent with its significant antinociceptive effect in nociceptive and persistent pain rat models [15,16,17]. It has also highlighted the importance in the N-substituent of a secondary amide for the opioid receptor interactions [14], while the presence of a tertiary amide led to poor Ki values, mainly towards MOR. Moreover, the critical role of the aromatic ring in the N-phenylpropanamido spacer was assessed. Saturated chains made worse the receptor binding interaction, although the cyclohexyl ring retained a significant MOR affinity [14]. Bulkier aromatic/heteroaromatic rings also resulted in a loss of opioid binding affinity, with the exception of the compound bearing 1-naphthyl ring in the N-propanamido chain ((2), Figure 1) that retained MOR affinity with a high degree of selectivity. However, this bulkier substituent switched the efficacy profile from agonism to antagonism [18]. The presence of a second positive charge, as well as the shortening of the N-substituent spacer, obtained through the insertion of secondary and tertiary ethylamino or propylamino side chains, led to benzomorphan-based compounds able to address the ligand–opioid receptor interaction, mainly at MOR and KOR [19]. Recently, we have also reported the insertion at the basic nitrogen of a shorter and more flexible ethyl spacer with H-bonding groups at carbon 2 as a successful strategy to improve MOR and DOR affinity [20].
In this study, we extended our structure–activity relationships (SARs) [14,18,19,20] and evaluated the effects of para electron-donating or -withdrawing groups insertion in the LP1 phenyl ring (1013, Figure 2). Moreover, the employment of phenyl ring surrogates with an increased steric hindrance (using indoline, tetrahydroquinoline, and diphenylamine functionalities) in the N-substituent (1416, Figure 2) was also assessed. To determine the opioid functional profile, derivatives 1016 were tested by radioligand competition binding and calcium mobilization assays for MOR, DOR, and KOR. Collected data corroborated the importance of the phenyl ring in the N-propanamido substituent of the (−)-cis-N-Normetazocine scaffold for MOR and DOR functional profile. Although all synthesized compounds, in comparison to the lead compound LP1, exhibited a worse efficacy profile, they could represent a template in the achievement of a specific functional profile, by modifying N-substituent electronic and steric features.

2. Results and Discussion

2.1. Chemistry

In Scheme 1, the synthesis of the novel compounds is illustrated. Resolution of (±)-cis-N-Normetazocine was carried as previously reported [18,21]. Briefly, amides 39 were prepared by acylation of the respective amines with 3-bromopropionyl chloride in anhydrous THF in argon atmosphere. The target compounds 1016 were obtained by alkylation of (˗)-cis-(1R,5R,9R)-N-Normetazocine with the respective amides 39 in DMF. All the synthesized compounds were characterized by IR, 1H NMR, 13C NMR, mass spectroscopy, and elemental analysis.

2.2. Radioligand Binding Assay

All synthesized compounds were tested in vitro by radioligand competition binding using [3H]-diprenorphine ([3H]-DPN) to measure the affinity for opioid receptor subtypes in membranes from HEK293 cells stably expressing either MOR, DOR, or KOR, as previously described [22,23]. Calculated Ki values are listed in Table 1. In comparison to the lead LP1, compounds 1016 displayed a decreased binding affinity for MOR and DOR, while affinity for KOR was increased.
MOR Ki values for the p-substituted phenyl derivatives 10–13 were six-, five-, four-, and four-times higher than LP1 Ki values. Increased Ki values at DOR were also recorded for compounds 10–13. In fact, DOR Ki values for compounds 10–13 were twenty-eight-, twelve-, eleven-, and thirty-times higher than LP1 Ki values. On the other hand, the KOR affinity of p-substituted phenyl analogues was increased. An analogous trend in receptor affinity was also reported for compounds 14–16 that displayed eight-, seven-, and three-times decreased affinity versus MOR and DOR. Notably, the KOR affinity of compounds 14–16 significantly increased, with Ki values approximately five-, thirty-seven-, and thirty-seven-times lower than the LP1 Ki value. These data once more underline the critical role of N-substituent in (−)-cis-N-Normetazocine scaffold for opioid receptor binding affinity.
Tested compounds 10–16 differ from the LP1 structure by their N-substituent nature. In compounds 10–13, the introduction of an electron-withdrawing or electron-donating group para to the phenyl ring in the N-phenylpropanamido chain is critical for MOR and DOR interaction, but led to an improved KOR interaction. In compounds 14–16, the phenyl ring replacement with indoline, tetrahydroquinoline, and diphenylamine functionalities was detrimental for MOR, and mainly for DOR interaction, while the KOR interaction was improved. Thus, the introduction at the N-substituent of a phenyl ring with different electronic and steric features significantly improve KOR interaction, but not MOR and DOR.

2.3. Calcium Mobilization Assay

The pharmacological characterization of LP1 derivatives 2 and 1016 was performed by calcium mobilization assay (Table 2). This procedure was preliminarily validated through a series of experiments where the effects of DPDPE, dermorphin, and dynorphin A were assessed in CHO cells expressing the human recombinant opioid receptors and Gαqi5 or GαqG66Di5 chimeric proteins [24]. The obtained results highlighted that all the standard compounds tested showed the expected functional profile.
In CHOMOR cells stably expressing the Gαqi5 chimeric protein, LP1, 10, 11, and 12 were able to stimulate calcium mobilization in a concentration-dependent manner, with LP1 showing the highest potency (pEC50 = 7.01 and α = 0.40 ± 0.020), thus resulting in a full MOR agonist, as reported elsewhere [14,15,16]. Compounds 10, 11, and 12 were, in fact, approximately ten-times less potent than LP1, and their estimated maximal effects were lower (α = 0.30 ± 0.015, 0.23 ± 0.011, 0.34 ± 0.017, respectively). In cells expressing the Gαqi5 chimeric protein, but not MOR, these compounds were found completely inactive up to 10 μM (data not shown). These results collectively demonstrated that compounds 10, 11, and 12 behave as MOR partial agonists.
LP1 derivatives 13–16 were not able to stimulate calcium mobilization in CHOMOR cells stably expressing the Gαqi5 protein. In antagonist type experiments, compounds 13–16 were capable of inhibiting the stimulatory effects induced by dermorphin, with an antagonist potency range of 5.71–6.30.
In CHODOR cells stably expressing the GαqG66Di5 chimeric protein, the compound LP1 was able to stimulate calcium mobilization in a concentration-dependent manner, with a pEC50 of 5.95 and low maximal effect (concentration response curve was not completed) resulting in a partial DOR agonist. The LP1 functional profile at DOR, previously in vitro detected [14,16] by adenylyl cyclase, and the [35S]GTPγS binding assays was controversial. Indeed, LP1 dose-dependently inhibited the cAMP accumulation, however, it was approximately 85-fold less potent than DPDPE. These results suggested that LP1 was a weak DOR agonist [14]. Contrarily, low concentrations (10 nM) of LP1 resulted in 30% inhibition of [35S]GTPγS binding [16], suggesting that LP1 at low concentrations acts as an inverse agonist, and inhibits the constitutive coupling that occurs between DOR and G proteins. Similar findings with DOR spontaneous activity and effects of DOR antagonists have been previously described [25]. This effect was reversed at higher LP1 concentrations [16]. These [35S]GTPγS binding results reveal the role of LP1 as a DOR antagonist ligand. Based on the fact that LP1 displays a weak effect on adenyl cyclase activity induced in DOR-expressing cells, we suggested that LP1 is a potent DOR antagonist displaying inverse agonist activity. The DOR antagonist profile of LP1 was also detected in vivo by rat tail flick test. In cells expressing the GαqG66Di5 chimeric protein, but not DOR, LP1 was found completely inactive up to 10 μM (data not shown). Compound 10 was able to stimulate calcium mobilization, but only at the higher concentration tested (10 μM). The remaining LP1 derivatives 11–16 were not able to stimulate calcium mobilization in CHODOR cells stably expressing the GαqG66Di5 protein. In antagonist type experiments, derivatives 11–12 were able to inhibit the stimulatory effects induced by DPDPE, however, the inhibition response curves to these compounds were incomplete. Compounds 13–16 were not able to inhibit the stimulatory effects induced by DPDPE.
In CHOKOR cells stably expressing the Gαqi5 chimeric protein, LP1 and most of its derivatives at higher concentration, up to 10 μM, did not stimulate calcium release (data not shown). Compound 15 was able to stimulate calcium mobilization in a concentration-dependent manner with a pEC50 of 6.59, behaving as a low potency and low efficacy (α = 0.32 ± 0.016) partial agonist of KOR. In antagonist type experiments, compounds 11, 12, and 16 were able to inhibit the stimulatory effects induced by dynorphin A; however, the inhibition response curves to these compounds were incomplete.
In this series, only compound 10 shares a functional profile with LP1, although it was less active, and it binds MOR and DOR with a Ki in the micromolar range. p-Methyl- (11) and p-cyano- (12) derivatives display comparable functional profile, resulting in MOR partial agonists and DOR/KOR antagonists. Their MOR potencies were higher than compound 10, but lower than LP1. These results enabled us to recognize how the presence of bulkier substituents and their electronic effect in the N-phenylpropanamido chain could be a stringent feature for opioid receptors efficacy profile. The steric hindrance of N-substituents in derivatives 13–16 affects the shift from MOR agonism to antagonism. Moreover, in conformationally restrained compounds 14 and 15, the restriction in the degrees of freedom due to cyclization led to a loss of MOR agonist activity in favor to an antagonist profile. In a previous investigation [18], we already reported that increased ring sizes other than aromatic/heteroaromatic ring orientation of the N-substituents with respect to the (−)-cis-N-Normetazocine scaffold modulated affinity, selectivity, and activity towards MOR. The switching of the functional profile from agonism to antagonism versus MOR (pKB = 7.90 ± 0.60) of the N-1-naphthyl derivative (2) was also confirmed in the calcium mobilization assays.

3. Materials and Methods

3.1. Chemistry

3.1.1. General Experimental Procedures

All commercial chemicals were purchased from Sigma-Aldrich (St. Louis, MO, USA) or Merck (Darmstadt, Germany) and were used without further purification. (±)-cis-N-Normetazocine was obtained from Fabbrica Italiana Sintetici (Milano, Italy). Melting points were determined in open capillary tubes with a Büchi 530 apparatus (Büchi, Flawil, Switzerland) and are uncorrected. Analytical TLC was performed on silica gel 60 F254 aluminum sheets (Merck, Kenilworth, NJ, USA) with fluorescent indicator. Components were visualized by UV light (λ = 254 nm) and iodine vapors. Flash column chromatography was carried out on Merck silica gel 60 (230–400 mesh). Optical rotations were determined in MeOH solution with a Perkin-Elmer 241 polarimeter (Llantrisant, UK). Infrared spectra were recorded on a 1600 FT-IR Perkin-Elmer instrument (PerkinElmer, Milano, Italy). 1H and 13C NMR spectra were routinely recorded on a Varian Inova-500 spectrometer in CDCl3 or DMSO solution (Varian, Palo Alto, CA, USA); chemical shifts δ are expressed in ppm with reference to tetramethylsilane as an internal standard. GCMS analysis was recorded using a Shimadzu QP500 EI 171 (70 eV) (Shimadzu Scientific Instruments, Columbia, MD, USA). Elemental analyses (C, H, N) were performed on a Carlo Erba 1106 analyzer (Milan, Italy) and the results were within ±0.4% of the theoretical values. All reported compounds had a purity of at least 95%.

3.1.2. General Procedure for the Preparation of 3-Bromo Propanamide Derivatives (39)

A solution of the appropriate amine (1 equiv) and 4-(dimethylamino)pyridine (DMAP) (0.47 equiv) in dry THF (10 mL) was added dropwise to a solution of 3-bromopropionyl chloride (1.5 equiv) in THF (10 mL) cooled to 0 °C. The reaction mixture was kept under vigorous stirring at room temperature (rt) for 1 h, and was then quenched with H2O and extracted with CHCl3. The organic phase was washed with a saturated aqueous solution of NaHCO3 and brine, and dried over anhydrous Na2SO4. After the solvent was removed in vacuo, the crude product was purified by flash chromatography (cyclohexane/ethyl acetate, 80:20 v/v) to give compounds 39.
3-Bromo-N-(4-fluorophenyl)propanamide (3). White solid (76%); mp: 146.5–147.5 °C; IR (KBr) νmax 1665 cm−1; 1H NMR (DMSO, 500 MHz): δ 10.08 (1H, s, exchangeable in D2O), 7.62–7.58 (2H, m), 7.15–7.10 (2H, m), 3.71 (2H, t, J = 6.5 Hz), 2.92 (2H, t, J = 6.5 Hz); 13C NMR (DMSO, 125 MHz) δ 168.01, 158.91 (J = 238.25 Hz), 135.32, 120.83 (J = 7.75 Hz), 115.34 (J = 22.37 Hz), 39.29, 29.11; MS (EI) m/z (%) 244.9 [M + H]+, 246.9 [M + H]+.
3-bromo-N-(4-methylphenyl)propanamide (4). White solid (75%); mp: 140.0–140.6 °C; IR (KBr) νmax 1664 cm−1; 1H NMR (DMSO, 500 MHz) δ 9.89 (1H, s, exchangeable in D2O), 7.40 (2H, d, J = 8.4 Hz), 7.01 (2H, d, J = 8.4 Hz), 3.63 (2H, t, J = 6.2 Hz), 2.83 (2H, t, J = 6.2 Hz), 2.15 (3H, s); 13C NMR (DMSO, 125 MHz) δ 173.24, 141.85, 137.53, 134.36, 124.36, 44.70, 34.69, 25.80; MS (EI) m/z (%) 241.0 [M + H]+, 243.0 [M + H]+.
3-Bromo-N-(4-cyanophenyl)propanamide (5). White solid (85%); mp: 194.5–195.6 °C; IR (KBr) νmax 2222, 1669 cm−1; 1H NMR (DMSO, 500 MHz) δ 10.47 (1H, s, exchangeable in D2O), 7.78–7.75 (4H, m), 3.72 (2H, t, J = 6.5 Hz), 2.99 (2H, t, J = 6.5 Hz); 13C NMR (DMSO, 125 MHz) δ 169.05, 143.03, 133.27, 119.08, 118.97, 105.06, 39.67, 28.68; MS (EI) m/z (%) 251.9 [M + H]+, 253.9 [M + H]+.
3-Bromo-N-(4-methoxyphenyl)propanamide (6). Yellow solid (70%); mp: 107.5–108.9 °C; IR (KBr) νmax 1650 cm−1; 1H NMR (DMSO, 500 MHz) δ 9.88 (1H, s, exchangeable in D2O), 7.49 (2H, d, J = 9 Hz), 6.86 (2H, d, J = 9 Hz), 3.71 (2H, t, J = 6.5 Hz), 3.70 (3H, s), 2.89 (2H, t, J = 6.5 Hz); 13C NMR (DMSO, 125 MHz) δ 167.54, 155.19, 132.11, 120.60, 113.81, 55.11, 39.24, 29.31; MS (EI) m/z (%) 257.0 [M + H]+, 259.0 [M + H]+.
3-Bromo-1-(2,3-dihydro-1H-indol-1-yl)propan-1-one (7). White solid (79%); mp: 91.0–91.8 °C; IR (KBr) νmax 1653 cm−1; 1H NMR (CDCl3, 500 MHz) δ 8.22 (1H, d), 7.21–7.18 (2H, m), 7.04–7.01 (1H, t), 4.06 (2H, t, J = 6.8 Hz), 3.73 (2H, t, J = 6.6 Hz), 3.21 (2H, t, J = 6.8 Hz), 3.02 (2H, t, J = 6.6 Hz); 13C NMR (CDCl3, 125 MHz) δ 168.74, 142.41, 131.43, 126.91, 124.50, 123.01, 116.83, 48.53, 38.60, 31.00, 27.88; MS (EI) m/z (%) 253.0 [M + H]+, 255.0 [M + H]+..
3-Bromo-1-(3,4-dihydroquinolin-1(2H)-yl)propan-1-one (8). White solid (70%); mp: 67.5–68.5 °C; IR (KBr,) νmax 1652 cm−1; 1H NMR (CDCl3, 500 MHz) δ 7.21–7.10 (4H, m), 3.81 (2H, t, J = 6.6 Hz), 3.67 (2H, t, J = 6.8 Hz), 3.08 (2H, t, J = 6.8 Hz), 2.72 (2H, t, J = 6.6 Hz), 1.97 (2H, q, J = 6.6 Hz); 13C NMR (CDCl3, 125 MHz) δ 169.84, 138.68, 128.78, 127.67, 126,41, 125.86, 124.74, 43.35, 37.70, 28.27, 26.88, 24.22; MS (EI) m/z (%) 267.0 [M + H]+, 269.0 [M + H]+.
3-Bromo-N,N-diphenylpropanamide (9). White solid (72%); mp: 95.9–96.4 °C; IR (KBr,) νmax 1673 cm−1; 1H NMR (CDCl3, 500 MHz) δ 7.28–7.21 (10H, m), 3.65 (2H, t, J = 6.6 Hz), 2.83 (2H, t, J = 6.6 Hz); 13C NMR (CDCl3, 125 MHz) δ 169.15, 142.51, 128.86, 126.13, 125.00, 38.12, 27.57; MS (EI) m/z (%) 303.0 [M + H]+, 305.0 [M + H]+.

3.1.3. General Procedure for the Synthesis of N-Substituted (−)-Cis-N-Normetazocine Derivatives (1016)

A mixture of (˗)-cis-(1R,5R,9R)-N-Normetazocine (1 equiv), the appropriate 3-bromoamide derivatives (39, 1.5 equiv), NaHCO3 (1.5 equiv), and a catalytic amount of KI was stirred in DMF at 50 °C for 12 h. After cooling, the reaction mixture was concentrated under vacuum to remove DMF. The resulting residue was purified by flash chromatography using a silica gel column with a CHCl3/CH3OH (95:5, v/v) solvent system. Target compounds 1016 were recrystallized from absolute ethanol to give white solids.
N-(4-Fluorophenyl)-3-[(2R,6R,11R)-8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]propanamide (10). White solid (50%); mp: 199.7–201.3 °C; [ α ] D 25 = −56° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 10.23 (1H, s), 7.62 (2H, d, J = 8.8 Hz), 7.15 (2H, d, J = 8.8 Hz), 6.89 (1H, d, J = 8.4 Hz), 6.59 (1H, d, J = 2.5 Hz), 6.53 (1H, dd, J = 8.4 Hz, J = 2.5 Hz), 2.91–2.71 (3H, m), 2.62–2.44 (6H, m), 1.99–1.95 (1H, m), 1.72–1.71 (1H, m), 1.27 (3H, s), 1.20 (1H, m), 0.78 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 170.18, 158.73 (J = 240.37 Hz), 155.43, 142.28, 135.63, 127.76, 126.34, 120.70 (J = 7.75 Hz), 115.30 (J = 21.87 Hz), 112.87, 111.80, 56.88, 50.37, 44.80, 41.84, 41.26, 35.88, 34.04, 25.24, 23.20, 13.89; MS (EI) m/z (%) 383.2 [M + H]+, 229.9 [M-CH2CONHC6H4F]; anal. C, 72.11; H, 7.19; N, 7.22%, calcd for C23H27FN2O2 (382,471) C, 72.23; H, 7.12; N, 7.32%.
3-[(2R,6R,11R)-8-Hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]-N-(4-methylphenyl)propanamide (11). White solid (61%); mp: 180.5–181.8 °C; [ α ] D 25 = −51° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 10.05 (1H, s), 7.44 (2H, d, J = 8.0 Hz), 7.08 (2H, d, J = 8.0 Hz), 6.86 (1H, d, J = 8.5 Hz), 6.60 (1H, d, J = 2.5 Hz), 6.50 (1H, dd, J = 8.5 Hz, J = 2.5 Hz), 2.90 (1H, m), 2.87–2.82 (2H, m), 2.67–2.66 (2H, m), 2.58–2.49 (2H, m), 2.45-2.35 (2H, m), 2.23 (3H, s), 2.00–1.90 (1H, m), 1.692–1.632 (1H, m), 1.25 (3H, s), 1.21 (1H, m), 0.75 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 170.00, 155.44, 142.24, 136.73, 131.80, 129.04, 127.77, 126.30, 118.99, 112.88, 111.80, 56.88, 50.39, 44.80, 41.81, 41.24, 35.87, 34.95, 25.23, 23.19, 20.38, 13.87; MS (EI) m/z (%) 379.3 [M + H]+, 230.2 [M-CH2CONHC7H7]; anal. C, 76.02; H, 8.03; N, 7.22%, calcd for C24H30N2O2 (378,507) C, 76.16; H, 7.99; N, 7.40%.
N-(4-Cyanophenyl)-3-[(2R,6R,11R)-8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]propanamide (12). White solid (67%); mp: 215.1–216 °C; [ α ] D 25 = −54.5° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 10.56 (1H, s), 7.76 (4H, m), 6.87 (1H, d, J = 8.5 Hz), 6.61 (1H, d, J = 2.5 Hz), 6.51 (1H, dd, J = 8.5 Hz, J = 2.5 Hz), 2.89–2.79 (3H, m), 2.73–2.67 (2H, m), 2.59–2.46 (4H, m), 2.02–1.97 (1H, m), 1.74–1.63 (1H, m), 1.25 (3H, s), 1.22 (1H, m), 0.75 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 171.17, 155.44, 142.79, 142.24, 133.25, 127.76, 126.29, 119.04, 118.96, 112.87, 111.79, 104.67, 56.93, 50.16, 44.81, 41.78, 41.18, 35.85, 35.27, 25.21, 23.25, 13.87; MS (EI) m/z (%) 390.3 [M + H]+, 230.2 [M-CH2CONHC7H4N]; anal. C, 73.89; H, 7.05; N, 10.52%, calcd for C24H27N3O2 (389,490) C, 74.01; H, 6.99; N, 10.79%.
3-[(2R,6R,11R)-8-Hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]-N-(4-methoxyphenyl)propanamide (13). White solid (58%); mp: 172.9–173.5 °C;   [ α ] D 25 = −53° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 10.01 (s, 1H), 7.47 (2H, d, J = 9.0 Hz), 6.87 (3H, dd, J = 9.0 Hz, J = 8.4 Hz), 6.61 (1H, d, J = 2.5 Hz), 6.52 (1H, dd, J = 8.5 Hz, J = 2.5 Hz), 3.71 (3H, s), 2.90–2.89 (1H, m), 2.83–2.80 (2H, m), 2.73–2.67 (2H, m), 2.59–2.54 (2H, m), 2.41–2.40 (2H, m), 2.01–1.97 (1H, m), 1.75–1.65 (1H, m), 1.26 (3H, s), 1.25–1.23 (1H, m), 0.76 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 169.72, 155.43, 154.98, 142.26, 132.42, 127.76, 126.32, 120.48, 113.81, 112.87, 111.79, 56.86, 55.10, 50.43, 44.78, 41.80, 41.25, 35.87, 34.87, 25.22, 23.15, 13.87; MS (EI) m/z (%) 395.3 [M + H]+, 230.3 [M-CH2CONHC7H7O]; anal. C, 73.00; H, 7.68; N, 7.08%, calcd for C24H27N3O2 (394,506) C, 73.07; H, 7.66; N, 7.10%.
1-(2,3-Dihydro-1H-indol-1-yl)-3-[(2R,6R,11R)-8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]propan-1-one (14). White solid (56%); mp: 169 °C dec; [ α ] D 25 = −38.5° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 8.07 (1H, d), 7.22 (1H, d, J = 7.4 Hz), 7.14 (1H, t, J = 7.8 Hz), 6.98 (1H, t, J = 7.4 Hz), 6.89 (1H, d, J = 8.4 Hz), 6.61 (1H, d, J = 2.2 Hz), 6.52 (1H, dd, J = 8.4 Hz, J = 2.2 Hz), 4.11 (2H, t, J = 8.5 Hz), 3.13 (2H, t, J = 8.5 Hz), 2.89–2.81 (3H, m), 2.68–2.64 (2H, m), 2.55–2.50 (4H, m), 2.00–1.98 (1H, m), 1.74–1.64 (1H, m), 1.26 (3H, s), 1.20 (1H, m), 0.76 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 172.30, 153.70, 147.02, 142.50, 134.13, 128.17, 127.52, 126.76, 124.68, 123.64, 116.40, 112.83, 111.76, 57.20, 47.07, 46.71, 46.46, 40.26, 38.50, 35.75, 33.67, 28.21, 25.46, 22.59, 14.52; MS (EI) m/z (%) 391.5 [M + H]+, 230.1 [M-CH2CONC8H8]; anal. C, 76.68; H, 7.90; N, 7.05%, calcd for C25H30N2O2 (390,518) C, 76.89; H, 7.74; N, 7.17%.
1-(3,4-Dihydroquinolin-1(2H)-yl)-3-[(2R,6R,11R)-8-hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]-propan-1-one (15). White solid (42%); mp: 92.2 °C dec; [ α ] D 25 = −37° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 7.37 (1H, d, J = 8.0 Hz), 7.19–7.07 (3H, m), 6.82 (1H, d, J = 8.2 Hz), 6.56 (1H, d, J = 2.4 Hz), 6.47 (1H, dd, J = 8.2 Hz, J = 2.2 Hz), 3.66 (2H, t, J = 6.4 Hz), 2.75–2.67 (5H, m), 2.63–2.46 (4H, m), 2.30–2.26 (2H, m), 1.91–1.84 (2H, m), 1.65–1.56 (2H, m), 1.21 (3H, s), 1.11 (1H, m), 0.69 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 171.25, 155.39, 142.27, 139.10, 138.91, 128.37, 127.72, 126.34, 126.12, 125.68, 124.64, 112.83, 111.76, 57.20, 51.00, 47.01, 45.09, 41.76, 41.14, 35.75, 35.07, 32.67, 26.21, 25.25, 23.68, 23.19, 13.82; MS (EI) m/z (%) 405.1 [M + H]+, 230.1 [M-CH2CONC9H10]; anal. C, 77.03; H, 8.05; N, 6.78%, calcd for C26H32N2O2 (404,544) C, 77.19; H, 7.97; N, 6.92%.
3-[(2R,6R,11R)-8-Hydroxy-6,11-dimethyl-1,4,5,6-tetrahydro-2,6-methano-3-benzazocin-3(2H)-yl]-N,N-diphenylpropanamide (16). White solid (70%); mp: 173.5 °C dec;   [ α ] D 25 = −32° (c 1.0, MeOH); 1H NMR (DMSO, 500 MHz) δ 7.40–7.32 (10H, m), 6.84 (1H, d, J = 8.5 Hz), 6.58 (1H, d, J = 2.5 Hz), 6.49 (1H, dd, J = 8.4 Hz, J = 2.5 Hz), 2.80–2.73 (1H, m), 2.70–2.67 (2H, m), 2.60–2.56 (1H, m), 2.49–2.45 (1H, m), 2.33–2.23 (2H, m), 1.92–1.88 (2H, m), 1.71–1.70 (1H, m), 1.65–1.59 (1H, m), 1.25 (3H, s), 1.15 (1H, m), 0.73 (3H, d, J = 5 Hz); 13C NMR (DMSO, 125 MHz) δ 171.24, 155.38, 143.04, 142.31, 128.46, 127.71, 126.39, 126.15, 125.00, 112.82, 111.76, 57.27, 50.79, 45.04, 41.76, 41.12, 35.81, 33.42, 25.25, 23.36, 13.87; MS (EI) m/z (%) 441.4 [M + H]+, 230.1 [M-CH2CONC12H10]; anal. C, 79.32; H, 7.54; N, 6.44%, calcd for C29H32N2O2 (440,576) C, 79.06; H, 7.32; N, 6.36%.

3.2. Biological Assays

3.2.1. Drugs and Reagents

[3H]-Diprenorphine ([3H]-DPN) (42.30 Ci/mmol) was purchased from Perkin Elmer Life Sciences (NET11212, 250μCi, Boston, MA, USA) and naloxone hydrochloride was purchased from Sigma-Aldrich (St. Louis, MO, USA). DPDPE ([D-Pen2,D-Pen5]enkephalin) and dynorphin A were purchased from Neosystem. Dermorphin was prepared and purified in house as previously described [26]. Stock solutions (10 mM) of peptides were made in distilled water, while LP1 and its derivatives in DMSO and kept at −20 °C until use. The compounds were solubilized in saline at 1 μM, with the only exception of naloxone, which was at 10 μM. Successive dilutions of standard ligands were made in saline, whereas LP1 and its analogues were solubilized in HBSS (Hank’s balanced salt solution)/HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) (20 mM) buffer (containing 0.005% bovine serum albumin (BSA) fraction V). Tissue culture media and supplements were from Invitrogen (Carlsbad, CA, USA) and from Cambrex Bioscience (Walkersville, MD, USA).

3.2.2. Cell Membrane Preparations

Confluent monolayers of HEK293 (human embryonic kidney 293) cells stably expressing rat-MOR, rat-DOR, or human-KOR were harvested, collected by centrifugation at 1500 rpm for 5 min, and washed once with phosphate-buffered saline (PBS) at pH 7.5. Membranes from cell pellets were carried out as described by Georgoussi and Zioudrou [25] (1993) and Papakonstantinou et al. [20] (2015). Briefly, cell pellets were resuspended in ice-cold membrane buffer (10 mM Tris-HCl, pH 7.5 and 0.1 mM EDTA), homogenized, and centrifuged at 2,000 g for 3 min at 4 °C. Supernatants were further centrifuged at 45,000 rpm for 30 min at 4 °C. The membrane pellet was resuspended in ice-cold membrane buffer at a protein concentration of approximately 1 mg/mL and stored in aliquots at −70 °C. Protein concentration was determined according to Bradford assay [27,28].

3.2.3. In Vitro Competition Radioligand Binding Assay

In the experiments designed to define compound affinity and selectivity for MOR, DOR, and KOR, membranes expressing each of these opioid receptors (20 mg) were incubated at 30 °C for 45 min in buffer containing 50 mM Tris-HCl, pH 7.5, 100 mM NaCl, and 10 mM MgCl2 as described by Georgoussi et al. [29] (1997). The ability of compounds 1016 to displace [3H]-DPN (3.75 nM) binding to the opioid receptors was assessed as described by Morou And Georgoussi [30] (2005). Non-specific binding was measured in the presence of 10 mΜ Naloxone. The reaction was stopped by rapid filtration and three washes in ice-cold 50 mM Tris-HCl, pH 7.4, through GF/C filters (Whatman, Maidstone, UK) using an automated cell harvester (Brandel Inc., Gaithersburg, MD, USA). The radioactivity was measured by liquid scintillation counting (Liquid Scintillation Analyzer, Packard).

3.2.4. Transfection Procedures and Cell Culture

Chinese hamster ovary (CHO) cells expressing the recombinant human MOR and KOR (CHOMOR and CHOKOR) were kindly provided by Dr. Larry Toll (SRI International, Menlo Park, CA, USA), and CHO cells expressing the recombinant human DOR (CHODOR) were supplied by Dr. Eva Varga (Department of Medical Pharmacology, The University of Arizona, Tucson, AZ, USA). CHO cells lines permanently coexpressing the opioid receptors and the C-terminally modified Gαqi5 were prepared by infecting the CHO lines described above with a recombinant retrovirus expressing the chimeric α subunit and the hygromycin resistance gene. Similarly, CHO cells lines permanently coexpressing DOR and the C-terminally modified GαqG66Di5 were prepared by infecting the CHO lines described above with a recombinant retrovirus expressing the chimeric α subunit and the hygromycin resistance gene. Polyclonal cell lines were generated using the pantropic retroviral expression system form BD-Clontech, as described previously. Stable lines were selected under hygromycin B (100 μg/mL) and geneticin (600 μg/mL) for 2–3 weeks after the infection.

3.2.5. Cell Culture and Calcium Mobilization Experiments

CHO cells, expressing human opioid receptors and the Gαqi5 protein, and CHODOR, expressing the GαqG66Di5 protein, were maintained in culture medium consisting of Dulbecco minimum essential medium (DMEM) and Ham F-12 (1:1) (50/50) supplemented with 10% fetal calf serum (FCS), L-glutamine (2 mM), geneticin (200 μg/mL; G418), hygromycin B (100 μg/mL) at 37 °C in 5% CO2 humidified air. When confluence was reached (3–4 days), cells were subcultured as required using trypsin/EDTA, and used for experimentation. The different cell lines were seeded at a density of 50,000–40,000 cells/well into black 96-well, clear-bottomed plates. After 24 h incubation, the cells were loaded with medium supplemented with 2.5 mM probenecid, 3 μM of the calcium sensitive fluorescent dye Fluo-4 AM, and 0.01% pluronic acid, for 30 min at 37 °C. Afterwards, the loading solution was aspirated and 100 μL/well of assay buffer—HBSS supplemented with 20 mM HEPES, 2.5 mM probenecid and 500 μM Brilliant Black (Aldrich, St. Louis, MO, USA)—was added. Serial dilutions of ligands for experimental use were made in HBSS/HEPES (20 mM) buffer (containing 0.005% BSA fraction V). After placing both plates (cell culture and compound plate) into the FlexStation II (Molecular Device, Union City, San Jose, CA 94587, USA), fluorescence changes were measured at room temperature. Online additions were carried out in a volume of 50 μL/well. Antagonists were incubated 15 min before the addition of the agonist. Maximum change in fluorescence, expressed in percent of baseline fluorescence, was used to determine agonist response.

3.2.6. Data Analysis

Analysis of the binding data was performed using the Origin 7.5 software (OriginLab Corporation, Northampton, MA, USA). In calcium mobilization experiments, data were analyzed by non-linear curve fitting equation, using GraphPad 5.0 software. For potency values, 95% confidence limits (CL95%) were indicated. Ligand efficacy was expressed as intrinsic activity (α), calculated as the ratio between the Emax of the ligand and that of the respective standards. Calcium mobilization data were expressed as FIU (fluorescence intensity units) in percent, over the baseline. Agonist potencies are given as pEC50 (the negative logarithm to base 10 of the molar concentration of an agonist that produces 50% of the maximal possible effect, Emax). Concentration response curves to agonists were fitted with the following equation:
Effect   =   baseline   +   ( E max     baseline ) / ( 1 + 10 ( LogEC 50     X )     HillSlope )
where X is the agonist concentration.
Antagonist potencies were derived from inhibition experiments and expressed as pKB calculated from the following equation:
K B   =   IC 50 / ( [ 2   + ( [ A ] / EC 50 ) n ] 1 / n )     1
where IC50 is the concentration of antagonist that produces 50% inhibition of the agonist response, [A] is the concentration of agonist, EC50 is the concentration of agonist producing a 50% maximal response, and n is the Hill coefficient of the concentration response curve to the agonist.

4. Conclusions

Here, to improve the body of information on (−)-cis-N-Normetazocine-based compounds SARs, the synthesis and in vitro characterization of a new series of compounds (1016) were reported. Collectively, our data corroborated the importance of the phenyl ring in the N-propanamido substituent of the (−)-cis-N-Normetazocine scaffold of the reference compound LP1 for MOR and DOR functional profile. Although all synthesized compounds, in comparison to the lead compound LP1, exhibited a worse efficacy profile, they could represent a template in the achievement of a specific functional profile, by modifying N-substituent electronic and steric features.

Author Contributions

R.T., C.P. and L.P. designed and performed chemistry and in vitro experiments; P.P. and Z.G. designed and performed radioligand binding assay; G.C., V.C. and E.A. designed and performed calcium mobilization experiments; L.P., C.P., R.T., E.A. and L.M. participated in the analysis and interpretation of data. R.T., C.P. and L.P. wrote the manuscript. All the authors read and approved the final manuscript.

Acknowledgments

This work was supported by University of Catania (PdR 2016–2018) to Lorella Pasquinucci. The authors gratefully acknowledge Fabbrica Italiana Sintetici (Italy) for providing (±)-cis-N-Normetazocine.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Janecka, A.; Fichna, J.; Janecki, T. Opioid receptors and their ligands. Curr. Top. Med. Chem. 2004, 4, 1–17. [Google Scholar] [CrossRef] [PubMed]
  2. Turnaturi, R.; Aricò, G.; Ronsisvalle, G.; Parenti, C.; Pasquinucci, L. Multitarget opioid ligands in pain relief: New players in an old game. Eur. J. Med. Chem. 2016, 108, 211–228. [Google Scholar] [CrossRef] [PubMed]
  3. Turnaturi, R.; Aricò, G.; Ronsisvalle, G.; Pasquinucci, L.; Parenti, C. Multitarget Opioid/Non-opioid Ligands: A Potential Approach in Pain Management. Curr. Med. Chem. 2016, 23, 4506–4528. [Google Scholar] [CrossRef] [PubMed]
  4. Turnaturi, R.; Pasquinucci, L.; Parenti, C. From Plant to Bench: Natural Products as Source for Analgesic Drug Development. Front. Nat. Prod. Chem. 2018. submitted for publication. [Google Scholar]
  5. Pathan, H.; Williams, J. Basic opioid pharmacology: An update. Br. J. Pain 2012, 6, 11–16. [Google Scholar] [CrossRef] [PubMed]
  6. Ghelardini, C.; Di Cesare Mannelli, L.; Bianchi, E. The pharmacological basis of opioids. Clin. Cases Miner. Bone Metab. 2015, 12, 219–221. [Google Scholar] [CrossRef] [PubMed]
  7. Zadina, J.E.; Martin-Schild, S.; Gerall, A.A.; Kastin, A.J.; Hackler, L.; Ge, L.J.; Zhang, X. Endomorphins: Novel endogenous mu-opiate receptor agonists in regions of high mu-opiate receptor density. Ann. N. Y. Acad. Sci. 1999, 897, 136–144. [Google Scholar] [CrossRef] [PubMed]
  8. Shulgin, A.T. Drugs of abuse in the future. Clin. Toxicol. 1975, 8, 405–456. [Google Scholar] [CrossRef] [PubMed]
  9. Pasquinucci, L.; Iadanza, M.; Marrazzo, A.; Prezzavento, O.; Ronsisvalle, S.; Scoto, G.M.; Parenti, C.; De Luca, L.; Ronsisvalle, G. New benzomorphan derivatives of MPCB as MOP and KOP receptor ligands. Pharmazie 2007, 62, 813–824. [Google Scholar] [CrossRef] [PubMed]
  10. Metcalf, M.D.; Aceto, M.D.; Harris, L.S.; Woods, J.H.; Traynor, J.R.; Coop, A.; May, E.L. The influence of esters and carboxylic acids as the N-substituent of opioids. Part 1: Benzomorphans. Bioorg. Med. Chem. 2008, 16, 869–873. [Google Scholar] [CrossRef] [PubMed]
  11. May, E.L.; Jacobson, A.E.; Mattson, M.V.; Traynor, J.R.; Woods, J.H.; Harris, L.S.; Bowman, E.R.; Aceto, M.D. Synthesis and in vitro and in vivo activity of (−)-(1R,5R,9R)- and (+)-(1S,5S,9S)-N-Alkenyl-, -N-Alkynyl-, and -N-Cyanoalkyl-5, 9-dimethyl-2’-hydroxy-6,7-benzomorphan homologues. J. Med. Chem. 2000, 43, 5030–5036. [Google Scholar] [CrossRef] [PubMed]
  12. Turnaturi, R.; Marrazzo, A.; Parenti, C.; Pasquinucci, L. Benzomorphan scaffold for opioid analgesics and pharmacological tools development: A comprehensive review. Eur. J. Med. Chem. 2018, 148, 410–422. [Google Scholar] [CrossRef] [PubMed]
  13. Dortch-Carnes, J.; Potter, D.E. Bremazocine: A kappa-opioid agonist with potent analgesic and other pharmacologic properties. CNS Drug Rev. 2005, 11, 195–212. [Google Scholar] [CrossRef] [PubMed]
  14. Pasquinucci, L.; Prezzavento, O.; Marrazzo, A.; Amata, E.; Ronsisvalle, S.; Georgoussi, Z.; Fourla, D.D.; Scoto, G.M.; Parenti, C.; Aricò, G.; et al. Evaluation of N-substitution in 6,7-benzomorphan compounds. Bioorg. Med. Chem. 2010, 18, 4975–4982. [Google Scholar] [CrossRef] [PubMed]
  15. Parenti, C.; Turnaturi, R.; Aricò, G.; Marrazzo, A.; Prezzavento, O.; Ronsisvalle, S.; Scoto, G.M.; Ronsisvalle, G.; Pasquinucci, L. Antinociceptive profile of LP1, a non-peptide multitarget opioid ligand. Life Sci. 2012, 90, 957–961. [Google Scholar] [CrossRef] [PubMed]
  16. Pasquinucci, L.; Parenti, C.; Turnaturi, R.; Aricò, G.; Marrazzo, A.; Prezzavento, O.; Ronsisvalle, S.; Georgoussi, Z.; Fourla, D.D.; Scoto, G.M.; et al. The benzomorphan-based LP1 ligand is a suitable MOR/DOR agonist for chronic pain treatment. Life Sci. 2012, 90, 66–70. [Google Scholar] [CrossRef] [PubMed]
  17. Parenti, C.; Turnaturi, R.; Aricò, G.; Gramowski-Voss, A.; Schroeder, O.H.; Marrazzo, A.; Prezzavento, O.; Ronsisvalle, S.; Scoto, G.M.; Ronsisvalle, G.; et al. The multitarget opioid ligand LP1's effects in persistent pain and in primary cell neuronal cultures. Neuropharmacology 2013, 71, 70–82. [Google Scholar] [CrossRef] [PubMed]
  18. Pasquinucci, L.; Turnaturi, R.; Aricò, G.; Parenti, C.; Pallaki, P.; Georgoussi, Z.; Ronsisvalle, S. Evaluation of N-substituent structural variations in opioid receptor profile of LP1. Bioorg. Med. Chem. 2016, 24, 2832–2842. [Google Scholar] [CrossRef] [PubMed]
  19. Turnaturi, R.; Parenti, C.; Prezzavento, O.; Marrazzo, A.; Pallaki, P.; Georgoussi, Z.; Amata, E.; Pasquinucci, L. Synthesis and Structure-Activity Relationships of LP1 Derivatives: N-Methyl-N-phenylethylamino Analogues as Novel MOR Agonists. Molecules 2018, 23, E677. [Google Scholar] [CrossRef] [PubMed]
  20. Pasquinucci, L.; Turnaturi, R.; Prezzavento, O.; Arena, E.; Aricò, G.; Georgoussi, Z.; Parenti, R.; Cantarella, G.; Parenti, C. Development of novel LP1-based analogues with enhanced delta opioid receptor profile. Bioorg. Med. Chem. 2017, 25, 4745–4752. [Google Scholar] [CrossRef] [PubMed]
  21. Accolla, M.L.; Turnaturi, R.; Sarpietro, M.G.; Ronsisvalle, S.; Castelli, F.; Pasquinucci, L. Differential scanning calorimetry approach to investigate the transfer of the multitarget opioid analgesic LP1 to biomembrane model. Eur. J. Med. Chem. 2014, 77, 84–90. [Google Scholar] [CrossRef] [PubMed]
  22. Vandormael, B.; Fourla, D.D.; Gramowski-Voss, A.; Kosson, P.; Weiss, D.G.; Schröder, O.H.; Lipkowski, A.; Georgoussi, Z.; Tourwé, D. Superpotent [Dmt¹] dermorphin tetrapeptides containing the 4-aminotetrahydro-2-benzazepin-3-one scaffold with mixed μ/δ opioid receptor agonistic properties. J. Med. Chem. 2011, 54, 7848–7859. [Google Scholar] [CrossRef] [PubMed]
  23. Papakonstantinou, M.P.; Karoussiotis, C.; Georgoussi, Z. RGS2 and RGS4 proteins: New modulators of the κ-opioid receptor signaling. Cell Signal. 2015, 27, 104–114. [Google Scholar] [CrossRef] [PubMed]
  24. Camarda, V.; Calò, G. Chimeric G proteins in fluorimetric calcium assays: Experience with opioid receptors. Methods Mol. Biol. 2013, 937, 293–306. [Google Scholar] [CrossRef] [PubMed]
  25. Georgoussi, Z.; Zioudrou, C. Effect of delta-opioid antagonists on the functional coupling between opioid receptors and G-proteins in rat brain membranes. Biochem. Pharmacol. 1993, 45, 2405–2410. [Google Scholar] [CrossRef]
  26. Guerrini, R.; Calò, G.; Rizzi, A.; Bianchi, C.; Lazarus, L.H.; Salvadori, S.; Temussi, P.A.; Regoli, D. Address and message sequences for the nociceptin receptor: A structure-activity study of nociceptin-(1-13)-peptide amide. J. Med. Chem. 1997, 40, 1789–1793. [Google Scholar] [CrossRef] [PubMed]
  27. Bradford, M.M. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal. Biochem. 1976, 72, 248–254. [Google Scholar] [CrossRef]
  28. Prezzavento, O.; Arena, E.; Parenti, C.; Pasquinucci, L.; Aricò, G.; Scoto, G.M.; Grancara, S.; Toninello, A.; Ronsisvalle, S. Design and synthesis of new bifunctional sigma-1 selective ligands with antioxidant activity. J. Med. Chem. 2013, 56, 2447–2455. [Google Scholar] [CrossRef] [PubMed]
  29. Georgoussi, Z.; Merkouris, M.; Mullaney, I.; Megaritis, G.; Carr, G.; Zioudrou, C.; Milligan, G. Selective interactions of the μ-opioid receptors with pertussis toxin-sensitive G proteins: Involvement of the third intracellular loop and the C-terminal tail in coupling. Biochem. Biophys. Acta 1997, 1359, 263–274. [Google Scholar] [CrossRef]
  30. Morou, E.; Georgoussi, Z. Expression of the third intracellular loop of the delta-opioid receptor inhibits signaling by opioid receptors and other G protein-coupled receptors. J. Pharmacol. Exp. Ther. 2005, 315, 1368–1379. [Google Scholar] [CrossRef] [PubMed]
Figure 1. LP1 (1) and its N-analogue (2) structures.
Figure 1. LP1 (1) and its N-analogue (2) structures.
Pharmaceuticals 11 00040 g001
Figure 2. LP1 N-derivatives 10–16 structures.
Figure 2. LP1 N-derivatives 10–16 structures.
Pharmaceuticals 11 00040 g002
Scheme 1. Synthetic pathway.
Scheme 1. Synthetic pathway.
Pharmaceuticals 11 00040 sch001
Table 1. Opioid receptor binding affinity values of LP1, and its derivatives 2 and 1016.
Table 1. Opioid receptor binding affinity values of LP1, and its derivatives 2 and 1016.
CompoundKi (μM) ± SEM a,b
MORDORKOR
LP1 (1)0.049 ± 0.0150.033 ± 0.0207.500 ± 0.015
2 [18]0.038±0.0040.210 ± 0.0300.800 ± 0.016
100.280 ± 0.0130.920 ± 0.1204.800 ± 0.950
110.240 ± 0.0150.410 ± 0.0231.010 ± 0.110
120.210 ± 0.0240.380 ± 0.0340.850 ± 0.180
130.180 ± 0.0111.100 ± 0.1104.000 ± 0.180
140.400 ± 0.0301.400 ± 0.1201.600 ± 0.120
150.360 ± 0.023NDc0.200 ± 0.020
160.170 ± 0.013ND0.200 ± 0.030
a Values are means ± SEM of three separate experiments, each carried out in duplicate; b Ki values were obtained as [3H]-DPN displacement for MOR, DOR, and KOR; c ND not determined.
Table 2. Effects of LP1 and its derivatives 2 and 1016 in CHO cells expressing Gαqi5 or GαqG66Di5 chimeric G protein and recombinant human opioid receptors in the calcium mobilization assay.
Table 2. Effects of LP1 and its derivatives 2 and 1016 in CHO cells expressing Gαqi5 or GαqG66Di5 chimeric G protein and recombinant human opioid receptors in the calcium mobilization assay.
CompoundMORDORKOR
pEC50
(CL95%) a
pKB b
(CL95%)
pEC50
(CL95%) a
pKB b
(CL95%)
pEC50
(CL95%) a
pKB b
(CL95%)
LP1 (1)7.01
(6.29–7.73)
ND c5.95 (5.39–6.51)NDcrc incomplete dND
2Inactive e7.90
(7.30–8.50)
Inactive6.78
(6.15–7.41)
Inactive5.86
(4.89–6.83)
105.67
(4.82–6.52)
NDcrc incompleteInactivecrc incompleteND
115.85
(5.34–6.36)
NDInactive5.83
(5.53–6.13)
Inactive5.85
(5.65–6.05)
125.99
(5.46–6.52)
NDInactive5.82
(5.18–6.46)
Inactive5.90
(5.40–6.40)
13Inactive6.30
(5.81–6.79)
InactiveInactiveInactiveInactive
14Inactive5.94
(5.26–6.62)
InactiveInactiveInactiveInactive
15Inactive5.71
(4.63–6.18)
InactiveInactive6.59
(6.35–6.83)
ND
16Inactive6.12
(5.46–6.78)
InactiveInactiveInactive6.11
(5.78–6.44)
Data are mean ± SEM of at least five separate experiments. a For pEC50 and pKB values, the 95% confidence limits are given in brackets; b The antagonistic properties of these compounds were tested using dermorphin, DPDPE, and dynorphin A as agonists; c ND: not determined; d incomplete concentration response curves at 10 μM; e inactive compound at 10 μM.

Share and Cite

MDPI and ACS Style

Pasquinucci, L.; Parenti, C.; Amata, E.; Georgoussi, Z.; Pallaki, P.; Camarda, V.; Calò, G.; Arena, E.; Montenegro, L.; Turnaturi, R. Synthesis and Structure-Activity Relationships of (−)-cis-N-Normetazocine-Based LP1 Derivatives. Pharmaceuticals 2018, 11, 40. https://doi.org/10.3390/ph11020040

AMA Style

Pasquinucci L, Parenti C, Amata E, Georgoussi Z, Pallaki P, Camarda V, Calò G, Arena E, Montenegro L, Turnaturi R. Synthesis and Structure-Activity Relationships of (−)-cis-N-Normetazocine-Based LP1 Derivatives. Pharmaceuticals. 2018; 11(2):40. https://doi.org/10.3390/ph11020040

Chicago/Turabian Style

Pasquinucci, Lorella, Carmela Parenti, Emanuele Amata, Zafiroula Georgoussi, Paschalina Pallaki, Valeria Camarda, Girolamo Calò, Emanuela Arena, Lucia Montenegro, and Rita Turnaturi. 2018. "Synthesis and Structure-Activity Relationships of (−)-cis-N-Normetazocine-Based LP1 Derivatives" Pharmaceuticals 11, no. 2: 40. https://doi.org/10.3390/ph11020040

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop