Modelling of Amperometric Biosensors in the Case of Substrate Inhibition
AbstractThe response of an amperometric biosensor at mixed enzyme kinetics anddiffusion limitations was modelled digitally in the case of substrate inhibition. Digitalsimulations were carried out using a finite difference technique. Calculations showedcomplex kinetics of biosensor response. At low enzyme activity and substrate concentration(S0), the response of the sensor looks like it is limited by a simple substrate diffusion. Atsubstrate concentration comparable to the Michaelis-Menten constant (KM), the responsechange shows a maximal value. A sharp response change was indicated at high enzymeactivity and high (4.9 > S0/KM > 4.5) substrate concentration. This was explained by multiconcentrationof substrate generation inside the enzyme layer. This conclusion wasconfirmed by the analytical solution of the simplified biosensor model with externaldiffusion limitation at steady-state conditions. The complex kinetics of response changeproduces different calibration graphs for biosensor response at transition and steady state. View Full-Text
Scifeed alert for new publicationsNever miss any articles matching your research from any publisher
- Get alerts for new papers matching your research
- Find out the new papers from selected authors
- Updated daily for 49'000+ journals and 6000+ publishers
- Define your Scifeed now
Kulys, J.; Baronas, R. Modelling of Amperometric Biosensors in the Case of Substrate Inhibition. Sensors 2006, 6, 1513-1522.
Kulys J, Baronas R. Modelling of Amperometric Biosensors in the Case of Substrate Inhibition. Sensors. 2006; 6(11):1513-1522.Chicago/Turabian Style
Kulys, Juozas; Baronas, Romas. 2006. "Modelling of Amperometric Biosensors in the Case of Substrate Inhibition." Sensors 6, no. 11: 1513-1522.