This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/).

There are four mistakes at the table derived from the (c) surface slope of Figure 4 in [1]. The direction numbers are derived according to (a) slope directions. The overall direction number should be changed from 6 to 4. The distinct direction number between the 1st and 2nd subcells should be changed from 0 to 8. The distinct direction number between the 2nd and 3rd subcells should be changed from 8 to 4. The distinct direction number between the 3rd and 4th subcells should be changed from 4 to 6. The authors would like to apologize for any inconvenience this may have caused to the readers of this journal.

The new figure is provided below:

ReferenceLeeY.JungY.J.NamK.W.NittelS.BeardK.RyuK.H.Geosensor Data Representation Using Layered Slope GridsFigure

The layered slopes for data abstraction in a cell.