Next Article in Journal / Special Issue
Circuit and Noise Analysis of Odorant Gas Sensors in an E-Nose
Previous Article in Journal / Special Issue
In-situ LIF Analysis of Biological and Petroleum-based Hydraulic Oils on Soil
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Phytochelatin Modified Electrode Surface as a Sensitive Heavy- Metal Ion Biosensor

1
Department of Chemistry and Biochemistry and 6 Botany and Plant Physiology, Mendel University of Agriculture and Forestry, Zemedelska 1, 611 37 Brno, Czech Republic
2
Univ. Karlsruhe, Zool. Inst. Okol Parasitol 1, Karlsruhe, D-76128 Germany
3
Department of Theoretical and Physical Chemistry, Masaryk University, Faculty of Science, Kotlarska 2, 611 37 Brno, Czech Republic
4
Department of Analytical Chemistry, Masaryk University, Faculty of Science, Kotlarska 2, 611 37 Brno, Czech Republic
5
Laboratory of Biophysical Chemistry and Molecular Oncology, Institute of Biophysics, Academy of Sciences of the Czech Republic, Kralovopolska 135, Brno 612 65, Czech Republic
*
Author to whom correspondence should be addressed.
Sensors 2005, 5(1), 70-84; https://doi.org/10.3390/s5010070
Submission received: 6 September 2004 / Accepted: 18 November 2004 / Published: 28 February 2005
(This article belongs to the Special Issue Sensors for Environmental Monitoring)

Abstract

:
Electrochemical biosensors have superior properties over other existing measurement systems because they can provide rapid, simple and low-cost on-field determination of many biological active species and a number of dangerous pollutants. In our work, we suggested a new heavy metal biosensor based on interaction of heavy metal ions (Cd2+ and Zn2+) with phytochelatin, which was adsorbed on the surface of the hanging mercury drop electrode, using adsorptive transfer stripping differential pulse voltammetry. In addition, we applied the suggested technique for the determination of heavy metals in a biological sample – human urine and platinum in a pharmaceutical drug. The detection limits (3 S/N) of Cd(II), Zn(II) and cis-platin were about 1.0, 13.3 and 1.9 pmole in 5 μl, respectively. On the basis of the obtained results, we propose that the suggested technique offers simple, rapid, and low-cost detection of heavy metals in environmental, biological and medical samples.

Introduction

Industries produce a number of undesirable species such as pesticides, toxic organic compounds, heavy metals and so on [1-5]. An increasing concentration of heavy metals in the environment is a serious problem for human and animal health protection and production of foodstuffs in many countries around the world [6-8]. That is why easy and quick detection of heavy metals at very low concentrations levels in environmental and biological samples is necessary for assurance against acute intoxications and, first of all, against long-time exposure that may lead to many diseases and death [9-10]. Several analytical methods such as atomic absorption spectrometry [11-13], inductively coupled plasma with mass spectrometry [14-16] as well as electrochemistry [17-21], have been developed for these purposes. Electrochemical biosensors have superior properties over the other existing measurement systems because they can provide rapid, simple and low-cost on-field determination of many biological active species and number of dangerous pollutants [22-29]. In addition, biosensor technology is a powerful alternative to conventional analytical techniques, combining the specificity and sensitivity of biological systems in small devices. A number of recently published papers describe the determination of heavy metals using electrochemical biosensors based on their interactions with DNA [26,29-33], enzymes (first of all urease) [34-38], bacteria [39-41] and proteins [42-43].
Besides high molecular species – proteins such as metallothionein – it is possible to use low molecular heavy metal binding compounds such as phytochelatins (PCs) for construction of biosensors. PCs, cysteine-rich small peptides, consist of 4-23 amino acids abounding in plants as a response on heavy metal stress [44-47], participate in the detoxification of heavy metals, because they have an ability to transport heavy metal ions to vacuole [45,48], where an immediate toxicity do not menace yet. Phytochelatins have a basic formula (γ-Glu-Cys)n-Gly (n = 2 to 11) and with the presented heavy metals (M) form M-PC complexes, in which the metal is bind via SH group of cysteine unit [48-49]; see Figure 1A. PCs are synthesized from glutathione, which is catalysed by PC synthase (γ-glutamylcysteine dipeptidyltranspeptidase, EC 2.3.2.15) activated by an increased concentration of the heavy metal (Cd, Cu, Hg, As or Pb) in a plant cytoplasm [47]. Reduced glutathione (GSH) itself plays the important role in cell protection against heavy metals, and reactive oxygen species (ROS) that are able to oxidize GSH to GSSG (oxidized glutathione; disulfide glutathione) [50]. The GSH:GSSG ratio was found as an indicator of cell damage and some diseases [50,51].
The aim of this paper was to suggest a new heavy metal biosensor based on interaction of heavy metal (cadmium and zinc) with phytochelatin using adsorptive transfer stripping (AdTS) differential pulse voltammetry (DPV). The basic scheme of the proposed heavy metals biosensor is shown in Figure 1B.

Materials and methods

Chemicals

Phytochelatin (γ-Glu-Cys)2-Gly (PC2) was synthesized in Clonestar Biotech; purity over 90% (Brno, Czech Republic). Tris(2-carboxyethyl)phosphine is produced by Molecular Probes (Evgen, Oregon, USA). Sodium chloride, cadmium nitrate, zinc nitrate and other used chemicals were purchased from Sigma Aldrich. The stock standard solutions of PC2 at 10 μg.ml-1 were prepared by ACS water (Sigma-Aldrich, USA) and stored in the dark at -20 °C. Working standard solutions were prepared daily by dilution of the stock solutions. The pH value was measured using WTW inoLab Level 3 with terminal Level 3 (Weilheim, Germany), controlled by personal computer program (MultiLab Pilot; Weilheim, Germany). The pH electrode (SenTix- H, pH 0–14/3M KCl) was regularly calibrated by set of WTW buffers (Weilheim, Germany).

Electrochemical measurements

Electrochemical measurements were performed with AUTOLAB Analyser (EcoChemie, Netherlands) connected to VA-Stand 663 (Metrohm, Switzerland), using a standard cell with three electrodes. The working electrode was a hanging mercury drop electrode (HMDE) with a drop area of 0.4 mm2. The reference electrode was an Ag/AgCl/3M KCl electrode and the auxiliary electrode was a graphite electrode. The supporting electrolyte was prepared by mixing buffer components. The analyzed samples were deoxygenated prior to measurements by purging with argon (99.999%) saturated with water for 240 s.

-Adsorptive transfer stripping (AdTS) differential pulse voltammetry (DPV) of phytochelatin

The amount of PC2 was measured using AdTS DPV. The samples of the PC2 were reduced before each measurement by 1 mM tris(2-carboxyethyl)phosphine addition according to [52]. The supporting electrolyte (sodium chloride: 0.5 M NaCl, pH 6.4) from Sigma Aldrich in ACS purity was purchased. DPV parameters were as follows: an initial potential of –1.2 V, an end potential –0.3 V, a modulation time 0.057 s, a time interval 0.2 s, a step potential of 1.05 mV/s, a modulation amplitude of 250 mV. All experiments were carried out at room temperature. For smoothing and baseline correction the software GPES 4.4 supplied by EcoChemie was employed.

Real samples

-Preparation of human urine

Human urine (obtained from healthy laboratory staff) was filtered through a Teflon disc filter (0.45 μm and 13 mm diameter, Alltech Associates, Deerfield, Il, USA) and 10 times diluted with 0.5 M sodium chloride (pH 6.4) before measurements. Moreover, we added to 10 times diluted solution of human urine Cd(II) and/or Zn(II) at 25, 50, 100, 225, 400, 600 and/or 50, 100, 200, 400, 600, 800 μM concentrations, respectively.

-Preparation of cis-platin – pharmaceutical drug

cis-Platin was synthesized and provided by Pliva-Lachema (Brno, Czech Republic) [53]. The stock standard solutions of cis-platin at 10 μg.ml-1 were prepared by sodium chloride solution (0.5 M, pH 6.4) and stored in the dark at -20 °C. Working standard solutions were prepared daily by dilution of the stock solutions.

Statistical analysis

STATGRAPHICS® (Statistical Graphics Corp®, USA) was used for statistical analyses. Results are expressed as mean ± S.D. unless noted otherwise. A value of p < 0.05 was considered significant.

Results and discussion

Papers concerning the construction of heavy metals biosensors, where fungi, bacteria, proteins or peptides served as biological part of these sensors, were recently published [3,30,33-34,38,40-43,54-62]. Due to increasing interest in heavy metals biosensor development, we engaged with electrochemical determination of heavy metals by means of their interaction with a phytochelatin (PC2)-modified mercury electrode. Basic electrochemical behaviour of heavy metal binding thiols (e.g., glutathione, phytochelatin, metallothionein) has already been studied by many techniques such as chronopotentiometric stripping analysis [23,24,63-64], cyclic voltammetry [18,25,65-66] and differential pulse voltammetry [67-70]. Primarily, it was necessary to observe in detail the electrochemical behaviour of PC2 on the surface of hanging mercury electrode (HMDE) by differential pulse voltammetry in combination with adsorptive transfer stripping technique (AdTS DPV) with the view to use them for construction of a heavy metal biosensor because the AdTS DPV technique has not been used for these purposes yet.

Adsorptive transfer stripping technique as a base of electrochemical biosensor

Adsorptive transfer stripping technique (AdTS) was developed as a suitable tool for electrochemical detection of biomolecules such as proteins, peptides and/or DNA [29,71-79]. Principle of the technique is in an adsorbing of studied analyte on surface of the working electrode – in our case of HMDE at open electrode system; see Figure 2A2.
After the absorbing, the electrode is removed from the solution and redundance of analyte is washed from the surface of the working electrode in buffer (Figure 2A3). The adsorbed analyte is finally detected in the presence of an indifferent electrolyte (Figure 2A4). It was proved that during the described process running on the surface of HMDE, only one assembled layer of the adsorbed analyte, which can be bio-macromolecules species and/or compounds capable of adsorbing on the electrode surface, could form [80]. On the base of the above-mentioned description of the transfer technique, we were concerned with the possibility of using of a peptide (PC2) modified HMDE surface for heavy metals determination. Primarily, we focused on the optimisation of the modification of the electrode surface by phytochelatin.

Using the adsorptive transfer stripping technique for determination of phytochelatin

An electrochemical behaviour of the phytochelatin 2 (key plant peptide binding heavy metals; PC2) was studied on the surface of the HMDE by differential pulse voltammetry (DPV) in combination with adsorptive transfer stripping technique (AdTS). The voltammogram of 500 μM PC2 accumulated on the HMDE surface during the time of 120 s and analysed in 0.5 M NaCl (pH 6.4) is shown in Figure 2B. On the obtained record, we observed the signal at potential –0.57 V, which probably correspond to adduct of the PC2 with mercury on the surface of the HMDE (HS-peptide + Hg = HgS-peptide) [81-82].
It was necessary to know the way of probable interaction of peptide with the working electrode surface with the view to use the modified HMDE as a suitable toll for detection of heavy metals. On the most important index of status of electrode, the double-layer is dependent on the current response on the accumulation time [80,83]. An influence of the accumulation time of PC2 at 1 mM and 10 μM concentrations on the electrochemical response (current height of PC2 signal) was studied. The observed dependence at 1 mM PC2 concentration steeply increased up to 240 s and resembled to the Langmuir isotherm (Figure 2Ca). From the obtained results it follows that the signal of PC2 increased up to 240 s of the peptide accumulation time, which is probably connected with sequent filling up of the electrode surface. The maximum of the presented curve at 240 s probably relates with needed time for filling up of the HMDE electrode surface by one layer of PC2 – surface assembled monolayer (SAM) [84]. After 240 s, the signal of adsorbed peptide did not increase, contrariwise decreased, which probably relates with formation of the poly-layer of the PC2 on the HMDE surface – decreasing the possibility of the detection of adsorbed molecules. In the case of lower tested PC2 concentration (10 μM), we observed the increase of PC2 peak height with increasing accumulation time at all tested values (Figure 2C(a)). In addition, we indeed observed very low increase of the peak height (about 4 %) from the accumulation time of 360 s. Due to using of PC2 at 1 mM concentration for the determination of heavy metals, we used the accumulation time of 240 s, because up this time the surface assembled monolayer is formed.
The next important index of behaviour of phytochelatin on the HMDE surface was the change of PC2 current response according to its different concentrations. At the accumulation time of 240 s, concentrations of PC2 varying from 2.5 to 1000 μM were tested (Figure 2C(b)). The obtained dependence set from the obtained PC2 current responses according to its different concentrations was linear in the concentration range 0 – 40 μM (y = 0.0894 + 0.0621; R2 = 0.9969, inset in Figure 2C(b)). In addition, we observed a decrease of the current responses from the PC2 concentration of 100 μM. This phenomenon probably relates with a forming of poly-layer on the electrode surface [80,83,85].

Modification of the HMDE surface by phytochelatin

For our purposes, we used the HMDE as the physical-chemical part and phytochelatin 2, which is able to bind heavy metals [68,70,86-93], as the biological part of the suggested heavy metals biosensor. That is why we could suggest following experiments: i) on the HMDE surface adsorb PC2; ii) remove redundant PC2; iii) expose the adsorbed PC2 to interaction with heavy metal; iv) detect changes in the signals of PC2 (Figure 2D). We selected for our purposes two heavy metals – cadmium and zinc.
That is why we were interested if free ions of selected heavy metal are able to adsorption and transfer on the HMDE surface. If we accumulated (120 s) only free ions of Cd(II) and/or Zn(II) without MT on the surface of the mercury working electrode, we did not observe any signal corresponding to heavy metal species (not shown). The described effect prove that free ions of heavy metals are not able to transfer and consequently to detect.

Electrochemical behaviour of phytochelatin-modified HMDE in presence of Cd(II) and Zn(II)

Phytochelatin 2 (1 mM) was adsorbed on the HMDE surface for the duration of 240 s. Then, the modified electrode was washed in the basic electrolyte solution and consequently, interacted with 500 μM of Cd(II) and/or Zn(II) for the duration of 300 s that was established as the most effective. The obtained voltammograms are shown in Figure 3A (Cd) and 4B (Zn). In the presence of Cd(II) we recorded except original signal PC2 also another two signals that we named CdPC2 (–0.76 V) and PC2(Cd) (–0.45 V). In addition, we observed a linear decrease of PC2 signal and increase of CdPC2 and PC2(Cd) signals according to the rise of Cd(II) added concentration. The equations of the mentioned rising linear curves were in case of CdPC2: y = 0.0128x + 0.2085; R2 = 0.9918; and PC2(Cd): y = 0.0999x - 4.8325; R2 = 0.9997. The detection limit (3 S/N) of Cd(II) calculated from increase of PC2(Cd) peak was about 1.055 pmole in 5 μl (0.211 μM); see Figure 3C.
In the case of Zn(II) determination by PC2 modified HMDE, we observed only one additive signal, which was named ZnPC2: –1.09 V, in comparison with control detection of PC2 without interaction with Zn(II). The signal of PC2 linear decreased and ZnPC2 signal linearly increased (y = 0.8496x -18.598, R2 = 0.9961) according to rising Zn(II) concentration. The detection limit (3 S/N) of Zn(II) calculated from increase of ZnPC2 peak was about 13.30 pmole in 5 μl (2.66 μM); see Figure 3D.

Determination of Cd(II) and Zn(II) by PC2 modified HMDE in biological matrix

We decided to test our peptide-modified heavy metal biosensor by means of detection of Cd(II) and/or Zn(II) in the presence of the biological matrix (human urine). In the concrete, PC2 (1 mM) was adsorbed (240 s) on the HMDE surface, washed (0.5 NaCl) and then the modified electrode interacted with Cd(II) and/or Zn(II) in the presence of human urine (10× diluted) for the duration of 300 s. Subsequently, the electrode was washed (0.5 NaCl) and placed to an electrochemical cell-containing supporting electrolyte (0.5 M NaCl; pH = 6.4). Human urine contained additions of Cd(II) and/or Zn(II) at concentrations (25, 50, 100, 225, 400, 600 and/or 50, 100, 200, 400, 600, 800 μM, respectively). All studied signals embodied very similar electrochemical behaviour in the course of their analysis both in buffered solution and biological matrix (not shown). The only two differences between analysis in buffered and non-buffered medium, which we found out, are peak heights and their relationship. In the presence of human urine, heights of all studied signals were lower than in the buffered medium – sodium chloride (differences from 10 to 15%). This effect is probably caused by impurities included with real sample that may complex with heavy metal ions.

Using of peptide-modified HMDE to study of anticancer drug – cis-platin

We attempted to use our suggested peptide modified heavy metal biosensor for the determination of the anticancer drug – cis-platin [PtII (NH3)2Cl2]0; MW 303. A prepared solution of Pt complex interacted with PC2 modified HMDE for the duration of 300 s. A resulting voltammogram is shown in Figure 4A. A phytochelatin-modified HMDE surface formed with presented Pt complex that we detected at potential –0.96 V and named as PtPC2. In addition, we studied the influence of different durations of interaction between the PC2-modified electrode surface and Pt on height of the presented PtPC2 signal. We selected a duration of 300 s as most suitable for the Pt complex interaction with the PC2-modified electrode surface (not shown). The dependence of heights of the PC2 and PtPC2 signals on cis-platin concentration is shown in Figure 4B. The PC2 signal decreased and PtPC2 linearly increased (y = 0.0532x - 5.7079; R2 = 0.9946) in the studied concentration of cis-platin varying from 100 to 750 μM. The detection limit (3 S/N) of cis-platin ([PtII(NH3)2Cl2]0) calculated from increase of PtPC2 peak was about 1.958 pmole in 5 μl (0.392 μM) at the interaction time of 300 s.

Conclusions

A development of easy and rapid renewable sensors for the detection of different species is one of the most important tasks of analytical chemistry and biochemistry. We suggested a simple sensor for the determination of Cd(II) and Zn(II) using a modification of the hanging mercury drop electrode surface by phytochelatin. The main advantage of using HMDE in comparison with other solid electrodes (carbon, gold and so on) is sensitivity. On the basis of the obtained results we propose that the suggested technique offers simple, rapid, and low-cost detection of heavy metals in environmental, biological, and medical samples.

Acknowledgments

This work was supported by grants: GA CR No. 525/04/P132 and FRVS 2348/2005.

References

  1. Zehnalek, J.; Adam, V.; Kizek, R. Influence of heavy metals on production of protecting compounds in agriculture plants. Listy Cukrov 2004, 120, 222. [Google Scholar]
  2. Zehnalek, J.; Vacek, J.; Kizek, R. Application of higher plants in phytoremetiation of heavy metals. Listy Cukrov 2004, 120, 220. [Google Scholar]
  3. Kizek, R.; Vacek, J.; Trnkova, L.; Klejdus, B.; Kuban, V. Electrochemical biosensors in agricultural and environmental analysis. Chem. Listy 2003, 97, 1003. [Google Scholar]
  4. Sures, B.; Knopf, K. Parasites as a threat to freshwater eels? Science 2004, 304, 208. [Google Scholar]
  5. Speir, T.W.; van Schaik, A.P.; Lloyd-Jones, A.R.; Kettles, H.A. Temporal response of soil biochemical properties in a pastoral soil after cultivation following high application rates of undigested sewage sludge. Biol. Fertil. Soil 2003, 38, 377. [Google Scholar]
  6. Zimmermann, S.; Sures, B. Significance of platinum group metals emitted from automobile exhaust gas converters for the biosphere. Environ. Sci. Pollut, Res. 2004, 11, 194. [Google Scholar]
  7. Sures, B.; Siddall, R.; Taraschewski, H. Parasites as accumulation indicators of heavy metal pollution. Parasitology Today 1999, 15, 16. [Google Scholar]
  8. Sures, B. Environmental parasitology: Relevancy of parasites in monitoring environmental pollution. Trends Parasitol 2004, 20, 170. [Google Scholar]
  9. Wu, A.H.B.; McKay, C.; Broussard, L.A.; Hoffman, R.S.; Kwong, T.C.; Moyer, T.P.; Otten, E.M.; Welch, S.L.; Wax, P. National academy of clinical biochemistry laboratory medicine practice guidelines: Recommendations for the use of laboratory tests to support poisoned patients who present to the emergency department. Clin. Chem. 2003, 49, 357. [Google Scholar]
  10. Nordberg, G.; Jin, T.; Leffler, P.; Svensson, M.; Zhou, T.; Nordberg, M. Metallothioneins and diseases with special reference to cadmium poisoning. Analusis 2000, 28, 396. [Google Scholar]
  11. Dong, L.M.; Yan, X.P.; Li, Y.; Jiang, Y.; Wang, S.W.; Jiang, D.Q. On-line coupling of flow injection displacement sorption preconcentration to high-performance liquid chromatography for speciation analysis of mercury in seafood. J. Chrom. A. 2004, 1036, 119. [Google Scholar]
  12. Soylak, M.; Narin, I.; Divrikli, U.; Saracoglu, S.; Elci, L.; Dogan, M. Preconcentration-separation of heavy metal ions in environmental samples by membrane filtration-atomic absorption spectrometry combination. Anal. Letters 2004, 37, 767. [Google Scholar]
  13. Apostoli, P. Elements in environmental and occupational medicine. J. Chrom. B 2002, 778, 63. [Google Scholar]
  14. Lewen, N.; Mathew, S.; Schenkenberger, M.; Raglione, T. A rapid ICP-MS screen for heavy metals in pharmaceutical compounds. J. Pharm. Biomed. Anal. 2004, 35, 739. [Google Scholar]
  15. Karami, H.; Mousavi, M.F.; Yamini, Y.; Shamsipur, M. On-line preconcentration and simultaneous determination of heavy metal ions by inductively coupled plasma-atomic emission spectrometry. Anal. Chim. Acta 2004, 509, 89. [Google Scholar]
  16. Zhang, B.; Li, F.M.; Houk, R.S.; Armstrong, D.W. Pore exclusion chromatography-inductively coupled plasma-mass spectrometry for monitoring elements in bacteria: A study on microbial removal of uranium from aqueous solution. Anal. Chem. 2003, 75, 6901. [Google Scholar]
  17. Szlyk, E.; Szydlowska-Czerniak, A. Determination of cadmium, lead, and copper in margarines and butters by galvanostatic stripping chronopotentiometry. J. Agr. Food Chem. 2004, 52, 4064. [Google Scholar]
  18. Vacek, J.; Petrek, J.; Kizek, R.; Havel, L.; Klejdus, B.; Trnkova, L.; Jelen, F. Electrochemical determination of lead and glutathione in a plant cell culture. Bioelectrochemistry 2004, 63, 347. [Google Scholar]
  19. Mikkelsen, O.; Schroder, K.H. Amalgam electrodes for electroanalysis. Electroanalysis 2003, 15, 679. [Google Scholar]
  20. Baldo, M.A.; Daniele, S.; Ciani, I.; Bragato, C.; Wang, J. Remote stripping analysis of lead and copper by a mercury-coated platinum microelectrode. Electroanalysis 2004, 16, 360. [Google Scholar]
  21. Pei, J.H.; Tercier-Waeber, M.L.; Buffle, J. Simultaneous determination and speciation of zinc, cadmium, lead, and copper in natural water with minimum handling and artifacts, by voltammetry on a gel-integrated microelectrode array. Anal. Chem. 2000, 72, 161. [Google Scholar]
  22. Kizek, R.; Vacek, J.; Trnková, L.; Klejdus, B.; Havel, L. Application of catalytic reactions on a mercury electrode for metallothionein electrochemical detection. Chem. Listy 2004, 98, 160. [Google Scholar]
  23. Strouhal, M.; Kizek, R.; Vacek, J.; Trnková, L.; Němec, M. Electrochemical study of heavy metals and metallothionein in yeast Yarrowia lipolytica. Bioelectrochemistry 2003, 60, 29. [Google Scholar]
  24. Trnkova, L.; Kizek, R.; Vacek, J. Catalytic signal of rabbit liver metallothionein on a mercury electrode: A combination of derivative chronopotentiometry with adsorptive transfer stripping. Bioelectrochemistry 2002, 56, 57. [Google Scholar]
  25. Šestáková, I.; Vodičková, H.; Mader, P. Voltammetric methods for speciation of plant metallothioneins. Electroanalysis 1998, 10, 764. [Google Scholar]
  26. Fojta, M. Electrochemical sensors for DNA interactions and damage. Electroanalysis 2002, 14, 1449. [Google Scholar]
  27. Cukrowska, E.; Trnkova, L.; Kizek, R.; Havel, J. Use of artificial neural networks for the evaluation of electrochemical signals of adenine and cytosine in mixtures interfered with hydrogen evolution. J. Electroanal. Chem. 2001, 503, 117. [Google Scholar]
  28. Kizek, R.; Trnkova, L.; Sevcikova, S.; Smarda, J.; Jelen, F. Silver electrode as a sensor for determination of zinc in cell cultivation medium. Anal. Biochem. 2002, 301, 8. [Google Scholar]
  29. Fojta, M.; Havran, L.; Kizek, R.; Billova, S.; Palecek, E. Multiply osmium-labeled reporter probes for electrochemical DNA hybridization assays: Detection of trinucleotide repeats. Biosen. Bioelectron. 2004, 20, 985. [Google Scholar]
  30. Babkina, S.S.; Ulakhovich, N.A. Amperometric biosensor based on denatured DNA for the study of heavy metals complexing with DNA and their determination in biological, water and food samples. Bioelectrochemistry 2004, 63, 261. [Google Scholar]
  31. Rodriguez-Mozaz, S.; Marco, M.P.; de Alda, M.J.L.; Barcelo, D. Biosensors for environmental applications: Future development trends. Pure Appl. Chem. 2004, 76, 723. [Google Scholar]
  32. Berggren, C.; Bjarnason, B.; Johansson, G. Capacitive biosensors. Electroanalysis 2001, 13, 173. [Google Scholar]
  33. Lu, Y.; Liu, J.W.; Li, J.; Bruesehoff, P.J.; Pavot, C.M.B.; Brown, A.K. New highly sensitive and selective catalytic DNA biosensors for metal ions. Biosen. Bioelectron. 2003, 18, 529. [Google Scholar]
  34. Aiken, A.M.; Peyton, B.M.; Apel, W.A.; Petersen, J.N. Heavy metal-induced inhibition of Aspergillus niger nitrate reductase: Applications for rapid contaminant detection in aqueous samples. Anal. Chim. Acta 2003, 480, 131. [Google Scholar]
  35. Dzyadevych, S.V.; Soldatkin, A.P.; Korpan, Y.I.; Arkhypova, V.N.; El'skaya, A.V.; Chovelon, J.M.; Martelet, C.; Jaffrezic-Renault, N. Biosensors based on enzyme field-effect transistors for determination of some substrates and inhibitors. Anal. Bioanal. Chem. 2003, 377, 496. [Google Scholar]
  36. Han, S.B.; Zhu, M.; Yuan, Z.B.; Li, X. A methylene blue-mediated enzyme electrode for the determination of trace mercury(II), mercury(I), methylmercury, and mercury-glutathione complex. Biosen. Bioelectron. 2001, 16, 9. [Google Scholar]
  37. Krajewska, B.; Zaborska, W.; Chudy, M. Multi-step analysis of Hg2+ ion inhibition of jack bean urease. J. Inorg. Biochem. 2004, 98, 1160. [Google Scholar]
  38. Kuswandi, B. Simple optical fibre biosensor based on immobilised enzyme for monitoring of trace heavy metal ions. Anal. Bioanal. Chem. 2003, 376, 1104. [Google Scholar]
  39. Horswell, J.; Speir, T.W.; van Schaik, A.P. Bio-indicators to assess impacts of heavy metals in land-applied sewage sludge. Soil Biol. Biochem. 2003, 35, 1501. [Google Scholar]
  40. Qian, Z.R.; Tan, T.C. BOD measurement in the presence of heavy metal ions using a thermally-killed-Bacillus subtilis biosensor. Water Res. 1999, 33, 2923. [Google Scholar]
  41. Bontidean, I.; Lloyd, J.R.; Hobman, J.L.; Wilson, J.R.; Csoregi, E.; Mattiasson, B.; Brown, N.L. Bacterial metal-resistance proteins and their use in biosensors for the detection of bioavailable heavy metals. J. Inorg. Biochem. 2000, 79, 225. [Google Scholar]
  42. Wu, C.-M.; Lin, L.-Y. Immobilization of metallothionein as a sensitive biosensor chip for the detection of metal ions by surface plasmon resonance. Biosen. Bioelectron. 2004, 4, 864. [Google Scholar]
  43. Bontidean, I.; Ahlqvist, J.; Mulchandani, A.; Chen, W.; Bae, W.; Mehra, R.K.; Mortari, A.; Csoregi, E. Novel synthetic phytochelatin-based capacitive biosensor for heavy metal ion detection. Biosen. Bioelectron. 2003, 18, 547. [Google Scholar]
  44. Bae, W.; Chen, W.; Mulchandani, A.; Mehra, R.K. Enhanced bioaccumulation of heavy metals by bacterial cells displaying synthetic phytochelatins. Biotechnol. Bioeng. 2000, 70, 518. [Google Scholar]
  45. Cobbett, C.S. Phytochelatin biosynthesis and function in heavy-metal detoxification. Curr. Opin. Plant Biol. 2000, 3, 211. [Google Scholar]
  46. di Toppi, S.L.; Gabbrielli, R. Response to cadmium in higher plants. Environ. Exp. Bot. 1999, 41, 105. [Google Scholar]
  47. Zenk, M.H. Heavy metal detoxification in higher plants – a review. Gene 1996, 179, 21. [Google Scholar]
  48. Cobbett, C.S.; Goldsbrough, P.B. Phytochelatins and metallothioneins: Roles in heavy metal detoxification and homeostasis. Annu. Rev. Plant Biol. 2002, 53, 159. [Google Scholar]
  49. Grill, E.; Winnacker, E.-L.; Zenk, M.H. Phytochelatins: The principal heavy-metal complexing peptides of higher plants. Science 1985, 320, 674. [Google Scholar]
  50. Townsend, D.M.; Tew, K.D.; Tapiero, H. The importance of glutathione in human disease. Biomed. Pharmacother. 2003, 57, 145. [Google Scholar]
  51. Sastre, J.; Pallardo, F.V.; Vina, J. Glutathione, oxidative stress and aging. Age 1996, 19, 129. [Google Scholar]
  52. Kizek, R.; Vacek, J.; Trnkova, L.; Jelen, F. Cyclic voltammetric study of the redox system of glutathione using the disulfide bond reducant tris(2-carboxythhyl)phosphine. Bioelectrochemistry 2004, 63, 19. [Google Scholar]
  53. Dolezel, P.; Kuban, V. Mass spectrometric study of platinum complexes based on cisplatin. Chem. Pap-Chem. Zvesti. 2002, 56, 236. [Google Scholar]
  54. Palchetti, I.; Marrazza, G.; Mascini, M. New procedures to obtain electrochemical sensors for heavy metal detection. Anal. Lett. 2001, 34, 813. [Google Scholar]
  55. Tsai, H.C.; Doong, R.A.; Chiang, H.C.; Chen, K.T. Sol-gel derived urease-based optical biosensor for the rapid determination of heavy metals. Anal. Chim. Acta 2003, 481, 75. [Google Scholar]
  56. May, L.M.; Russell, D.A. Novel determination of cadmium ions using an enzyme self-assembled monolayer with surface plasmon resonance. Anal. Chim. Acta 2003, 500, 119. [Google Scholar]
  57. Leth, S.; Maltoni, S.; Simkus, R.; Mattiasson, B.; Corbisier, P.; Klimant, I.; Wolfbeis, O.S.; Csoregi, E. Engineered bacteria based biosensors for monitoring bioavailable heavy metals. Electroanalysis 2002, 14, 35. [Google Scholar]
  58. Lehmann, M.; Riedel, K.; Adler, K.; Kunze, G. Amperometric measurement of copper ions with a deputy substrate using a novel Saccharomyces cerevisiae sensor. Biosen. Bioelectron. 2000, 15, 211. [Google Scholar]
  59. Kukla, A.L.; Kanjuk, N.I.; Starodub, N.F.; Shirshov, Y.M. Multienzyme electrochemical sensor array for determination of heavy metal ions. Sens. Actuators B 1999, 57, 213. [Google Scholar]
  60. Gooding, J.J.; Hibbert, D.B.; Yang, W. Electrochemical metal ion sensors. Exploiting amino acids and peptides as recognition elements. Sensors 2001, 1, 75. [Google Scholar]
  61. Corbisier, P.; van der Lelie, D.; Borremans, B.; Provoost, A.; de Lorenzo, V.; Brown, N.L.; Lloyd, J.R.; Hobman, J.L.; Csoregi, E.; Johansson, G.; Mattiasson, B. Whole cell- and protein-based biosensors for the detection of bioavailable heavy metals in environmental samples. Anal. Chim. Acta 1999, 387, 235. [Google Scholar]
  62. Brabec, V. DNA sensor for the determination of antitumor platinum compounds. Electrochim. Acta 2000, 45, 2929. [Google Scholar]
  63. Kizek, R.; Trnkova, L.; Palecek, E. Determination of metallothionein at the femtomole level by constant current stripping chronopotentiometry. Anal. Chem. 2001, 73, 4801. [Google Scholar]
  64. Tomschik, M.; Havran, L.; Palecek, E.; Heyrovský, M. The “presodium” catalysis of electroreduction of hydrogn ions on mercury electrodes by metallothionein. An investigation by constant current derivative stripping chronopotentiometry. Electroanalysis 2000, 12, 274. [Google Scholar]
  65. Sestaková, I.; Mader, P. Voltammetry on mercury and carbon electrodes as a tool for studies of metallothionein interactions with metal ions. Cell. Mol. Biol. 2000, 46, 257. [Google Scholar]
  66. Yosypchuk, B.; Novotny, L. Cathodic stripping voltammetry of cysteine using silver and copper solid amalgam electrodes. Talanta 2002, 56, 971. [Google Scholar]
  67. Erk, M.; Ivankovic, D.; Raspor, B.; Pavicic, J. Evaluation of different purification procedures for the electrochemical quantification of mussel metallothioneins. Talanta 2002, 57, 1211. [Google Scholar]
  68. Díaz-Cruz, M.S.; Mendieta, J.; Esteban, M. Combined use of differential pulse plarography and multivariate curve resolution: As applied to the study of metal mixed comples of the metallohionein related hexapeptide Lys-Cys-Thr-Cys-Cys-Ala. Electroanalysis 2002, 14, 50. [Google Scholar]
  69. Yosypchuk, B.; Sestakova, I.; Novotny, L. Voltammetric determination of phytochelatins using copper solid amalgam electrode. Talanta 2003, 59, 1253. [Google Scholar]
  70. Díaz-Cruz, M.S.; Mendieta, J.; Tauler, R.; Esteban, M. Cadmium-binding properties of glutathione: A chemometrical analysis of voltammetric data. J. Inorg. Biochem. 1997, 66, 29. [Google Scholar]
  71. Palecek, E.; Postbieglová, I. Adsorptive stripping voltammetry of bimacromolecules with transfer of the adsorbed layer. J. Electroanal Chem. 1986, 214, 359. [Google Scholar]
  72. Palecek, E. Adsorptive transfer stripping voltammetry: Effect of electrode potential on the structure of DNA adsorbed at the mercury surface. Biolectrochem. Bioenerg. 1992, 28, 71. [Google Scholar]
  73. Palecek, E. New trends in electrochemical analysis of nucleic acids. Bioelectrochem. Bioenerg. 1988, 20, 179. [Google Scholar]
  74. Palecek, E. Adsorptive transfer stripping voltammetry - determination of nanogram quanitities of DNA immobilized at the electrode surface. Anal. Biochem. 1988, 170, 421. [Google Scholar]
  75. Fojta, M.; Havran, L.; Billova, S.; Kostecka, P.; Masarik, M.; Kizek, R. Two-surface strategy in electrochemical DNA hybridization assays: Detection of osmium-labeled target DNA at carbon electrodes. Electroanalysis 2003, 15, 431. [Google Scholar]
  76. Ozkan, D.; Kara, P.; Kerman, K.; Meric, B.; Erdem, A.; Jelen, F.; Nielsen, P.E.; Ozsoz, M. DNA and PNA sensing on mercury and carbon electrodes by using methylene blue as an electrochemical label. Bioelectrochemistry 2002, 58, 119. [Google Scholar]
  77. Palecek, E.; Jelen, F.; Postbieglova, I. Adsorptive transfer stripping voltammetry offers new possibilities in DNA research. Studia Biophysica 1989, 130, 51. [Google Scholar]
  78. Jelen, F.; Tomschik, M.; Palecek, E. Adsorptive stripping square-wave voltammetry of DNA. J. Electroanal. Chem. 1997, 423, 141. [Google Scholar]
  79. Fojta, M.; Havran, L.; Fulneckova, J.; Kubicarova, T. Adsorptive transfer stripping AC voltammetry of DNA complexes with intercalators. Electroanalysis 2000, 12, 926. [Google Scholar]
  80. Kizek, R.; Havran, L.; Kubicarova, T.; Yosypchuk, B.; Heyrovsky, M. Voltammetry of two single-stranded isomeric end-labeled -SH deoxyoligonucleotides on mercury electrodes. Talanta 2002, 56, 915. [Google Scholar]
  81. Heyrovsky, M. Early polarographic studies on proteins. Electroanalysis 2004, 16, 1067. [Google Scholar]
  82. Heyrovsky, M.; Mader, P.; Vavřička, S.; Veselá, V.; Fedurco, M. The anodic reactions at mercury electrode due to cysteine. J. Electroanal. Chem. 1997, 430, 103. [Google Scholar]
  83. Kelley, S.O.; Jackson, N.M.; Hill, M.G.; Barton, J.K. Long-range electron transfer through DNA films. Angewandte Chemie-International Edition 1999, 38, 941. [Google Scholar]
  84. Tlili, A.; Abdelghani, A.; Hleli, S.; Maaref, M.A. Electrical characterization of a thiol SAM on gold as a first step for the fabrication of an immunosensors based on a quartz crystal microbalance. Sensors 2004, 4, 105. [Google Scholar]
  85. Fawcett, W.R.; Fedurco, M.; Kovacova, Z.; Borkowska, Z. Adsorption study of cysteine, N-acetylcystamine, cysteinesulpfinic acid and cysteic acid on a polycrystalline gold electrode. J. Electroanal. Chem. 1994, 368, 275. [Google Scholar]
  86. Dabrio, M.; Rodriguez, A.R. Complexing properties of the beta metallothionein domain with cadmium and/or zinc, studied by differential pulse polarography. Analusis 2000, 28, 370. [Google Scholar]
  87. Dabrio, M.; Rodriguez, A.R. Electrochemical study of human foetal liver metallothionein: Influence of the additions of cadmium and zinc. Anal. Chim. Acta 2000, 406, 171. [Google Scholar]
  88. Dabrio, M.; Rodriguez, A.R. Study of complexing properties of the a-metallothionein domain with cadmium and/or zinc, using differential pulse polarography. Anal. Chim. Acta 2000, 424, 77. [Google Scholar]
  89. Dabrio, M.; Rodriguez, A.R.; Bordin, G.; Bebianno, M.J.; De Ley, M.; Sestakova, I.; Vašák, M.; Nordberg, M. Recent developments in quantification methods for metallothionein. J. Inorg. Biochem. 2002, 88, 123. [Google Scholar]
  90. Dabrio, M.; Van Vyncht, G.; Bordin, G.; Rodriguez, A.R. Study of complexing properties of the alpha and beta metallothionein domains with cadmium and/or zinc using electrospray ionisation mass spectrometry. Anal. Chim. Acta 2001, 435, 319. [Google Scholar]
  91. Diaz-Cruz, M.S.; Diaz-Cruz, J.M.; Mendieta, J.; Tauler, R.; Esteban, M. Soft- and hard-modeling approaches for the determination of stability constants of metal-peptide systems by voltammetry. Anal. Biochem. 2000, 279, 189. [Google Scholar]
  92. Diaz-Cruz, M.S.; Esteban, M.; Rodriguez, A.R. Square wave voltammetry data analysis by multivariate curve resolution: application to the mixed-metal system. Anal. Chim. Acta 2001, 428, 285. [Google Scholar]
  93. Diaz-Cruz, M.S.; Mendieta, J.; Monjonell, A.; Tauler, R.; Esteban, M. Study of the zinc-binding properties of glutathione by differential pulse polarography and multivariate curve resolution. J. Inorg. Biochem. 1998, 70, 91. [Google Scholar]
Figure 1. Chemical structure of phytochelatin (A). Scheme of basic principle of biosensor for heavy metals detection (B).
Figure 1. Chemical structure of phytochelatin (A). Scheme of basic principle of biosensor for heavy metals detection (B).
Sensors 05 00070f1
Figure 2. Scheme of adsorptive transfer stripping technique used for the detection of peptide – phytochelatin; (1) renewing of hanging mercury drop electrode (HMDE) surface; (2) adsorbing of PC2 in a drop solution onto HMDE surface; (3) washing electrode in sodium chloride (0.5 M, pH 6.4); (4) measurement of PC2 by differential pulse voltammetry (DPV) in 0.5 M sodium chloride, pH 6.4 (A). Typical DPV voltammograms of 500 μM PC2 (B) obtained by AdTS DPV technique. DPV parameters were as follows: an initial potential of –1.2 V, an end potential –0.3 V, a modulation time 0.057 s, a time interval 0.2 s, a step potential of 1.05 mV/s, a modulation amplitude of 250 mV, an accumulation time of 120 s. Dependence of PC2 peak height on accumulation time at its two different concentrations – 1 mM and 10 μM (Ca). Influence of phytochelatin concentrations on PC2 peak height (Cb and inset in Cb). Inset in Figure Cb: peak of PC2 (17 μM – 90 pmol of PC2 in 5 μl drop) after baseline correction. Scheme of adsorptive transfer stripping technique used for the detection of heavy metals; (1) renewing of hanging mercury drop electrode (HMDE) surface; (2) adsorbing of PC2 in a drop solution onto HMDE surface; (3) washing electrode in sodium chloride (0.5 M, pH 6.4); (4) interaction of heavy metal (cadmium and/or zinc) in a drop solution with peptide modified HMDE surface; (5) washing electrode in sodium chloride (0.5 M, pH 6.4); (6) measurement of PC2 by DPV in 0.5 M sodium chloride, pH 6.4 (D).
Figure 2. Scheme of adsorptive transfer stripping technique used for the detection of peptide – phytochelatin; (1) renewing of hanging mercury drop electrode (HMDE) surface; (2) adsorbing of PC2 in a drop solution onto HMDE surface; (3) washing electrode in sodium chloride (0.5 M, pH 6.4); (4) measurement of PC2 by differential pulse voltammetry (DPV) in 0.5 M sodium chloride, pH 6.4 (A). Typical DPV voltammograms of 500 μM PC2 (B) obtained by AdTS DPV technique. DPV parameters were as follows: an initial potential of –1.2 V, an end potential –0.3 V, a modulation time 0.057 s, a time interval 0.2 s, a step potential of 1.05 mV/s, a modulation amplitude of 250 mV, an accumulation time of 120 s. Dependence of PC2 peak height on accumulation time at its two different concentrations – 1 mM and 10 μM (Ca). Influence of phytochelatin concentrations on PC2 peak height (Cb and inset in Cb). Inset in Figure Cb: peak of PC2 (17 μM – 90 pmol of PC2 in 5 μl drop) after baseline correction. Scheme of adsorptive transfer stripping technique used for the detection of heavy metals; (1) renewing of hanging mercury drop electrode (HMDE) surface; (2) adsorbing of PC2 in a drop solution onto HMDE surface; (3) washing electrode in sodium chloride (0.5 M, pH 6.4); (4) interaction of heavy metal (cadmium and/or zinc) in a drop solution with peptide modified HMDE surface; (5) washing electrode in sodium chloride (0.5 M, pH 6.4); (6) measurement of PC2 by DPV in 0.5 M sodium chloride, pH 6.4 (D).
Sensors 05 00070f2
Figure 3. Phytochelatin. Typical DPV voltammograms of 1 mM PC2 without addition of Cd(II) and 1 mM PC2 + 60 μM cadmium ions (A), and 1 mM PC2 without addition of Zn(II) and 1 mM PC2 + 500 μM zinc ions (B). DPV parameters: time of accumulation 240 s, time of interaction 300 s. Dependence of CdPC2, PC2(Cd) and PC2 peak heights on interaction time (C). Dependence of ZnPC2 and PC2 peak heights on interaction time (D). PC2 concentration: 1 mM. For other details, see Figure 2.
Figure 3. Phytochelatin. Typical DPV voltammograms of 1 mM PC2 without addition of Cd(II) and 1 mM PC2 + 60 μM cadmium ions (A), and 1 mM PC2 without addition of Zn(II) and 1 mM PC2 + 500 μM zinc ions (B). DPV parameters: time of accumulation 240 s, time of interaction 300 s. Dependence of CdPC2, PC2(Cd) and PC2 peak heights on interaction time (C). Dependence of ZnPC2 and PC2 peak heights on interaction time (D). PC2 concentration: 1 mM. For other details, see Figure 2.
Sensors 05 00070f3
Figure 4. Cis-platin – [PtII (NH3)2Cl2]0; anticancer drug. Typical DPV voltammograms of 1 mM PC2 without addition of cis-platin and 1 mM PC2 + 750 μM of cis-platin (A). DPV parameters: time of accumulation 240 s, time of interaction 300 s. Dependences of PtPC2 and PC2 peak heights on different concentration of cis-platin (B). PC2 concentration: 1 mM. DPV parameters: time of accumulation 240 s, time of interaction 300 s. For other details, see Figure 2.
Figure 4. Cis-platin – [PtII (NH3)2Cl2]0; anticancer drug. Typical DPV voltammograms of 1 mM PC2 without addition of cis-platin and 1 mM PC2 + 750 μM of cis-platin (A). DPV parameters: time of accumulation 240 s, time of interaction 300 s. Dependences of PtPC2 and PC2 peak heights on different concentration of cis-platin (B). PC2 concentration: 1 mM. DPV parameters: time of accumulation 240 s, time of interaction 300 s. For other details, see Figure 2.
Sensors 05 00070f4

Share and Cite

MDPI and ACS Style

Adam, V.; Zehnalek, J.; Petrlova, J.; Potesil, D.; Sures, B.; Trnkova, L.; Jelen, F.; Vitecek, J.; Kizek, R. Phytochelatin Modified Electrode Surface as a Sensitive Heavy- Metal Ion Biosensor. Sensors 2005, 5, 70-84. https://doi.org/10.3390/s5010070

AMA Style

Adam V, Zehnalek J, Petrlova J, Potesil D, Sures B, Trnkova L, Jelen F, Vitecek J, Kizek R. Phytochelatin Modified Electrode Surface as a Sensitive Heavy- Metal Ion Biosensor. Sensors. 2005; 5(1):70-84. https://doi.org/10.3390/s5010070

Chicago/Turabian Style

Adam, Vojtech, Josef Zehnalek, Jitka Petrlova, David Potesil, Bernd Sures, Libuse Trnkova, Frantisek Jelen, Jan Vitecek, and Rene Kizek. 2005. "Phytochelatin Modified Electrode Surface as a Sensitive Heavy- Metal Ion Biosensor" Sensors 5, no. 1: 70-84. https://doi.org/10.3390/s5010070

Article Metrics

Back to TopTop